Products

Single pole rocker switch, switch design - OFF with plug connections suitable for modelsKorg Poly 61Korg Part Number: 375046006A / 250VACTermination plug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested  Mechanical description:Housing material is NYLON 66. This switch is provided for a snap-in mounting and there are corresponding spring lips on the narrow side of the housing . The housing cutout for installation should be 19.30 mm x 12.90 mmDimensions of the switch are width of 12,90 mm, length is 18,60 mm and higth is 13,70 mm plus 2 mm hight for rocker. The outside dimensions are 21 mm x 15 mm.Elektrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made via plug boots with 4.80 mm in width. The connection length is 7 mm.The electrical load is 6 A at 250 VAC.For switch replacement no special tools are needed because everything is plugged or clamped.

1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m

AC Power Inlet with AMP Connectortechnical Dates:Termination AMP Socket 4,3 mm  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with AMP Sockets.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland EP7 IItechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

No longer available!Digital-Analog-Converter AK4396VF for audio application from AKM (Asahi Kasehi) - compatible with AK4393VF Resolution:                    24bitInterface:                      seriellCase:                           VSOP28Mechanical Description:The digital to analog converter is housed in a VSOP28 package and is designed for surface mounting on a circuit board. The D/A converter has 2 x 14 connecting pins with grid of 0.65 mm .Technical Description:This D/A converter was developed specifically for use in audio applications. The interface is serial and provides a 24 bit resolution.   

1 pcs. Mainboard for Korg Pa900

1 piece Elko 3,300uF/35V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

Mylar Film capacitorPlastikfilm Capacitor with high stability for long life. Cheap price.For replacing craftsmanship and experience in soldering is required.""

Replacement Keys for Korg X50 KeyboardKEY ASSY 13(M) KOC-H30306-1Color: white mechanical construction: This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

Replacement Keys for RH4 KeyboardRH4 keyboard is used in Korg SP-170Korg SP-280Krome 88 Color: whiteThe RealHammer 4 keyboard (RH4) is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 22.8 cm with a width of 2.24 cm. The depth of the key is 4.5 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is formed downside the key. The Contactor is 11 cm from the front. At the back end, the keys are connected with other keys over a bridge. These keys are only available as complete set for a Octave.4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful. This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

1 pcs external Power Supply Unit Yamaha PA-300C Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Slider with 45mm Travel. Suitable for Korg TriniityThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

Complete Set 42 Taster  suitable for Yamaha  Yamaha DX7Part Number:  KA905510We offer here brand new OEM replacement parts.The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.Why should I solder new pushbutton

Complete Set tactile switch suitable for AKAI MPC-4000Part Number: :  AKAI: ES-415015J and ES-349474 and ES-337521The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

1 pcs Blue LCD Display with LED Backlight replacement including cable Kit forYamaha W5Yamaha W7We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementPlease let us know your Instrument: The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Yamaha W5 or W7:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Slidepotentiometer. Suitable for Brillinace Slider inYamaha This slider has center clickThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

Yamaha PA-150A Power Supply Unit

1 piece Elko 3,300uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

Replacement Hammer for Yamaha GHD Keyboard The Yamaha GHD Keyboard is used in two different configurations.The Keyboard is availabel with a 1 zone Hammeraction and with a 4 Zone Hammeraction.Here you will find the different Hammer for the GHD Keyboard

Replacement keys, weighted for Fatar TP10 Keyboard with pressure point Fatar TP10 keyboard is a touch sensitive keyboard with Hammer Action. The weighted Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The weighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

1 pcs. Brandnew OLED Display suitable forYamaha TX81ZThese different Display versions are available:BlueRed/OrangeYellowWhite Installation service:We are also happy to install the display for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 to 100,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

Replacement keys for Fatar TP/9P E-Piano Keyboardused inRoland A-30Roland A-33Roland A-37 Fatar TP/9P keyboard is a touch sensitive keyboard. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm.The contactor, which presses on the contact strip is 1.9 cm deep. The distance between the front contact and the front of the keyboard is 10,5 cm. The keys are in color cream white.Comment:We know three different Version of this Keyboard: TP/9S, TP/9P and TP/9+. Please have a exact look at the pictures. The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

1 pcs. Contact rubber SK30 for Technics Keyboardused in:Technics KN-720Technics KN-920Technics KN-930Technics KN-1400Technics KN-1500Technics KN-1600Technics KN-2400Technics KN-2600This are brand new contact rubbers.A contact rubber consists of 12 or 13 contacts and covers an octave. A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are usedImportant NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.