Technics Keyboards

Synth-Parts

Hammer Felt 1 for Technics E-Piano Keyboard

1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*

Synth-Parts

Hammer Felt 2 for Technics E-Piano Keyboard

Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.

€ 10 .48*

Technics

Keys for Technics Keyboard Ivory

Key: Key A

1 pcs. Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are used and in a good condition.Important NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €4.89*

€ 12 .95*

Technics

Hammer for Technics E-Piano Keyboard

Hammer: Hammer black key

Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top.

€ 9 .39*

Synth-Parts

Plastic grease for Technics Keyboards 30g

30 g can of plastic grease for Technics keyboardswe offer here a grease that is specially made for plastic parts.Especially for Technics keyboards we have collected very good experience.This plastic grease has good creep properties that are only partially desirable for a keyboard. Please apply only very sparingly so that the grease is not deposited on the felts.Not to be used for Fatar keyboards.For moving plastic parts.

€ 13 .49*

Technics

Key Guide NEW for Technics E-Piano Keyboard

Replacement–set for broken key guides on Technics electric pianosWith Technics electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for Technics, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Technics key guides in an identical way. Therefore we offer you a matched spare part set for your Technics piano in our store. Why we don't have the parts rebuilt?For the reproduction of a plastic part, an individually made injection mold must be produced. Due to the rather special shape of the original key guide, the effort is very high and expensive. This would drive up the final selling price dramatically and would simply not be profitable for us. But since we have tested our product extensively, we can sell our alternative with a clear conscience. So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. You will also receive a printed manual with the product when you order it. Included in the set:– Matched tube suitable for a keyboard with 88 keys.– Special keyboard grease– Instruction manualWhen replacing the key guides, it is necessary to grease the new parts. For this reason, a suitable grease especially for electric pianos is included in the set.

€ 37 .50*

Technics

Keys for Technics Keyboard

Key: Keys Octave Last

Replacement Keys for Technics KeyboardThese Key's are used inTechnics KN-720Technics KN-920Technics KN-930Technics KN-1400Technics KN-1500Technics KN-1600Technics KN-2400Technics KN-2600This are new key'sColor: whitemechanical construction:This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

€ 40 .89*

Technics

Contact rubber for Technics SK30 Keyboard

Rubbercontact: 12 Contacts

1 pcs. Contact rubber SK30 for Technics Keyboardused in:Technics KN-720Technics KN-920Technics KN-930Technics KN-1400Technics KN-1500Technics KN-1600Technics KN-2400Technics KN-2600This are brand new contact rubbers.A contact rubber consists of 12 or 13 contacts and covers an octave. A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

€ 12 .90*

Technics

Replacement keys for Technics SK25 Keyboard, purwhite

Key: Key A

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

€ 12 .48*

Technics

Contact rubber SK25 for E-Piano Keyboard

1 pcs Contact rubber SK25 for Technics E-PianoFor the complete exchange of the contact strips in a keyboard with 88 keys 7 contact rubbers with 12 contacts and 1 contact rubber with 4 contacts are required.

€ 12 .90*

Technics

Keys for Technics Keyboard Pure white

Key: Key A

1 pcs. Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Pure white.This parts are used and in a good condition.Important NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €4.89*

€ 12 .95*

Technics

Contact rubber Version 2 for Technics Keyboard

Rubbercontact: 6 contacts

Contact rubber Version 2 for Technics KeyboardThis contact rubber version is run without any maintenance bumps. The contact rubber is held in a special frame.For the complete exchange of the contact strips in a keyboard with 61 keys 9 contact rubbers with 6 contacts and 1 contact rubber with 7 contacts are required.Contact high: 12 mmStrip bright: 15 mmStrip length: 82 / 94 mmNumber of contacts: 6 or 7

€ 12 .90*

Technics

Keys for Technics E-Piano

Parts Keyboard: Hammer black Key

Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.

Variants from €7.40*

€ 9 .90*

Technics

Contact rubber Version 1 for Technics Keyboard

Rubbercontact: 12 Contacts

Contact rubber Version 1 for Technics KeyboardThis contact rubber version is run without any maintenance bumps. The contact rubber is held in a special frame.For the complete exchange of the contact strips in a keyboard with 61 keys 4 contact rubbers with 12 contacts and 1 contact rubber with 13 contacts are required.Contact high: 9.5 mmStrip bright: 26 mmStrip length: 164 / 179 mmNumber of contacts: 12 or 13A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

€ 12 .90*

Technics

Keys for Technics Keyboard

Parts Keyboard: Aftertouch 61

Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are usedImportant NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €2.38*

€ 44 .63*

Technics

Parts SK25 Keyboard for technics E-Pianos

Parts Keyboard: Keyguide

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

€ 4 .25*

Technics

Spare Parts Keyboard for Technics E-Piano, used

Parts Keyboard: Spring

Spare Parts for Technics E-Piano Keyboard, 88 Key hammeractionThis parts are usedTechnics Key-Guide:we know this problem with key guides in Technics E-Pianos. For this we have designed this alternative replacement key guide:Technics Key Guide

€ 0 .95*

Technics

Hammer for Technics SK25 Keyboard

Hammer: Hammer Zone 1 white key

Replacement Hammer for Technics SK25 KeyboardThis Keyboard is used in these ModellTechnics PC-25Technics PR-52Technics PR-53Technics PR-54Technics PR-554Technics PR-603Technics PR-604Technics PR-703Technics PR-804Technics PR-903Technics PX-552Technics PX-663The Technics SK25 keyboard is a 4 zone hammer mechanism.The manufacturer uses a total of 8 different hammers, since in addition to the 4 zones, a different hammer is used for the white and black keys.

€ 11 .78*

Technics Keyboards

Filter products

Technics Keyboards