Korg ix300
Panasonic
tactile switch 9,5 mm long life Korg
1 pcs. tactile switch suitable for models KorgLong life:This switch has a lifetime 10 times longer than the original switch Korg build inBX3, CX3Â Â Â Â Â Â Â Â Â Â Â Â Â new Version build 2002i30ix300Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
€
0
.65*
Jalco
YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg         partnumber: 454004300Roland      partnumber: 13449146Yamaha   partnumber: VB312600    YKB21-5012Yamaha   partnumber: VE742000    HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
€
2
.49*
Fatar
Contact rubber for Fatar Keyboards
Rubbercontact:
12 Contacts
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!!  Not for use in Roland Instruments   !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM
Variants from €5.00*
€
10
.95*
Jalco
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg         partnumber: 454004400Roland     partnumber: 13449125  HLJ0520-01-010Roland     partnumber: 13449145  YKB21-5010Yamaha   partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
€
2
.56*
Panasonic
tactile switch 9,5 mm Korg
1 pcs. tactile switch suitable for models KorgBX3, CX3Â Â Â Â Â Â Â Â Â Â Â Â Â new Version build 2002i30ix300Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
€
0
.63*
Synth-Parts
Korg Triton Slidepotentiometer - EWANA0C10B14, Volume
1 pcs. slide potentiometer with 30mm travel. Suitable Slider forVolume Control forKorg C150, C350, C3200, C6500Korg ix300, I5SKorg KarmaKorg M50 Master VolumeKorg Oasys 76, Oasys 88Korg Triton EX61, EX76, EX88Korg Triton LE61, LE76, LE88Korg Triton, Triton extremeKorg Triton Pro76, Triton ProXKorg TR76, TR88Korg X50Â This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part. Â Electrical properties:The stereo nominal resistance has 10Â KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
€
7
.74*
Fatar
Replacement keys and parts for Fatar TP/8S Keyboard
Key:
Key A
Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedWe would like to expressly point out that the keys are used. Fatar keys tend to darken and yellow significantly. Under certain circumstances, it may be that we currently only have very darkened keys in stock.Fatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.Â
€
9
.75*
Fatar
Replacement keys for Fatar TP/9 Keyboard, weighted
Key:
Key A
Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.Â
Variants from €5.70*
€
8
.90*