Nord Lead A1

Nord

Clavia Nord Knob

1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .45*

Fatar

Contact rubber for Fatar Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Nord

Clavia Nord Knob with line 6 mm

1 pcs. Clavia Nord Knob with line 6 mmPraktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .45*

Synth-Parts

1 pcs. tactile switch 13 mm Nord Black

1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 5 .99*

Nord

Clavia Nord Housing Screw 16 mm Black Phillips

1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.

€ 1 .69*

Nord

Clavia Nord Housing Screw 6 mm Black Phillips

1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

€ 1 .44*

Synth-Parts

PP Capacitor 4.7 nF Safety

1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters

€ 1 .99*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo for PCB

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phonejack is used by Nord often for Headphone output and also for Right / LEft Line out. (This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .25*

Nord

Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch PCB

1 pcs Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phone jack is used by Clavia Nord Instruments often for Sustain Pedal.(This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .75*

ALPS

Nord Encoder 12 mm for Nord Elektro

1 pcs. Encoder 12 mm suitable for different Nord models Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .84*

Synth-Parts

1 pcs. tactile switch 13 mm Nord light gray

€ 6 .45*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB

1 pcs. Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is often used on Clavia Nord instruments for the control pedal and rotor pedal. (This information is without guarantee - please have a look on pinlayout of the phone jack. The pin layout of phone jack is unique.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .45*

Nord

Nord LED lens, 6 arrows

Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 8 .16*

Nord

Nord LED lens surround 6

1 pcs Nord LED lens surround 6 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 7 .14*

Nord

Clavia Nord 3 way Power Supply IEC14 12p connector

1 pcs. Clavia Nord 3 way Power Supply IEC14 12P Connector brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 12-pole ribbon cableThis Power supply deliver:+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge.

€ 219 .00*

Nord

Nord LED lens single

1 pcs Nord LED lens single The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 2 .00*

Nord

Clavia Nord PSU Transformer 22770

1 pcs Clavia Nord PSU Transformer 22770 Electrical properties of 22770:Primary: 230 V AC or 2 x 115 V ACSec: 4 x 7,5 Volttransformer for PCB mountingPractical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

Synth-Parts

1 pcs. tactile switch 13 mm Nord Red

€ 6 .78*

Synth-Parts

Nord Rotary Poti vertikal, 12 mm, 10kOhm

1 pcs. Nord Rotary Potentiometer vertikal 12 mm 10kOhm Electrical properties:The nominal resistance has 10 kilo-Ohm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 12 x 11 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .95*

Nord

Nord LED lens 15 assembly, for rotary encoder

1 pcs Nord LED 15 lens assembly, for rotary encoder The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 5 .83*

Nord

Nord LED eight bezel, for arrow

1 pcs Nord LED eight bezel, for arrow The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 4 .94*

Nord

Nord LED lens shield 15

1 pcs Nord LED lens shield 15 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 7 .02*

Comprehensive Spare Parts and Repair Solutions for the Nord Lead A1

The Nord Lead A1 synthesizer is a highly regarded instrument among musicians and producers for its exceptional sound design capabilities and intuitive interface. To ensure its longevity and optimal performance, it is essential to have access to high-quality replacement components and repair services.

Essential Keyboard Spare Parts

For maintaining the functionality of your Nord Lead A1, we offer a wide range of keyboard spare parts. From replacement keys to keybed parts, these components are designed to meet the exact specifications of your instrument.

Specialized Synthesizer Spare Parts

Our inventory includes various synthesizer spare parts, such as sensor boards, contact rubbers, and potentiometers. These parts are essential for ensuring the accurate and responsive performance of your synthesizer.

Advanced Repair Components

For more intricate repairs, we provide encoders, tactile switches, and felt materials. These components are crucial for addressing issues with the instrument's control and tactile feedback systems.

Display and Circuitry Repairs

We also supply OLED display replacements and support PCB repair services to restore the visual and electronic functionality of your Nord Lead A1. Our parts are compatible with both OEM spare parts and EOL spare parts, ensuring comprehensive coverage for all repair needs.

Professional Repair Services

In addition to providing spare parts, we offer a professional repair service to assist with the maintenance and restoration of your Nord Lead A1. Our experts are equipped to handle a wide range of issues, ensuring your instrument remains in peak condition.

With our extensive selection of spare parts and repair solutions, you can trust us to support the performance and longevity of your Nord Lead A1 synthesizer.

Filter products

Nord Lead A1

Comprehensive Spare Parts and Repair Solutions for the Nord Lead A1

Essential Keyboard Spare Parts

Specialized Synthesizer Spare Parts

Advanced Repair Components

Display and Circuitry Repairs

Professional Repair Services