Korg S/SG -Serie

Panasonic

tactile switch 9,5 mm long life Korg

1 pcs. tactile switch suitable for models KorgLong life:This switch has a lifetime 10 times longer than the original switch Korg build inBX3, CX3 new Version build 2002i30ix300 Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Synth-Parts

Korg tactile switch 6.2 SMD 3.1 mm ground

1 pcs. SMD tactile switch with higth 3.1 mm ground Attention: SMD (Surface Mounted Device) needs spezial soldering equipment and spezial experience in solderingThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .84*

Jalco

YKB21-5078 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5078HLJ-2305HTJ-064-16DThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .34*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Panasonic

tactile switch 5 mm Korg

1 pcs. tactile switch suitable for models Korgis40, is50Pa1 XPro, Pa2 XProPa50 without LCD BoardPa60, Pa80, Pa500, Pa800SP200Korg Part Number: INT0001008The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

E-Switch

Single pole push switch, 250V/5A with solder lugs SDDLD10900

Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

KORG

Korg RH3 Keyboard Spring

1 pcs Korg RH3 Keyboard Spring

€ 4 .17*

Panasonic

tactile switch 9,5 mm Korg

1 pcs. tactile switch suitable for models KorgBX3, CX3 new Version build 2002i30ix300 Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .63*

KORG

Replacement keys for RH3 Keyboard, ivory

Taste: Key A

Replacement Keys for RH3 KeyboardRH3 keyboard is used inKorg Kronos 73Korg Kronos 88KorgSP-250Korg SV-1 Color: cream white (Ivory)The RealHammer 3 keyboard (RH3) is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

Variants from €7.90*

€ 9 .89*

KORG

Contact rubber 12P for RH3 Keyboard

1 piece Contact rubber 12 points for RH3 KeyboardContact high: 7,5 mmStrip bright: 22,3 mmStrip length: 165 mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 88 keys 7 contact strip + 4 pins are needed. The remaining 4 contacts can be easily separated from a rubber contact strip with 12 contacts. A notch is provided in the rubber contact strip after every four contacts for this purpose.

€ 10 .79*

ALPS

Korg SP100, SP200, SP300 Volume Slide Potentiometer

1 pcs. Korg SP100 Volume Slide PotentiometerKorg SP100Korg SP200Korg SP250Korg SP300OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

KORG

Korg RH3 keyboard felt hammerlimit upper

1 Pc. Korg Upper Hammer Stop Felt for Electric Piano KeyboardsThis felt is used by Korg in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 1 times.

€ 29 .68*

KORG

Hammer for RH3 Keyboard hammer black zone 1

Hammer: Hammer Zone 1 black key

Replacement Hammer for RH3 KeyboardThe RealHammer 3 (RH3) keyboard is a 4 zone hammer mechanism.

€ 8 .95*

Yamaha

Parts for Yamaha AE Keyboard

Taste: Contactrubber 76P

Replacement Keys and spare parts for Yamaha AE KeyboardThis part fits for all Yamaha AE Keyboards.Yamaha AE keyboard is used inKorg C-15, C-25, C-30, C-40, C-400, C4000, C-50, C-5500,C6000, C6000MKorg SG-ProXYamaha CLP-122, CLP-550, CLP560Yamaha CVP-20, CVP-50, CVP-55, CVP65, CVP85, CVP87Yamaha AE Keyboard is a very old and one of the first Hammer Action Keyboards. A note on the contact rubbers: The contact rubber for the 88'er keyboard is available in the colors pink and green. The contact rubber in pink is missing 2 holes in the rubber that serve as a mechanical guide.Contactrubber in green is out of production.The interruptions in the contact rubber are not symmetrical.

Variants from €3.56*

€ 34 .51*

Synth-Parts

Korg 45W Switching Powersupply internal

1 pcs 45W internal Switching Power Supply Unit suitable forKorg SV1Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 45 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

KORG

Korg RH3 Keyboard felt keylimit lower

1 Pc. Korg RH3 Bottom Keystroke Felt for Electric Piano KeyboardsThis felt is used by Korg in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times.

€ 9 .50*

KORG

Fader knob for KORG SP250 - discontinued

1 pcs. Fader knob suitable for:KORG SP250No longer suitable from Korg

€ 7 .29*

KORG

DIN female 5 pin MIDI for printed circuits

MIDI DIN socket female 5 pin for printed circuitused in: Korg SP250 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .78*

Synth-Parts

Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg Instruments Technical description :The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 3 .78*

Synth-Parts

Powersupply external 12V for Korg SP-250

1 pcs external Class A Power Supply Unit equivalent to Korg SP-250 brand manufacturers low residual ripple Electrical properties:Secondary voltage: 12VDCCurrent: 2ACE / GS testedPractical advice:Plug of the device. Don't work under Voltage.Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 5.5 mm outside diameter.

€ 28 .56*

Synth-Parts

Cage Nut M6 for Rack Mounting

1 pcs Cage Nut M6 for Rack Mounting

€ 0 .49*

Synth-Parts

Screw M6 x 18 mm black PH for Rack Mounting

1 pcs Screw M6 x 18 mm black PH for Rack Mounting

€ 0 .88*

Synth-Parts

Screw M6 x 20 mm PZ for Rack Mounting

1 pcs Screw M6 x 20 mm PZ for Rack Mounting

€ 0 .44*

Filter products

Korg S/SG -Serie