Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Nord Lead 2X

Contact rubber for Fatar Keyboards
Fatar
Contact rubber for Fatar Keyboards
Rubbercontact: 12 Contacts
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!!   Not for use in Roland Instruments    !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*
€ 10 .95*
Clavia Nord Volume Dreh Potentiometer
Nord
Clavia Nord Volume Dreh Potentiometer
1 pcs. Clavia Nord Volume Dreh Potentiometer Electrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 16 mm Diameter, the total length without pins is 32 mm. In this total length the casing is 9 mm long. On this casing is the thread with 7 mm length connected and out of the thread the axis rises with 15 mm length. The axis has a diameter of 4 mm and is flattened on a length of 12 mm. It is made of metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

€ 15 .90*
1 pcs. tactile switch 13 mm Nord Black
Synth-Parts
1 pcs. tactile switch 13 mm Nord Black
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 5 .99*
Clavia Nord Housing Screw 6 mm Black Phillips
Nord
Clavia Nord Housing Screw 6 mm Black Phillips
1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

€ 1 .44*
1 pcs. tactile switch 13 mm Nord light gray
Synth-Parts
1 pcs. tactile switch 13 mm Nord light gray
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 6 .45*
Clavia Nord Knob with line 4 mm
Nord
Clavia Nord Knob with line 4 mm
1 pcs. Clavia Nord Knob with line  4 mmThis control knob fits on a 4 mm D-axis. Nord used these knobs on older models. Especially for the volume potentiometer.Praktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .75*
1 pcs. tactile switch 13 mm Nord Red
Synth-Parts
1 pcs. tactile switch 13 mm Nord Red
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 6 .78*
Clavia Nord Pitch Stick short cable
Nord
Clavia Nord Pitch Stick short cable
1 pcs. Clavia Nord Pitch Stick short cable 

€ 108 .99*

Comprehensive Spare Parts for the Nord Lead 2X

The Nord Lead 2X synthesizer is a remarkable instrument known for its robust sound design capabilities and reliability. However, over time, certain components may require maintenance or replacement to ensure optimal performance. Our range of keyboard spare parts and synthesizer spare parts caters specifically to the needs of Nord Lead 2X users.

Essential Replacement Keys and Keybed Parts

Maintaining the tactile feel and functionality of your Nord Lead 2X is crucial. We offer high-quality replacement keys and keybed parts to restore the playability of your instrument. Whether you need a single key or a complete keybed assembly, our products are designed to meet OEM standards.

Contact Rubbers and Sensor Boards

Ensuring accurate note triggering is vital for any keyboard. Our selection includes contact rubber strips and sensor boards, essential for the precise operation of your Nord Lead 2X. These components are engineered for durability and reliability.

Potentiometers, Encoders, and Tactile Switches

For seamless control over your synthesizer's parameters, we provide potentiometers, encoders, and tactile switches. These parts are essential for maintaining the smooth operation of your instrument's interface.

Felt and OLED Display Replacements

To preserve the internal and external integrity of your Nord Lead 2X, we offer felt for cushioning and noise reduction, as well as OLED display replacements for a clear and vibrant visual interface.

PCB Repair and EOL Spare Parts

For advanced maintenance, our services include PCB repair to address electronic issues. Additionally, we stock EOL spare parts to support discontinued components, ensuring the longevity of your instrument.

Professional Repair Services

For users seeking expert assistance, our professional repair service is available to handle complex repairs and part replacements. Trust our experienced technicians to restore your Nord Lead 2X to its original condition.

Explore our extensive range of OEM spare parts and accessories tailored for the Nord Lead 2X. Ensure your synthesizer continues to deliver exceptional performance with our reliable solutions.