Technics KN6000

E-Switch

Single pole push switch, 250V/5A with solder lugs SDDLD10900

Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Technics

Keys for Technics Keyboard Ivory

Taste: Key A

1 pcs. Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are used and in a good condition.Important NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €4.89*

€ 12 .95*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

Nichicon

Gold-Cap 1F/5.5 V

1 piece Gold-Cap 1 F/5,5 V Manufakturer: Elna or Panasonic

€ 4 .34*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Taiwan Alpha Electronic Co., LTD.

Encoder 16 mm for Technics KN6000

Encoder 16 mm widht suitable forTechnics KN6000 Practical advice:The thread of this encoder is 2 mm longer than the thread of the ALPS encoders These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 5 .63*

Technics

Dial Knob Technics KN6000

1 pcs Dial Knob suitable forTechnics KN6000

€ 9 .89*

Synth-Parts

D/A-Converter PCM1728E SSOP28

1 pcs. PCM1728E SSOP28Digital-Analog-Converter for audio application forResolution: 24bitInterface: seriellNumber of DAC outputs: 2Number of channels: 1Case: SOOP28Mechanical Description:The digital to analog converter is housed in a SOOP258 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 0.63 mm x 3.8 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.

€ 20 .23*

JST

JST FJ Plug 5 pin for printed circuits

JST FJ Plug 5 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Plug 10 pin for printed circuits 10PL-FJ

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 10 pin for printed circuits 10R-FJ

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 5 pin for printed circuits

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

Technics

Mainboard QJBG2320 for Technics KN6000, tested with 1 year warranty

1 pcs. Mainboard QJBG2320 for Technics KeyboardTechnics KN6000These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

€ 288 .99*

Technics

Pitch Bend Assembly for Technics Keyboards

PitchBend: Kabel 4P

Pitch bend Assembly suitable forTechnics KeyboardsWe offer here all replacement parts you will need to repair your Technics Pitch Bend Assembly. Our parts are used and in a good condition.

Variants from €0.68*

€ 17 .85*

Synth-Parts

NEC D71051GU-10 UART SSOP28

1 pcs. NEC D71051GU-10 UART SSOP28

€ 17 .85*

Technics

Contact rubber Version 1 for Technics Keyboard

Kontaktgummi: 12 Contacts

Contact rubber Version 1 for Technics KeyboardThis contact rubber version is run without any maintenance bumps. The contact rubber is held in a special frame.For the complete exchange of the contact strips in a keyboard with 61 keys 4 contact rubbers with 12 contacts and 1 contact rubber with 13 contacts are required.Contact high: 9.5 mmStrip bright: 26 mmStrip length: 164 / 179 mmNumber of contacts: 12 or 13A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

€ 12 .90*

Technics

Keys for Technics Keyboard

Ersatzteile Tastatur: Aftertouch 61

Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are usedImportant NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €2.38*

€ 44 .63*

Synth-Parts

Floppy2USB Technics KN6000 Floppy Emulator

1 pcs. Floppy2USB Emulator suitable for Technics KN6000 We deliver this Floppy2USB drive with a suitable adapter cable. The installation is easy to accomplish.Much more complex is the transfer of the floppy disks to the USB stick. This requires an old PC that still has a floppy drive and a USB post. Here there is a software that supports copying.

€ 125 .00*

Technics

LCD Display for Technics KN6000

1 pcs. LCD Display forTechnics KN6000Technics KN6000This Display is used.

€ 198 .99*

Filter products

Technics KN6000