Kawai ES8

Panasonic

tactile switch 5 mm for Kawai

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Kawai

Kawai RH88B PWB Assy KKB-044(2)

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040.The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CS4Kawai CN24Kawai CN25Kawai CN27Kawai CN29Kawai CN34Kawai CN35Kawai CN37Kawai CN39Kawai ES7Kawai ES8Kawai ES920Kawai MP7Kawai MP7SEClavia Nord Grand

€ 164 .99*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

1 pcs. Kawai Holder Score Stand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

€ 9 .59*

Kawai

Kawai DC Power Jack 3.5 mm with solder pins

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES4Kawai ES6Kawai ES7Kawai ES8Kawai ES520This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 7 mmInner diameter: 3.5 mmInnercontact: 1.5 mmMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 18 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 9 .22*

Kawai

Kawai Hammer upper limit Felt for E-Piano Keyboards, RH88

1 pcs. Kawai upper limit Hammer Felt for E-Piano Keyboards HAMMER UPPER-LIMIT CUSHIONThis felt is used by Kawai in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. In the Drawing it the felt with the number 36 For better mounting this felt is equipped with an adhesive tape.Material name: KBFZ-0125 Attention: For quite old keyboards, the felt has a different height!!!The old felts have a height of 12 mm while the current felt has a height of 10.5 mm.

€ 30 .46*

Kawai

Kawai RH88 felt HAMMER LOWER-LIMIT CUSHION

1 pcs. Kawai lower hammer Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the hammers when they are returning to zero position. In the drawing it is the felt with the number 37This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.

€ 30 .46*

Kawai

Kawai Power Button for Stage Serie

1 pcs. Kawai Power Button RoundKawai ES-6Kawai ES-7Kawai ES-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of diameter 11 mm. This part has one Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .36*

Kawai

Kawai RH88 felt KEY LOWER LIMIT CUSHION

1 pcs. Kawai Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.

€ 14 .72*

Kawai

KAWAI RH88D weighted Replacement keys for Keyboard

Keys: Key C

Replacement keys for KAWAI Keyboard RH-88Dsuitable forKawai CN35Kawai CN39Kawai ES8Kawai MP7SEThe Kawai RH88D keyboard is a velocity sensitive keyboard with 4-zone hammer action.This keys are weigted.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RH88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88

€ 16 .89*

Synth-Parts

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

€ 1 .99*

Kawai

Kawai RH88 felt KEY STOPPER CUSHION

1 pcs. Kawai Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are returning to zero position. In the drawing it is the two felts with the number 34This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.

€ 30 .46*

ALPS

Volume Slider 30mm Travel

Stereo Slider with 30mm Travel. Suitable for Volume Slider forKawai ES6The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 10 .64*

Kawai

Kawai PS-154A Power Supply Unit

1 pcs external Power Supply Unit Kawai PS-154AMechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 15V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

Kawai

Kawai Volume Slider Knob for ES Stage Serie

1 pcs. Kawai Volume Slider KnobKawai ES-7Kawai ES-8 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

€ 8 .69*

Kawai ES8 spare parts easy to buy online

The Kawai ES8 stage piano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Kawai is used a lot then the individual components of the Kawai ES8 electric piano are subject to wear. Anyone who likes to play a lot on his Kawai ES8 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Kawai ES8 digital piano may need to be replaced by a new component. During frequent disassembly and assembly of the stage piano on stage, the phone jack, the power supply or the power cord are stressed hard. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control is defective. With us you can easily buy a new potentiometer for your Kawai ES8 Stage Piano.

We supply spare parts for Kawai ES8 electric piano worldwide.

We are your reliable supplier for spare parts of your Kawai ES8 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potetniometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Kawai spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Kawai ES8 electric piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Kawai buys the components. Our original Kawai spare parts like sliptape, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Kawai ES8 Stage Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.

Filter products

Kawai ES8

Kawai ES8 spare parts easy to buy online

We supply spare parts for Kawai ES8 electric piano worldwide.