1 pcs. Yamaha Headphone HPE170 EAR PAD ASSYThe Yamaha HPE-170 headphones were launched in 1993. We offer here one new ear cup, suitable for the Yamaha headphones HPE170. The ear pad is a original Yamaha spare part.Â
1 pcs. Nord Pedal SpringOn this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Â
1 pcs E-mu Silent Fan Replacement 3HE RackWe offer here an Austasuch Silent fan for all E-mu rack instruments with 3 height units device size.Prepared ready to plug in. No soldering is required.Scope of delivery:   Fan with only 12dbA   Mounting material   Installation instructionsWith many of the E-Mu rack devices, the noise generated by the fan on the power supply unit is a major problem. The fan noise can be very annoying, especially in quiet studio environments.One noise will always remain. Whenever something moves, a noise is produced. So there is no such thing as a truly noise-free fan. But we offer the most powerful fan on the market. With the same technical data as the original fan. Â
Pedal Assembly for Yamaha E-Pianos XR780On this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Depending on the model, this pedal was supplied with a potentiometer or contact rubber in the damper pedal. Please be sure to check the pedal before ordering a replacement part.Â
Pedal Assembly for Yamaha E-Pianos  WV9125 Practice tip:Apparently, this socket has always contact with the ground. In the case of the spare part supplied by Yamaha Yamaha then sees this vertical socket replaced by an angled socket.
1 pcs. PLUNGER COIL ASSY(A) MX100ASemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. PLUNGER COIL ASSY(B) MX100ASemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. COIL ASS'Y (A) L=60 BL SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. COIL ASS'Y (AL) L=75 BL SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. COIL ASS'Y (BL) L=50 WH SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. COIL ASS'Y (B) L=35 WH SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
Pitch bend Assembly PB-H0204 for Roland Fantom series Synthesizer / Music Production WorkstationThis pitch bend unit is complete and ready to plug in wired for easy exchanging this unit. The unit fits every Roland Fantom Synthesizer. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all.Roland part number: PB-H0204Â
1 pcs. Power Switch Assembly 100 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 100 cm
Power Switch Assembly 60 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 60 cm
Pitch bend Assembly suitable forTechnics KeyboardsWe offer here all replacement parts you will need to repair your Technics Pitch Bend Assembly. Our parts are used and in a good condition.
Parts for Pedal Assembly Technics E-PianosComments on the article:That's why the pedal is only available as an article pedal center.We deliver the spring that we currently have in stock.The spare parts are usually used. Please see specification for exact item.
Parts for Pedal Assembly Technics E-PianosComments on the article:That's why the pedal is only available as an article pedal center.We deliver the spring that we currently have in stock.The spare parts are usually used. Please see specification for exact item.
Pedal Assembly Version 2 for Yamaha E-Pianos XR780The differrenz is to see in Pedal PCB. This PCB is without ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Â
1 piece Yamaha Pedal PCB X0193 for E-Pianos V7675600This PCB for Yamaha pedal unit is used in pedals in which three potentiometers are installed.For final use, parts on the board still have to be broken off. The break edges are marked and perforated accordingly. This can be done easily and without tools.Â
1 pcs. Yamaha Coil assy long cable MX100IIXGThis coil is used in various Yamaha Disklaviers and also Disk Grand Pianos. In the original assembly from the factory, coils with different colour markings and also with different cable lengths are used. Only the coil shown here is available as a spare part.Security Advice: Please be aware thath these coils are using 110V DC or 120V DC.Â