1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.
1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.
1 pcs. Nord Pedal SpringOn this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Â
1 pcs. Yamaha Pedal screwDimensions: M6 x 57 mm Note:At 25 mm, this pedal support bolt has a shorter thread than the one under item numberSCYA-ZY898700
1 pcs. Technics Tapping Screw XTW3+8C KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 3 x 10mm Screw XTW3+8C in Service Manual.
1 pcs. Technics Tapping Screw XTW3+10T Keyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.
To avoid misunderstandings, we use the screw designations from the manual.
Dimensions: 3 x 12,5mm ScreLocation: PCB in KeyboardXTW3+10T in Service Manual.
1 pcs. Technics Tapping Screw XTN4+50AFZ Keyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 4 x 50 mmScrew XTN4+50AFZ in Service Manual.
1 pcs. Technics Tapping Screw XTB35+16A KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 3,5 x 16 mmScrew XTB35+16A in Service Manual.
1 pcs. Technics Screw XYN4+F16 KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: M4 x 16 mmScrew XYN4+F16 in the Service Manual.
1 pcs. Technics Screw XYN4+F25 Keyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: M4 x 27 mmScrew XYN4+F25 in the Service Manual.
1 pcs. Technics Screw XYN4+F20 - Transformer
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: M4 x 20 mmScrew XYN4+F20 in the Service Manual.
1 pcs. Technics Screw XXT4+30AF KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: 4 x 30 mmScrew XXT4+30AF in the Service Manual.
1 pcs. Technics Screw XYN4+F30S KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: M4 x 30 mmScrew XYN4+F30S in the Service Manual.
 1 pcs. Technics Screw XYN6+F40 KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.M6 x 44 mmLocation: PianostandScrew XYN6+F40 in Service Manual. Â
 1 pcs. Technics Screw QHDG016 KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual. M6 x 34 mmLocation: Piano HousingScrew QHDG016AA in Service Manual. Â
1 pcs. Technics Screw QHDG021 Keyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.M5 x 25 mmLocation:With this Srew Keyboard in Technics E-Pianos is fixed.Screw QHDG021 in Service Manual.
1 pcs. Technics Tapping Screw XTW3+12TKeyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.
To avoid misunderstandings, we use the screw designations from the manual.
Dimensions: 3 x 14,5mm ScrewLocation: Keyboard housingXTW3+12T in Service Manual.
1 pcs. Technics Tapping Screw XTV3+10C Keyboardscrew
These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.
To avoid misunderstandings, we use the screw designations from the manual.
Dimensions: 3 x 10 mm ScrewLocation: Power switch assemblyXTV3+10C in Service Manual.