Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Yamaha DX7

tactile switch 7,3 mm
ALPS
tactile switch 7,3 mm
1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .93*
Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
Synth-Parts
Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125  Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 2 .44*
CR2032 Solder pin for Yamaha DX-Series
Varta
CR2032 Solder pin for Yamaha DX-Series
1 pcs. CR2032 with 2 solder pin suitable forYamaha DX7, DX7 II, DX9, DX27, DX100Yamaha TG77Yamaha RX5, RX7, RX11Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The distance between the solder legs is 15 mm.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .49*
1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
E-Switch
1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*
PP Capacitor 22 nF Safety
Synth-Parts
PP Capacitor 22 nF Safety
 1 pcs. PP Capacitor 22 nF Safety

€ 1 .99*
Recapping Set PSU for Yamaha DX7,DX9
Synth-Parts
Recapping Set PSU for Yamaha DX7,DX9
Recapping set Power Supply for Yamaha DX7,DX9The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90330 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 19 .40*
Yamaha DX-Serie Volume Slide potentiometer - EWA-NFOC
Synth-Parts
Yamaha DX-Serie Volume Slide potentiometer - EWA-NFOC
1 pcs. Volume Slide potentiometer with 30mm travel. Suitable for Yamaha DX7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100 This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From
€ 7 .74*
Bipolar Capacitor 4.7uF/25V for Audio, Radial, Nichicon Muse ES
Nichicon
Bipolar Capacitor 4.7uF/25V for Audio, Radial, Nichicon Muse ES
1 piece bipolar Elko 4.7uF/25V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

€ 0 .86*
Yamaha DX7 Recapping Set Mainboard
Synth-Parts
Yamaha DX7 Recapping Set Mainboard
Recapping set Mainboard for Yamaha DX7The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90370 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 16 .54*
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometer
Synth-Parts
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometer
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometerSlider Set suitable for modelsYamaha DX 7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100Set contains:1 pcs. Slider for Volume1 pcs. Slider for Data EntryUseful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 11 .90*
Replacement keys and parts for FS Keyboard
Yamaha
Replacement keys and parts for FS Keyboard
Key: Aftertouch 76
1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

Variants from €0.67*
€ 88 .99*
Yamaha DX7 OLED Display NEW blue LCD Replacement
Synth-Parts
Yamaha DX7 OLED Display NEW blue LCD Replacement
Color: Blue
1 pcs. OLED Display blue New forYamaha DX7Yamaha DX9This Display replacement is a really easy swapping. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 54 .70*
Yamaha DX-Serie Slidepotentiometer Data Entry - EWANA0C10B14
Synth-Parts
Yamaha DX-Serie Slidepotentiometer Data Entry - EWANA0C10B14
1 pcs. slide potentiometer with 30mm travel. Suitable Slider forData Entry für  Yamaha DX7 Yamaha DX9 Yamaha DX11Yamaha DX27 Yamaha DX100 This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.  Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

From
€ 7 .74*
Cable straight thru 12,7 x 11,7 mm
Synth-Parts
Cable straight thru 12,7 x 11,7 mm
1 pcs. Cable straight thru 12,7 x 11,7 mmThis Cable straight thru is used by 2 pol power cords.Dimensions of mounting hole: 12,7 x 11,7 mm

€ 0 .68*
5 pcs. Contact Cleaning Stripes for electrical contacts
Synth-Parts
5 pcs. Contact Cleaning Stripes for electrical contacts
5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

€ 11 .90*
Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with 2 switch
Hosiden
Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with 2 switch
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo with two switch, for printed circuitThis part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Yamaha DX7Technics SX -PX20Technical descriptionThe offered phone jack for PCB mounting is a stereo jack two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 3 .99*
Quartz 9,6 MHz
Synth-Parts
Quartz 9,6 MHz
1 pcs. Quartz 9,6 MHzsuitable forYamaha DX7   Master Clock OSCYamaha DX9   Master Clock OSC

€ 0 .83*
DIN female 5 pin MIDI for printed circuits, Jalco, YKF51-5066
Jalco
DIN female 5 pin MIDI for printed circuits, Jalco, YKF51-5066
1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5066used by:KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 13 .09*
Power cable 1.5 m Europlug open
Synth-Parts
Power cable 1.5 m Europlug open
1 pcs. Power cabel 1.5m with 2P Europlug and solderlugsPower Cord with on side open adn one side Euro PlugOriginal cable fragile or already damaged?For instruments that are 30 years and older, it makes sense to check the power cord. Has the plastic become brittle over the years or is there damage at the kinks of the cable? 

€ 4 .95*
Yamaha DX7 Complete Set 42 tact switches
ALPS
Yamaha DX7 Complete Set 42 tact switches
Complete Set 42 Taster  suitable for Yamaha  Yamaha DX7Part Number:  KA905510We offer here brand new OEM replacement parts.The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.Why should I solder new pushbutton

€ 37 .49*
Yamaha DX7 LCD Display new
Synth-Parts
Yamaha DX7 LCD Display new
Color: Blue
1 pcs. LCD Display brandnew forYamaha DX7this is  a plug in ready Display replacement for Yamaha DX7. You will only need a screwdriver for this replacement.These different Display versions are available:BlueOrangeWhiteFor this replacement you will only need a screwdriver. We deliver this LCD Display plug in ready.Attention on the Orange Display: Here, a height difference of 3 mm must be bridged or compensated.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 48 .99*

Exploring the Yamaha DX7: Maintenance and Spare Parts

The Yamaha DX7 is a legendary synthesizer that has left an indelible mark on the music industry. Renowned for its unique FM synthesis capabilities, the DX7 remains a sought-after instrument among musicians and enthusiasts. However, as with any vintage equipment, maintaining and repairing a DX7 can present challenges. Fortunately, a wide range of keyboard spare parts and synthesizer spare parts are available to ensure this iconic instrument continues to perform optimally.

Essential Replacement Components

One of the most common maintenance needs for the Yamaha DX7 involves its keybed. Over time, wear and tear can affect the keys' responsiveness. Replacing worn-out keys with replacement keys or addressing issues with the keybed using keybed parts can restore the instrument's playability. Additionally, the contact rubber beneath the keys may require replacement to ensure consistent key triggering.

Electronic Component Upgrades

Upgrading or repairing electronic components can significantly enhance the functionality of a DX7. For instance, replacing the original LCD screen with an LCD display replacement or opting for an OLED display upgrade can improve visibility and usability. Other critical components, such as the potentiometer and tactile switch, may also need attention to maintain the instrument's control interface.

PCB and Specialized Repairs

For more complex issues, addressing the synthesizer's printed circuit board (PCB) is often necessary. PCB repair services can resolve issues related to circuit damage or malfunctioning components. Sourcing OEM spare parts or EOL spare parts ensures compatibility and longevity for these repairs.

Professional Repair Services

While some maintenance tasks can be undertaken by the user, others may require the expertise of a professional repair service. Professionals have the experience and tools necessary to diagnose and resolve intricate issues, ensuring the DX7 continues to deliver its iconic sound.

In conclusion, the Yamaha DX7 remains a cherished instrument, and with the availability of quality spare parts and repair services, it can continue to inspire musicians for years to come.