Roland MV Series
ALPS
tactile switch 5 mm for Roland
tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
€
0
.65*
Jalco
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
€
2
.56*
Synth-Parts
Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
€
2
.44*
Synth-Parts
DC Power Jack for Roland Instruments
1 pcs. HEC470-01-630 DC Power Jack with solder Pins for PCB mounting We offer the original Hosiden power socket here. Mechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 3 A at 16 VDC. Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.
€
4
.25*
Jalco
Roland triple female MIDI Socket for PCB, Jalco, YKF51-5046
1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in newer Roland instruments.used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
€
10
.89*
Synth-Parts
Roland MV-30 new LCD Display white plug and play
1 pcs. White LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: Black Character / White BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.
€
104
.90*
Synth-Parts
Roland MV-30 new LCD Display black plug and play
1 pcs. Black LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Black BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.
€
104
.90*
Synth-Parts
Roland MV-30 new LCD Display blue plug and play
1 pcs. blue LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Blue BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.
€
104
.90*