Bundels

Synth-Parts

Recapping Set PSU for Yamaha DX7,DX9

Recapping set Power Supply for Yamaha DX7,DX9The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90330 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 19 .40*

Synth-Parts

Yamaha DX7 Recapping Set Mainboard

Recapping set Mainboard for Yamaha DX7The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90370 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 16 .54*

Synth-Parts

Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometer

Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometerSlider Set suitable for modelsYamaha DX 7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100Set contains:1 pcs. Slider for Volume1 pcs. Slider for Data EntryUseful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 11 .90*

Synth-Parts

MPC-2000XL full Set tactile switch Akai

Complete Set tactile switch suitable for AKAI MPC-2000AKAI MPC-2000XL AKAI Part No: ES-411687NES-415015J Quantity: 46 pcsThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

€ 24 .50*

Synth-Parts

Replacement Set tactile Switch for Yamaha RS7000 complete

Complet replacement set tactile switch for Yamaha RS7000consist of:5 pcs 9,5 mm hight46 pcs 7 mm hight27 pcs Keypad switchOperational Life for all switch: 1.000.000 CyclesThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 29 .75*

Synth-Parts

Korg M1 recapping set complete unit

Korg M1 recapping set complete unit The Capacitors are firmly soldered to a circuit board. For replacing the capacitors craftsmanship and experience in soldering is required.

€ 43 .49*

Synth-Parts

Korg 01/W Recapping Set

Recapping set Korg 01/WKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg 01/W series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Korg 01/W.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 29 .49*

Synth-Parts

Roland Juno 106 Recapping Set complete

Recapping set for Roland Juno 106The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Roland Juno series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe set consists of 88 electrolytical CapacitorsThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 64 .00*

Synth-Parts

MPC-1000 full Set tactile switch Akai

Complete Set tactile switch suitable forAKAI MPC-1000Part Number: : AKAI: ES-415015J and ES-349474 Delivery Quantity: 35The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

€ 18 .99*

Synth-Parts

Roland XV-5080 Mainboard Recapping Set

Recapping set for Roland XV-5080 Mainboard The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.From our repair experience we know that the SMD electrolytic capacitors used in the Roland XV-5080 are now defective due to age.On the mainboard of the XV-5080 also some classic cup electrolytic capacitors have been used. These electrolytic capacitors are usually inconspicuous and intact. Manufacturer: NichiconThe set consists of 23 SMD electrolytical Capacitors.The board also uses 2 bipolar, i.e. non-polarized capacitors.This Recapping Set contains all SMD Capacitors for Mainboard recapping in Roland XV-5080.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 24 .89*

Synth-Parts

Sequential Circuits Propeht 5 complete Set Potentiometer

Slider set brand new Sequential Circuits, SCI Potentiometer forSequential Circuits Prophet 5 REV1 Serial 1 - 182Sequential Circuits Prophet 5 REV3 Serial from 1301 to endThe potentiometers that were installed in the Prophet 5 and also in the Prophet 10 have a significant disadvantage. This disadvantage is that the axis used was made of Plastic. This plastic axle breaks off easily and it is no longer possible today to get the original spare parts. A potentiometer with metal axis.Appearance (technical characterisation):We offer here a brand new potentiometer as a replacement for the potentiometer used in Sequential Circuits synthesizers.Resistance: 10 KOhmQuantity: 26 pcs.Changes to the original Pot:+ Metal axle instead of plastic axle.o 8mm thread Original potentiometer has inch thread with 9.5mm- Soldering pins are 2 mm wide. The original is 1.5 mm. The holes in the board are 2,08 mm wide. Maybe holes have to be drilled with a bit.Usefull hint:Delivery includes Nut and Washer.Since this is a two-sided board, please note, when soldering the new potentiometer must be soldered on both sides.The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 199 .00*

Synth-Parts

Korg Wavestation Recapping Set

Recapping Set for Korg Wavestation KeyboardThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg Wavestation series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, from well knonw Manufacturere like Nichicon, Panasonic, Vishay or Würth.This Recapping Set contains all necessary Capacitors for Korg Wavestation.In Korg Wavestation was already used a Switching Power Supply Unit:Warnung: Schaltnetzteile speichern hohe Energien über lange Zeiträume. Hier arbeiten Sie an einer Baugruppen die mit 230 V AC und ca. 300 V DC arbeiten.Sie führen diese Arbeit auf eigens Risiko und in voller Eigenverantwortung durch.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 38 .50*

Synth-Parts

Roland Juno 60 Fader Set 30mm

Roland Roland Juno 60 Fader Set complete This Set contains:1 pcs. Fader 30mm 10KB1 pcs. Fader 30mm 50KA1 pcs. Fader 30mm 1MA16 pcs. Fader 30mm 50KB Useful hint to Roland Juno 60 Fader Set:The lever on the original potentiometer is straight. The lever on the potentiometer offered here adapts to this shape because it is slotted.Arrangement of the solder pins: The solder pins on this replacement part are slightly offset. The solder pins must be bent slightly before soldering.The control is soldered firmly onto a circuit board. Replacing the control requires manual dexterity and experience in soldering.

€ 173 .99*

Synth-Parts

Yamaha RS7000 complete Set Potentiometer, Encoder

Complet replacement set potentiometer, Encoder for Yamaha RS7000consist of:17 pcs rotary poti, vertikal 11mm, 10kOhm 5 pcs rotary poti, vertikal, 12mm, Center click + TAP 4 pcs Encoder, 16mm 2 pcs Stereo Volume rotary pot, 14mmOperational Life for all pot's: 15.000 CyclesOperational Life for all Encoder: 50.000 CyclesThe pot's are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 94 .95*

Synth-Parts

Replacement Set tactile Switch for Yamaha RM1x complete

Complet replacement set tactile switch for Yamaha RM1xconsist of:45 pcs 9,5 mm hight27 pcs Keypad switchOperational Life for all switch: 1.000.000 CyclesThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 39 .00*

ALPS

Yamaha DX7II Complete Set 46 replacement switch

Complete Set tactile switch suitable for modelsYamaha DX7 IIYamaha DX7 IIFDYamaha Part No: KA907030The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 22 .66*

Synth-Parts

MPC-2500 full Set tactile switch Akai

Complete Set tactile switch suitable for AKAI MPC-2500Part Number: : ES-415015J and ES-349474The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

€ 27 .49*

Synth-Parts

Recapping Set PSU for Korg T1,T2,T3

Recapping set Switching Power Supply for Korg T1The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage. Warning: Switching power supplies store high amounts of energy for long periods of time. You are working on assemblies that operate at 230 V AC and approx. 300 V DC.You are carrying out this work at your own risk and under your own responsibility.With an age of more than 30 years, the Korg T series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Korg T1.Warning PSU Recapping:Risk of electric shock: Switching power supplys store high voltage and high energy for a very long period of time.When working with these spare parts offered here, you are working directly in a 230VAC circuit.Observe polarity. Incorrect installation will cause explosion and fire.For experts only: Be aware of dangers of electric current

€ 19 .90*

Synth-Parts

Roland MKS-50 Recapping Set

Recapping set for Roland MKS-50The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the complete Instrument.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 29 .50*

Synth-Parts

Sequential Prophet VS complete Replacement Set tactile Switch

Complet replacement set tactile switch for Sequential Prophet VSconsist of:1 pcs. orange button + 1 red LED1 pcs. blue button + 1 red LED8 pcs. black button + 1 red LED10 pcs. blue button31 pcs. black buttonOperational Life for all switch: 3.000.000 CyclesThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 198 .99*

Synth-Parts

E-Mu Orbit V2 Recapping Set

Recapping set for E-Mu Orbit V2The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.This Recapping Set contains all necessary Capacitors for Switching Power Supply. Warning PSU Recapping:Risk of electric shock:Switching power supplys store high voltage and high energy for a very long period of time.When working with these spare parts offered here, you are working directly in a 230VAC circuit.Observe polarity. Incorrect installation will cause explosion and fire.For experts only: Be aware of dangers of electric current

€ 22 .49*

Synth-Parts

Waldorf Microwave 2 Recapping Set

Recapping set for Waldorf Microwave 2The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Waldorf Microwave 2 is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for complete Waldorf Microwave 2The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 15 .35*

Synth-Parts

Sequential Circuits Propeht 5 REV 2 complete Set Potentiometer

Slider set brand new Sequential Circuits, SCI Potentiometer forSequential Circuits Prophet 5 REV2 Serial 183 - 1300The potentiometers that were installed in the Prophet 5 have a significant disadvantage. This disadvantage is that the axis used was made of Plastic. This plastic axle breaks off easily and it is no longer possible today to get the original spare parts. A potentiometer with metal axis.Appearance (technical characterisation):We offer here a brand new potentiometer as a replacement for the potentiometer used in Sequential Circuits synthesizers.Resistance: 100 KOhmQuantity: 26 pcs.Changes to the original Pot:+ Metal axle instead of plastic axle.o 8mm thread Original potentiometer has inch thread with 9.5mm- Soldering pins are 2 mm wide. The original is 1.5 mm. The holes in the board are 2,08 mm wide. Maybe holes have to be drilled with a bit.Usefull hint:Delivery includes Nut and Washer.Since this is a two-sided board, please note, when soldering the new potentiometer must be soldered on both sides.The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 199 .00*

Synth-Parts

Yamaha MA60 Recapping Set PSU

Recapping setYamaha MA60 Recapping Set PSUThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the PSU.The Capacitors are firmly soldered to a circuit board. For replacing the capacitor craftsmanship and experience in soldering is required.

€ 33 .50*

Bundels

Filter products

Bundels