Roland Juno Serie

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

ALPS

tactile switch 5 mm for Roland

tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Synth-Parts

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .44*

ALPS

tactile switch 4,3 mm

1 pcs. tactile switch suitable for modelsKorg MonopolyKorg PolySixKorg BX3/CX3 first Version build in 1980'sRoland JX 10PRoland Jupiter 8Roland TR808Part Number: Korg: 37503400, Roland: 13169601The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .93*

SCHULZKABEL

Power cable 2 pol for Roland, 2m

Power cabel 2m with 2P plug for Roland InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 mAlso forKorgAkai

€ 9 .64*

Synth-Parts

Slidepotentiometer für Roland Juno 106 - EWA-NK0D15B54

1 pcs. Slide potentiometer with 30mm travel and 15mm Lever. (Custom built with dust cover for Synth-Parts)Suitable for Roland Juno 106 all without Bender Board This volume control with the labelling EWA-NK0D15B54 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part. Electrical properties: The stereo nominal resistance has 50 kOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt. Appearance (technical characterisation): This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of metall. Its height is 15 mm, the breadth is 4 mm at the top and 5 mm at the bottom. Depth is 1,2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function. In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically. Useful hint: The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 7 .50*

Synth-Parts

Volume Potentiometer Roland Juno 1,2 JV-80,90

1 pcs. slide potentiometer with 30mm travel and 15mm Lever. Suitable forRoland Juno 1 VolumeRoland Juno 2 VolumeRoland JV-80 Volumen,Presence,C1Roland JV-90 Volumen,Presence,C1Roland RD-250s VolumeRoland RD-300s VolumeThis volume control with the labelling EWANA0X15B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 k? (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 8 .33*

ALPS

Roland juno 106 Bender Slide potentiometer

1 pcs. Slide potentiometer with 20mm travel. Suitable forSchiebepotentiometer Juno 106 - BenderAppearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements.The slide potentiometer has a travel of 20 mm.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 9 .76*

Roland

Roland SK3 Rubbercontact 12P x1

1 pc. Contact rubber for old Roland keyboard Features: Height of contacts: 8 mm width of the strip: 16 mm Length of the strip: 162 mm Number of contacts per strip: 12 contactsOne contact strip consists of 12 contacts and thus covers one octave.This contact rubber has a notch to allow the contact rubber to be split. The division occurs with 7/5 contacts

€ 13 .90*

Synth-Parts

IC Socket 17P for D5534A

1 pcs. IC Socket for D5534ATechnical Hint:The IC socket has 17 legs with a grid of 2 mm. The IC D5534A has 16 legs + an empty position as a built-in marker. I think it makes sense to take over this empty position for the IC socket as well. The corresponding soldering pin can be easily pushed out.Mounting of this part requiers soldering.

€ 1 .99*

Analogue Renaissance

Roland 80017A VCF VCA clone

1 pcs. Roland 80017A VCF VCA clonewe offer here a brand new clone of the original Roland Voice Chip with some Mechanical Description:This Voice Chip is manufactured by Analogue Renaissance with modern and actual SMD technic. The outline Dimensions and Pin configuration are same as the original Roland Voice Chip 80017A.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are

€ 58 .80*

Synth-Parts

Roland Juno 106 Replacement stereo rotary potentiometer

1 pcs. Replacement stereo rotary potentiometer suitable for volume control inRoland Juno 106Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 17 mm, the total length without pins is 31,5 mm. In this total length the casing is 11 mm long. On this casing is the thread with 5 mm length connected. The axis has a diameter of 6 mm. It is made of Metall. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The six solder pins are 1 mm wide (one of them) and they are arranged in two rows in a distance of 5 mm (pitch).Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .99*

Synth-Parts

16 pcs. Slidepotentiometer für Roland Juno 106 - EWA-NK0D15B54

16 pcs. Slide potentiometer with 30mm travel and 15mm Lever. (Custom Built with dust cover for Synth-Parts)Suitable forRoland Juno 106 all without Bender BoardWe offer here a special version of this slider including a Dust CoverThis volume control with the labelling EWA-NK0D15B54 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 50 kOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of metall. Its height is 15 mm, the breadth is 4 mm at the top and 5 mm at the bottom. Depth is 1,2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 89 .25*

Varta

CR2032 Solder pin for Roland Juno 106

1 pcs. CR2032 with solder pin suitable for Roland Juno 106Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version.Practical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .34*

Analogue Renaissance

Wave Generator D5534A clone

1 pcs. Wave Generator IC D5534A clonewe offer here a brand new clone of the original Roland Wave Generator Chip with some Mechanical Description:This Chip is manufactured by Analogue Renaissance with modern and actual SMD technic. The outline Dimensions and Pin configuration are same as the original Roland Wave Generator Chip MC5534A.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are

€ 34 .50*

Synth-Parts

LED 3 mm Red

1 piece LED 3 mm Redin

€ 0 .99*

Synth-Parts

Roland Juno Potentiometer B50K EVA TOHC14B54

1 pcs. new Slide potentiometer with 30mm travel. Suitable Slider forSlider forRoland Juno 6 HPF,VCF FRQ,VFC RES, Bender VCFRoland Juno 60 all, without Arp-Rate, LFO-Rate, Bender DCOElectrical properties:The nominal resistance has 50 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,2 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins and the hight of housing, which today are no longer usual. In total four solder contact pins are laterally ordered to a group of two pins at the top and the end of the slide potentiometer.The slide potentiometer has a travel of 30 mm.Useful hint to Roland Juno Slider:The Lever of the original potentiometer has a strate shape. The Lever of the potentiometer offered here adapts to this shape because the Lever is slit.Arrangement of solder pins: The solder pins on this replacement part are arranged slightly offset. The solder pins must be bent slightly before soldering.The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 9 .87*

Synth-Parts

Key Guide NEW for Roland SK3 Keyboard

Replacement–set for broken key guides on Roland SK3 KeyboardsWith Roland Synthesizer and electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for old Roland instruments, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Roland key guides in an identical way. Therefore we offer you a matched spare part set for your Roland piano in our store.So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. YIncluded in the set:– Matched tube suitable for a keyboard with 88 keys.Tecnical advice for Grease:As we know there was no use of grease in these old keyboards.

€ 16 .66*

Synth-Parts

Roland Alpha Juno-1 Juno-2 OLED Display NEW, LCD Replacement blue

Color: Blue

1 pcs. OLED Display New forRoland Alpha Juno-1Roland Alpha Juno-2This OLED Display for Roland Alpha Juno-1 and Roland Alpha Juno-2 replacement is a really easy swapping. We will prepare this oled display in this way that ou will only need a screwdriver. Cable connection is done into a socket.Advice to Eprom Version in Roland Juno 1 and Juno 2Does the display only show half? That is, the first 8 characters are displayed normally but the remaining 8 characters remain dark? This can happen with an old Eprom version in the instrument. In this case the Eprom must be replaced by a current OS version.For Roland Juno 2 exists to different OS version 2.5. Only one supports OLED. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. Lifetime is different and depends on used color. After this specified drive time, the display still has 50% of its original luminosity.

€ 58 .99*

Synth-Parts

Roland Juno 6 60 JX3P Replacement stereo rotary potentiometer

1 pcs. Replacement stereo rotary potentiometer suitable for volume control inRoland Juno 6Roland Juno 60Roland JX3PElectrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 17 mm, the total length without pins is 31,5 mm. In this total length the casing is 11 mm long. On this casing is the thread with 5 mm length connected. The axis has a diameter of 6 mm. It is made of Metall. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The six solder pins are 1 mm wide (one of them) and they are arranged in two rows in a distance of 5 mm (pitch).Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .99*

ALPS

Roland Juno 106 / S-50 Complete Set 34 tactile switches

34 tactile switches suitable for Roland Juno 106Roland S-50Roland Part Number: 13169633 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 18 .94*

Synth-Parts

CD4052BE Multiplexer, DIP16

1 pcs. CD4052BE Multiplexer, DIP16Mechanical Description:The Multiplexer is housed in a DIP 16 package and is designed for mounting on a circuit board. The Logic Circuit has 2 x 8 connecting pins with grid of 2.54 mm x 6.6 mm.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are

€ 1 .49*

Synth-Parts

Roland Juno 106 Recapping Set complete

Recapping set for Roland Juno 106The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Roland Juno series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe set consists of 88 electrolytical CapacitorsThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 64 .00*

Filter products

Roland Juno Serie