Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

E-Mu Vintage Keys

Encoder 22 mm for E-MU Sytems
Synth-Parts
Encoder 22 mm for E-MU Sytems
1 pcs. Encoder 22 mm suitable for some E-MU Systems instrumentsE-mu ESIE-mu E4XT     depends on manufacturing dateE-mu e6400   depends on manufacturing dateE-mu e-synth ultraE-mu Proteus 1Practical advice:this encoder was used in some few E-Mu Instruments. Please have a look in your instrument first if this is the right one for you. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 10 .71*
E-Mu Vintage Keys OLED Display NEW white
Synth-Parts
E-Mu Vintage Keys OLED Display NEW white
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 58 .99*
Tactile switch 15,4 mm
Synth-Parts
Tactile switch 15,4 mm
Tactile switch suitable for  The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.Why should I solder new pushbutton

€ 3 .36*
BR2330
Panasonic
BR2330
1 pcs. Lithium Battery BR-2330Attention: Shipping for Europe only Technical Description:The dimensions of BR2330 are diameter of 23 mm and a thickness of 3 mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 4 .78*
E-Mu Vintage Keys OLED Display NEW yellow
Synth-Parts
E-Mu Vintage Keys OLED Display NEW yellow
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 58 .99*
E-Mu triple female MIDI Socket for PCB, Jalco, YKF51-5046
Jalco
E-Mu triple female MIDI Socket for PCB, Jalco, YKF51-5046
1 pcs. triple MIDI DIN socket female 5 pin for printed circuit for E-MuJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in most e-mu sampler.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*
1 pcs. Cap round for power switch
Synth-Parts
1 pcs. Cap round for power switch
 1 pcs. Cap round for power switch

€ 2 .44*
Cap round 12 mm for tact switch
Synth-Parts
Cap round 12 mm for tact switch
 1 pcs. Cap round 12 mm for tact switchThis cap for stylus has a diameter of 12 mm and a receptacle of 3 x 3 mm.Suitable as a spare part for E-Mu sampler

€ 3 .39*
E-Mu Vintage Keys OLED Display NEW blue
Synth-Parts
E-Mu Vintage Keys OLED Display NEW blue
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 58 .99*
E-Mu Vintage Keys OLED Display NEW green
Synth-Parts
E-Mu Vintage Keys OLED Display NEW green
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 58 .99*
E-Mu Vintage Keys OLED Display NEW red
Synth-Parts
E-Mu Vintage Keys OLED Display NEW red
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 58 .99*
E-Mu Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with one Switch
Nord
E-Mu Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with one Switch
1 pcs. Phone Jack 1/4- 6.3 mm, stereo witch one Switch, for printed circuit used by E-mu E4KE-mu E-SynthE-Mu E4 XTE-Mu e6400Technical description:The offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .84*