MPC 4000
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg         partnumber: 454004400Roland     partnumber: 13449125  HLJ0520-01-010Roland     partnumber: 13449145  YKB21-5010Yamaha   partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 piece tactile switch suitable for modelsAKAI MPC-500AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000Akai Part Number: Â ES-349474 und ES-411687NThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 pcs. Slidepotentiometer suitable for Akai MPC-2000           NOTE-VARIATIONAkai MPC-2000XL       NOTE-VARIATIONAkai MPC-2500         Q-LINK Q1 und Q2Akai MPC-4000       Q-LINK Q5 und Q6Akai MPC-5000        Q-LINK Q1, Q2, Q3 und Q4The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.Â
1 piece Tactile switch 12 mm suitable for models AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000These switch is used for REC,PLAY,STOP,TAP (6 pcs)Part Number: : ES-415015JThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required
Complete Set tactile switch suitable for AKAI MPC-4000Part Number: :  AKAI: ES-415015J and ES-349474 and ES-337521The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required
1 pcs. CR2025Attention: Shipping for Europe only Technical Description:The dimensions of CR2025 are diameter of 20 mm and a thickness of 2.5 mm. Manufacturer: Panasonic or Varta Information for handling old Battery's
Spare parts for Akai MPC 4000 easy to order online
The MPC-4000 was first introduced in 2002 and is the flagship of the AKAI Music Production Center series. Whether at home, in the studio, or in the club, the sampler is an indispensable tool for music production. With its large display and the possibility to expand the internal memory up to 512 MB, this device was, and still is, the centre of music production. Another highlight is that the MPC 4000 can process samples with 24 bit and 96 khz. This makes high-quality samples possible.
But high-quality samplers like the Akai MPC 4000 are also devices that must reliably withstand continuous use.
The six knobs of the MPC4000, the two sliders and the rotary encoder, however, are subject to a natural ageing process, as is the display of the MPC 4000. The same applies to the numerous buttons for menu navigation on the MPC 4000, or the stereo jack sockets on the back of the unit. These also have a limited lifespan. Some buttons are used more often, and therefore wear out faster than others.
Spare parts supply
The above-mentioned potentiometers and buttons, as well as the display, can be replaced with modern spare parts. This will turn the much-used music device back into the favourite piece in your home studio, or for stage use.
We have the necessary components in stock in our warehouse. You can easily order the buttons and controls for self-installation. If you are unable to remove and install the spare parts yourself, you can also send your MPC4000 to our specialist workshop for repair. We offer AKAI MPC spare parts products in our shop that continue the brand quality in the usual way even after component replacement. These include synthesizer spare parts and sampler spare parts, such as encoders for Akai MPC 4000, jack sockets for print mounting or LCD display for Akai MPC 4000.
Repair
If you do not want to or cannot carry out the repair or replacement of the spare parts, we offer you the professional execution of this work in our qualified specialist workshop. High quality and durability are essential for spare parts. Whether you want to buy an encoder for Akai MPC 4000 or a button for Akai MPC 4000, professional quality is indispensable. We are happy to answer your questions. Are you looking for a jack socket for print mounting? An Akai sampler spare part? No matter what you need: We will advise you competently so that your favourite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your efficient contact when it comes to installing spare parts.
Talk to us.