Skip to main content Skip to search Skip to main navigation

Filter products

Kawai EGP-10

Panasonic

Average rating of 0 out of 5 stars

tactile switch 5 mm for Kawai
1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*
E-Switch

Average rating of 0 out of 5 stars

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 9 .45*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm
1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

€ 1 .99*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 2 pol for EU, 1.8m
1 pcs. Power cabel 1,8 m with 2P plug for Europe  

€ 6 .89*
Kawai

Average rating of 0 out of 5 stars

1 pcs. Kawai Power Button for CA/CN Modells
1 pcs. Kawai Power Button for CA/CN Modells Technical Description of Kawai Button:This Button fits for many Kawai Pianos and is build for a Casing Window of 17 x 11 mm. This part has one Button. It is used with Powerswitch with plungers.Practical tip:This button is simply clipped on 

€ 11 .36*
Kawai

Average rating of 0 out of 5 stars

Kawai Round Knob for Stage Serie
1 pcs. Kawai Round KnobKawai MP-8Kawai MP-7Kawai MP7SEKawai MP-11Technical Description of Kawai Knob:This Round knob will be put on rotary potentiometer on your Kawai Stage Pianos

€ 11 .07*
Kawai

Average rating of 0 out of 5 stars

Kawai Volume Slider Knob for CA/CN Serie
1 pcs. Kawai Volume Slider Knob for CA/CN SerieKawai CA95Kawai CN23 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Pianos 

€ 8 .69*

High-Quality Spare Parts for Electronic Keyboard Instruments

Electronic keyboard instruments, including e-pianos, stage pianos, hybrid pianos, and synthesizers, are essential tools for musicians worldwide. Over time, these instruments may require maintenance or repair to ensure optimal performance. Access to reliable and compatible spare parts is crucial for extending the lifespan of these valuable devices.

Compatibility and Use Cases

Our selection of keyboard spare parts caters to a wide range of models and brands, ensuring compatibility and ease of integration. Whether you are replacing replacement keys, repairing a keybed, or addressing issues with contact rubbers, our inventory supports diverse repair needs. These components are ideal for both professional technicians and experienced users seeking to maintain their instruments.

Essential Spare Parts for Repairs

Key components like potentiometers, encoders, and tactile switches are critical for the precise operation of electronic keyboards. We also offer PCB repair solutions for addressing complex electronic issues. Our inventory includes both OEM spare parts and EOL spare parts, ensuring availability for current and discontinued models alike.

Professional Repair Services

For those seeking expert assistance, our professional repair service ensures that your instrument is restored to its original condition. Our team of experienced technicians utilizes high-quality components and advanced techniques to deliver reliable results.

Maintaining your electronic keyboard instrument with the right spare parts not only enhances its performance but also preserves its value. Explore our extensive range of e-piano spare parts, stage piano spare parts, hybrid piano spare parts, and synthesizer spare parts to find the perfect solution for your repair needs.