Korg 01/W Pro

1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707    all expect 0 - 9Korg ProphecyKorg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs. Cap rectangular for power switchPlease note the dimensions. The original caps used to be larger on many instruments. Dimensions: 12 x 7 mmHight: 10 mm

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXDisplay for Korg 01/RW rack version please ordere hereWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsone SMD ResistorInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W Keyboard Version:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people.This Display is also available with this Colors:Black Character / White BackgroundWhite Character / Black Background 

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forKorg 01/W,Korg 01/W FDKorg 01/W ProKorg 01/W ProXDisplay for Korg 01/RW Rack Modul please order hereWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W Keyboard Version:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people.  

Recapping set Korg 01/WKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg 01/W series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Korg 01/W.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProX We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementPlease let us know your instrumnet. The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Dislpay in Korg 01/W:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people. 

1 pcs. Korg Pitch Bend PotentiometerThis is a replacement Poterntiomter for Korg Pitch Bender. This Potetniomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):THis Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

Power cabel 2m with 3P C13 plug   

1 pcs. Power cabel 3m with 3P C13 plug   

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Korg 01/W Volume Slide PotentiometerKorg 01WKorg 01/W FDKorg 01W ProKorg 01/W ProXOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Yellow LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProX We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  Yellow BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementPlease let us know your instrument.The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people 

1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m

AC Power Inlet with AMP Connectortechnical Dates:Termination AMP Socket 4,3 mm  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with AMP Sockets.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

1 pcs. Korg 01/W Data Entry SliderKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs.  key contact board suitable FS keyboardsThis key contact is usedWidth: 6 cmheigh: 1,4 cmContact Resitance: lower 1 Ohm