Kurzweil K1200

ALPS

tactile switch 7,3 mm

1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .93*

Hosiden

HLJ0544 Phone Jack 1/4 - 6.3 mm PCB Stereo ,Iron frame

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo, for printed circuit with Iron FrameThe item is the same asHLJ 0544-01-010Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating.Praktikal tip:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 4 .87*

Varta

Battery 2/3 Solder pins

1 pcs. Battery with 3 solder pins suitable for RPlease check right polarity! Attention: Shipping for Europe only The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 14 .28*

Cherry

Single pole rocker switch, 250V/6A with plug connections

Single pole rocker switch, switch design - OFF with plug connections suitable for modelsKorg Poly 61Korg Part Number: 375046006A / 250VACTermination plug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical description:Housing material is NYLON 66. This switch is provided for a snap-in mounting and there are corresponding spring lips on the narrow side of the housing . The housing cutout for installation should be 19.30 mm x 12.90 mmDimensions of the switch are width of 12,90 mm, length is 18,60 mm and higth is 13,70 mm plus 2 mm hight for rocker. The outside dimensions are 21 mm x 15 mm.Elektrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made via plug boots with 4.80 mm in width. The connection length is 7 mm.The electrical load is 6 A at 250 VAC.For switch replacement no special tools are needed because everything is plugged or clamped.

€ 3 .61*

Panasonic

Battery 2/3 Solder pin

1 pcs. Battery with solder pin suitable for RAttention: Shipping for Europe only Please check right polarity! The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 14 .28*

Synth-Parts

Kurzweil K1200 Recapping Set complete

Recapping set for Kurzweil K1200The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 54 .74*

Synth-Parts

Kurzweil K1200 OLED Display new

Color: Blue

1 pcs. brand new OLED Display forKurzweil K1200 We offer here a brand new OLED display as a replacement for the originaly used LCD display. No Seldering is required. This OELD Display fit only for K1200 Keyboard VersionHints for mounting:This new OLED Display for your Kurzweil K1200 kann be replaced very easy because your replacement OLED Display is a 1:1 replacement. The new OLED display will be delivered by us ready wired. No soldering work is necessary for this installation. Scope of delivery:1 pc. new OLED display, ready wiredMounting materialshort installation instruction Notes on disposal:every electronic component contains important raw materials that should be recycled. Please find out where in your city is a corresponding collection point for these components.

€ 58 .99*

Filter products

Kurzweil K1200