Nord Electro 3

Fatar

Contact rubber for Fatar Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Synth-Parts

1 pcs. tactile switch 13 mm Nord Black

1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 5 .99*

Nord

Clavia Nord Housing Screw 16 mm Black Phillips

1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.

€ 1 .69*

Nord

Clavia Nord Housing Screw 6 mm Black Phillips

1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

€ 1 .44*

Nord

Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch PCB

1 pcs Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phone jack is used by Clavia Nord Instruments often for Sustain Pedal.(This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .75*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo for PCB

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phonejack is used by Nord often for Headphone output and also for Right / LEft Line out. (This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .25*

Synth-Parts

PP Capacitor 4.7 nF Safety

1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters

€ 1 .99*

Nord

Clavia Nord Knob with line 4 mm

1 pcs. Clavia Nord Knob with line 4 mmThis control knob fits on a 4 mm D-axis. Nord used these knobs on older models. Especially for the volume potentiometer.Praktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .75*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB

1 pcs. Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is often used on Clavia Nord instruments for the control pedal and rotor pedal. (This information is without guarantee - please have a look on pinlayout of the phone jack. The pin layout of phone jack is unique.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .45*

Synth-Parts

1 pcs. tactile switch 13 mm Nord light gray

€ 6 .45*

Nord

Clavia Nord Knob Encoder

1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed.

€ 7 .95*

Nord

Nord LED lens, 6 arrows

Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 8 .16*

Nord

Nord LED lens surround 6

1 pcs Nord LED lens surround 6 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 7 .14*

Nord

Clavia Nord PSU Transformer 22770

1 pcs Clavia Nord PSU Transformer 22770 Electrical properties of 22770:Primary: 230 V AC or 2 x 115 V ACSec: 4 x 7,5 Volttransformer for PCB mountingPractical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

Nord

Nord LED lens single

1 pcs Nord LED lens single The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 2 .00*

Synth-Parts

1 pcs. tactile switch 13 mm Nord Red

€ 6 .78*

Fatar

Fatar TP/8P Keyboard, Replacement keys semi weighted ivory

Keys: Key C

Fatar TP/8P Keyboard, Replacement keys semi weighted ivory Fatar TP/8P keyboard is a touch sensitive Pianokeyboard with semi weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The semi weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 11 mm. The distance from the front side of the key is 12,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

€ 11 .50*

Nord

Clavia Nord Knob Encoder older modells

1 pcs. Clavia Nord Knob Encoder older modells Praktical tip:The knobs are just plugged on. No tools are needed.

€ 9 .45*

Nord

Clavia Nord Knob Encoder older modells

1 pcs. Clavia Nord cape for Encoder older modells Praktical tip:The knobs are just plugged on. No tools are needed.

€ 9 .45*

Nord

Nord LED lens 15 assembly, for rotary encoder

1 pcs Nord LED 15 lens assembly, for rotary encoder The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 5 .83*

Nord

Nord LED eight bezel, for arrow

1 pcs Nord LED eight bezel, for arrow The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 4 .94*

Nord

Nord LED lens shield 15

1 pcs Nord LED lens shield 15 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 7 .02*

Filter products

Nord Electro 3