Yamaha PSR-Serie

Panasonic

tactile switch 7 mm Yamaha

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie - without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

E-Switch

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 9 .45*

Yamaha

Contactrubber 16M CT2M for Yamaha

Rubbercontact: 12 Contacts

1 pcs. Contactrubber 16M CT2M suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-270Yamaha PSR-340Yamaha PSR-640Yamaha PSR-740Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S750Yamaha PSR-S770Yamaha PSR-S900Yamaha PSR-S910Yamaha PSR-S950Yamaha PSR-S970Yamaha PSR-1500Yamaha PSR-2000Yamaha PSR-3000These Contactrubber was buildt in two different colors. Function is in both cases the same.

Variants from €9.90*

€ 11 .90*

Jalco

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .81*

Yamaha

DC Power Jack 3 mm with solder pins, Yamaha

DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha PSR-S950Yamaha P-155technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .94*

Yamaha

Replacement keys and spare parts for Yamaha C61KG Keyboard

Auswahl Ersatzteil: Contactrubber 61P new

Spare parts for Yamaha C61KG KeyboardYamaha C61KG Keyboard is used inYamaha QS-300Yamaha QS-700Yamaha SY-22Color/tint: creme white

Variants from €2.36*

€ 27 .89*

Yamaha

Yamaha USB Socket Typ B PCB, YKF45-0021

1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 4 .49*

Yamaha

Yamaha USB Socket Typ A PCB, YKF45-0021

1 pcs. Yamaha USB Socket Typ A PCBJalco YKF45-0021used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 4 .49*

Yamaha

Replacement keys 16L for Yamaha

Key: Taste schwarze Octave

Key's 16L Style suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-340Yamaha PSR-450Yamaha PSR-710Yamaha PSR-750Yamaha PSR-910Yamaha PSR-950Yamaha PSR-1500Yamaha PSR-3000Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Variants from €9.90*

€ 12 .50*

Yamaha

Yamaha Replacement stereo rotary potentiometer 14mm

stereo rotary potentiometer for Volume, suitable forYamaha PSR-330 und 340PSR-530 bis 550PSR-630 und 640PSR-730 und 740PSR-1000, 1100, 1500PSR-2000, 2100, 3000PSR-S700 und S710PSR-S900 und S910CVP-207Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 5 mm long. The axis rises with 13 mm length. The axis has a diameter of 6 mm and is flattened on a length of 6mm. It is made of black plastic. Its head has a slot and ends in corner radius.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 1 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 5 .77*

Yamaha

Yamaha P-155 Round Knob black for Stage Piano

1 pcs. Yamaha Round KnobYamaha DGX-500Yamaha DGX-530Yamaha P-155Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S900Yamaha PSR-S910 Technical Description of Yamaha Knob:This Round knob will be put on rotary potentiometer on your Yamaha Stage Pianos

€ 6 .38*

Yamaha

Yamaha PA-300C Power Supply Unit

1 pcs external Power Supply Unit Yamaha PA-300C Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

Yamaha

Yamaha PA-150A Power Supply Unit

€ 39 .00*

Yamaha

Yamaha PA-130B Power Supply Unit

1 pcs external Power Supply Unit Yamaha PA-130B Replacement for Yamaha PA-3C PSU Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage.

€ 32 .13*

Yamaha

Yamaha Tyros Encoder 16 mm footprint

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha VU48130R REB161-PVB

€ 8 .45*

Yamaha

Yamaha Keyboard grease, 50g

1 pcs. Yamaha Spezial Keyboard grease, 50gOriginal Yamaha plastic grease for Keyboards. Yamaha now also uses the blue key grease like in the GHD keyboards at this point.Grease will be delivered in a 50 gramm tube.This grease is used on Yamaha PSR Series. The original grease was probably a white grease.

€ 35 .50*

Synth-Parts

CCFL neon lamp 100 x 2,2 mm for LCD Display Backlight

1 pcs. CCFL neon lamp 100 x 2,2 mm with cape for LCD Display BacklightYamaha PSR-S700Yamaha PSR-S900Safety advice to CCFL tubes:These neon tubes are very sensitive. Handling and mounting must be done very very carefully.The fluorescent tubes are operated with a high voltage of approx. 180V AC. Please observe the corresponding safety regulations of the VDE.

€ 43 .49*

Yamaha

CIRCUIT BOARD, DM PSR8000

1 pcs. CIRCUIT BOARD, DM PSR8000Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 349 .99*

Synth-Parts

Yamaha PSR-7000 Recapping Set PSU

Recapping set forYamaha PSR-7000 PSUThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Safety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Power Supply UnitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 47 .49*

Yamaha

Yamaha 16L Keyboard Felt 61 Key Lower

1 piece Yamaha lower key strike felt for electric piano keyboardsThis felt is used by Yamaha in the 16L keyboard, as found in the PSR-3000, for example. This felt is located at the front of the keyboard.For easier installation, this felt is equipped with adhesive tape.The felt is designed for a 61-key keyboard.

€ 9 .95*

Synth-Parts

Replacement stereo rotary potentiometer 14mm

1 pcs. Replacement stereo rotary potentiometer 14mm widht for Volume, suitable forYamaha RS-7000Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 5 .89*

Yamaha

Stereo rotary potentiometer 14mm for Yamaha

1 pcs. Replacement stereo rotary potentiometer 14mm suitable forYamaha PSR-S900Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .55*

Filter products

Yamaha PSR-Serie