Yamaha CP4

Panasonic

tactile switch 9,5 mm Yamaha

tactile switch suitable for Yamaha ModellsRS7000 (REC/Play/Stop/<)RM1X (Control Buttons without Keyboard)Motif 6, Motif 7,Motif 8 (switch without LED)Motif XS, Motif ES (switch without LED)Yamaha Part Number: VZ085500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Yamaha

Yamaha GH3 NL2 Stopper Upper 88, felt

1 pcs. Yamaha GH3/NL2 Stopper U88 V8468201This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. Old spare part no is: VU34210R

€ 34 .89*

Panasonic

tactile switch 7 mm Yamaha

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie - without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Yamaha

Yamaha GH3 Stopper Lower88

1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards.

€ 27 .49*

Yamaha

Contactrubber GH3 for Yamaha

Contactrubber GH3 suitable for Yamaha This keyboard is used in these modells:Yamaha CVP-305Yamaha CVP-307And much more other Modells.For a complete Keybord with 88 keys you will need this quantity on contactrubber:1 x 5 contacts6 x 12 contacts1 x 11 contacts

€ 13 .19*

Yamaha

Yamaha GH3 Actuate Rubber

1 pcs. Yamaha GH3 Actuate RubberThis rubber fits in these keyboardsYamaha GHDYamaha GH3Yamaha NL2This rubber is used on every single key as stopperColor: black

€ 2 .08*

Jalco

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .81*

ALPS

Yamaha Tyros 3,4,5 ASSIGN slide potentiometer

1 pcs. Slide potentiometer with 20mm travel. Suitable forYamaha Tyros 3 - Assign Slider 1-8Yamaha Tyros 4 - Assign Slider 1-8Yamaha Tyros 5 - Assign Slider 1-8 Appearance (technical characterisation):The slide potentiometer has a travel of 20 mm.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 8 .27*

Yamaha

Yamaha NL2 Keyboard key

Keys: Key C

Replacement Keys for Yamaha NL2 KeyboardThese Keys fits for all Yamaha NL2 keyboards.Yamaha NL2 keyboard is used in:Yamaha CP5Note on the keys supplied:The keys are delivered without the black rubber that is mounted at the bottom of the key. The black rubber is taken from the old key. The rubber is clicked in and can be easily replaced. The Yamaha NL2 keyboard is a velocity-sensitive keyboard. The keys have a wooden core that is covered with plastic.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €10.71*

€ 11 .84*

Yamaha

Yamaha CP4 CP40 LCD Display new

1 pcs. brand new LCD Display with backlight suitable forYamaha CP4 Stage PianoYamaha CP40 Stage PianoWe offer here the original Yamaha spare part. Scope of delivery:1 pc. new LCD display, ready wired Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise. Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components.

€ 129 .71*

ALPS

tactile switch 7,3 mm for Yamaha

1 pcs tactile switch 7,3 mm for YamahaThese tact switch are soldered onto a circuit board. Manual skills and experience in soldering are required to replace the tact switch.why should I solder new pushbutton

From

€ 1 .37*

Filter products

Yamaha CP4