Skip to main content Skip to search Skip to main navigation

Filter products

E-Mu Darwin

Synth-Parts

Average rating of 0 out of 5 stars

E-MU Switching Powersupply 65W internal
1 pcs 65W internal Switching Power Supply Unit brand new, suitable forE-mu E4KE-mu E-SYNTHE-mu E6400E-mu E4 PlatinumE-mu E5000 UltraE-mu E6400 UltraE-mu E4XT UltraDescription:This switching power supply is a perfect replacement for many E-mu devices. In many devices Emu has used the same power supply unit.Our brand new replacement switching power supply has exactly the same mechanical dimensions and the same connectors as the original power supply. Plug and Play.63 Watt power upgrade: The original E-Mu power supply has an output of 43 Watt and must be operated with an internal fan in any case. If extensions such as additional memory or additional drives are installed, the original power supply unit will not be able to supply this power. This is where a power supply upgrade comes in handy.Our 65 Watt power supply unit also needs a fan when the E-Mu is fully extended. Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 63 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.Make absolutely sure that the connection cables to the power supply have no contact with the cooling element of the power supply. Due to the development of heat, the insulation of the cable can melt and cause a short circuit or worse tripping. 

59 .64*
Nord

Average rating of 0 out of 5 stars

Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with one Switch
1 pcs. Phone Jack 1/4- 6.3 mm, stereo witch one Switch, for printed circuit used by E-mu E4KE-mu E-SynthE-Mu E4 XTE-Mu e6400Technical description:The offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

7 .84*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 3 pol C13 Socket, 1.8 m
1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m

6 .45*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 3 pol C13-plug, 3m
1 pcs. Power cabel 3m with 3P C13 plug   

9 .64*
Jalco

Average rating of 0 out of 5 stars

E-Mu triple female MIDI Socket for PCB, Jalco, YKF51-5046
1 pcs. triple MIDI DIN socket female 5 pin for printed circuit for E-MuJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in most e-mu sampler.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

10 .89*
Synth-Parts

Average rating of 0 out of 5 stars

E-Mu Darwin LCD Display black with cable Kit
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forE-mu DarwinWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The display is prepared by us ready to plug in. All adjustments to the technical features of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. Our recommendation is to remove this part of the circuitry. It is sufficient to remove one or two components with a side cutter.However, we would like to point out that there is very little space in most units. This work should only be done by technically experienced people.Installation service:We are also happy to install the display for you. Please ask. 

99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

E-Mu Darwin LCD Display white with cable Kit
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forE-mu DarwinWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: black Character  /  white BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD in Emu Darwin:The display is prepared by us ready to plug in. All adjustments to the technical features of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. Our recommendation is to remove this part of the circuitry. It is sufficient to remove one or two components with a side cutter.However, we would like to point out that there is very little space in most units. This work should only be done by technically experienced people.Installation service:We are also happy to install the display for you. Please ask. 

99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

E-Mu Darwin LCD Display blue with cable Kit
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forE-mu DarwinWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The display is prepared by us ready to plug in. All adjustments to the technical features of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. Our recommendation is to remove this part of the circuitry. It is sufficient to remove one or two components with a side cutter.However, we would like to point out that there is very little space in most units. This work should only be done by technically experienced people.Installation service:We are also happy to install the display for you. Please ask. 

99 .00*

E-mu Darwin spare parts easy to order online

Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. We offer in our shop Darwin spare parts products, the brand quality continue even after replacement in the usual way. These include synthesizer replacement parts and sampler spare parts, but also encoders for Darwin, jack socket for PCB mounting or LCD display E-mu Darwin. One thing all E-mu spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the Darwin replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which E-mu Darwin button to buy, or which synth parts or sampler parts are right for the models you use. We are happy to help!


Do not compromise on quality



A system is only as powerful as its smallest component. For you, this means that Darwin brand-quality replacement parts, which you know from the manufacturer, should be purchased and installed. This applies to E-mu Darwin encoders as well as to the LCD display for E-mu Darwin or any other E-mu replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an encoder for E-mu Darwin or a button for E mu Darwin, the same professional quality is appropriate as when a device is fully purchased. For all questions we are gladly there for you. Jack socket Printmonage? Sampler spare part? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.