Korg M1R

ALPS

tactile switch 9,5 mm for Korg Synthesizer

1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707 all expect 0 - 9Korg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .64*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

E-Switch

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Varta

CR2032

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Synth-Parts

Korg M1R LCD Display new Yellow

1 pcs. LCD Display brandnew in Yellow forKorg M1Rthis is a plug in ready Display replacement for Korg M1R . You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.These different Display versions are available:BlueblackWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Jalco

Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

Synth-Parts

Korg M1R OLED Display new white

1 pcs. Korg M1R OLED Display brandnew in white this is a plug in ready OLED Display replacement for Korg M1R Rack Synthsizer. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.To install this OLED replacement display in the Korg M1R, first remove the housing cover of the synthesiser. The front panel is then removed. The display is now accessible and can be unscrewed. When mounting the new OLED display in the Korg M1, please use the spacer sleeves supplied.Not compatible with Korg M1 Keyboard version. This Display is a separate item.The color of the shown display, may differ from the original.Installation service for Korg M1R:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 108 .99*

Varta

CR2016 for PCM Card

1 pcs. CR2016 forKorg M1 PCM CardRoland JD-800 PCM CardAttention: Shipping for Europe only Technical Description:The dimensions of CR2016 are diameter of 20 mm and a thickness of 1,6 mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Synth-Parts

D/A-Converter PCM54HP, DIP28

1 pcs. PCM54HP - Digital-Analog-Converter for audio application von Burr BrownThis part is used inKorg M1Korg T1Korg T2Korg T3 Resolution: 16bitInterface: parallelCase: DIP28warm-up time: 1 minMechanical Description:The digital to analog converter is housed in a DIP 28 package and is designed for classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 2.54 mm x 15.24 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is parallel and provides a 16 bit resolution. It is a symmetrical supply voltage of +- 5V to +- 12V needed.

€ 17 .85*

Synth-Parts

Korg M1R LCD Display new blue

1 pcs. LCD Display brandnew in blue forKorg M1Rthis is a plug in ready Display replacement for Korg M1R . You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.These different Display versions are available:BlueblackWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Synth-Parts

Korg M1R Rack Modul recapping set complete unit

Korg M1 recapping set complete unitThis recapping set contains all electrolytic capacitors for a complete recapping of the Korg M1R rack module synthesiser. Also included are all safety-relevant ceramic and foil capacitors of the power supply.Safety note:You are working on components that are in direct contact with the mains voltage of 230 volts AC. This work is only suitable for specialists with appropriate electrical knowledge. The Capacitors are firmly soldered to a circuit board. For replacing the capacitors craftsmanship and experience in soldering is required.

€ 43 .49*

Synth-Parts

Korg M1R OLED Display new yellow

1 pcs. Korg M1R OLED Display brandnew in yellow this is a plug in ready OLED Display replacement for Korg M1R Rack Synthsizer. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.To install this OLED replacement display in the Korg M1R, first remove the housing cover of the synthesiser. The front panel is then removed. The display is now accessible and can be unscrewed. When mounting the new OLED display in the Korg M1, please use the spacer sleeves supplied.Not compatible with Korg M1 Keyboard version. This Display is a separate item.The color of the shown display, may differ from the original.Installation service for Korg M1R:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 108 .99*

Filter products

Korg M1R