Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Roland A-80

tactile switch 5 mm for Roland
ALPS
tactile switch 5 mm for Roland
tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .65*
YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
Jalco
YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*
Roland A-80 A-50 new LCD Display blue
Synth-Parts
Roland A-80 A-50 new LCD Display blue
1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit for Roland A-50Roland A-80We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Single pole rocker switch 250V/6A with solder lugs
NKK Switches
Single pole rocker switch 250V/6A with solder lugs
Single pole rocker switch with solder lugs suitable for modelsRoland6A / 250VACTermination Solder Lug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical Description:The switch housing consists of polycarbonate. The switch is provided for a snap-in mounting in a housing and having corresponding spring lips on the narrow side of the housing. Housing cutout for installation should be 19.30 mm x 12.90 mm. The switch itself has a width of 12.90 mm, a length of 18.50 mm and a height of 13.60 mm plus 3 mm height of the rocker. The outside dimensions are 20.8 mm x 14.8 mm.Electrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made with solder lugs for cable assembly. The length of the terminals is 2.9 mm with a width of 3 mm.The electrical load is 6 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 4 .76*
CR2032
Varta
CR2032
1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*
Synth-Parts
Roland A-80 A-50 new LCD Display black
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forRoland A-50Roland A-80 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  black BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Synth-Parts
Roland A-80 A-50 new LCD Display white
Blue LCD Display with LED Backlight replacement including cable Kit forRoland A-50Roland A-80We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  white BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Simply order spare parts for Roland A-80 online



Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. In our shop we offer you Roalnd Fantom spare parts products, which continue the brand quality after the replacement in the usual way. These include synthesizer replacement parts and key replacement parts, but also Fantom encoders, PCB mount phone jacks or LCD display for Roland A-80. One thing all Roland spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the Fantom replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which Roland A-80 probe to buy or what type of Replacement Parts or replacement key are right for the models you use. We are happy to help!


Do not compromise on quality



A system is only as powerful as its smallest component. For you, this means that Roland brand-quality replacement parts that you know from the manufacturer should also be purchased and installed. This applies to Roland A-80 encoders as well as the Roland Fantom LCD display or any other Fantom replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an Roland A-80 encoder or an Roland Fantom tact switch, you have the same professional quality as buying a complete device. For all questions we are gladly there for you. Phone jack socket for PCB? Replacement keys? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.