Korg Poly-61

ALPS

tactile switch 7,3 mm

1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .99*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Nichicon

Bipolar Capacitor 10uF/16V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 10uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .93*

Nichicon

Bipolar Capacitor 22uF/16V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 22uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .83*

KORG

Korg ESK7 Rubbercontact 6P x1

1 pc. Korg ESK7 Rubbercontact 6P x1 Features: Height of contacts: 8 mm width of the strip: 15 mm Length of the strip: 80 mm Number of contacts per strip: 6 contactsOne contact strip consists of 6 contacts and thus covers halfe octave.

€ 13 .90*

Synth-Parts

FFC socket 18 pin, 2.54 mm pitch

18 pin FFC socket with 2.54 mm pitch18 pinPitch: 2.54 mmLength: 51,18 mmdeepth: 4,50 mmhight: 6,70 mmThese socket is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

€ 4 .32*

Synth-Parts

Korg Poly-61 new FFC cable 18 pin, 2.54 mm pitch, 100 mm length

1 pcs. 18 pin FFC cable with 2.54 mm pitch and 100 mm length18 pinPitch: 2.54 mmLength: 100 mmcontactlength: 7 mmcontacts same sideThese cable is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

€ 11 .90*

Synth-Parts

Korg Poly-61 new FFC cable 6 pin, 2.54 mm pitch, 100 mm length

1 pcs. 6 pin FFC cable with 2.54 mm pitch and 100 mm length6 pinPitch: 2.54 mmLength: 100 mmcontactlength: 7 mmcontacts same sideThese cable is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

€ 4 .84*

Cherry

Single pole rocker switch, 250V/6A with plug connections

Single pole rocker switch, switch design - OFF with plug connections suitable for modelsKorg Poly 61Korg Part Number: 375046006A / 250VACTermination plug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical description:Housing material is NYLON 66. This switch is provided for a snap-in mounting and there are corresponding spring lips on the narrow side of the housing . The housing cutout for installation should be 19.30 mm x 12.90 mmDimensions of the switch are width of 12,90 mm, length is 18,60 mm and higth is 13,70 mm plus 2 mm hight for rocker. The outside dimensions are 21 mm x 15 mm.Elektrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made via plug boots with 4.80 mm in width. The connection length is 7 mm.The electrical load is 6 A at 250 VAC.For switch replacement no special tools are needed because everything is plugged or clamped.

€ 3 .61*

Synth-Parts

FFC socket 6 pin, 2.54 mm pitch

1 pcs. 6 pin FFC socket with 2.54 mm pitch6 pinPitch: 2.54 mmLength: 17 mmdeepth: 4,50 mmhight: 6,70 mmThese socket is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

€ 4 .32*

Varta

Varta 3/V 150 NI-MH Akku with solder pins for Korg

Varta 3/V 150 NI-MH rechargeable with 2 solder pin suitable forKorg PolySixKorg Poly-61Varta produces two almost identical batteries of this type. The main difference is the design of the housing.Attention: Shipping for Europe only Dimensions for PCB layout: 17,7 x 10 mmTechnical Description:The dimensions of 3V/150 are hight of 26,8 mm and a deepth of 17,7 mm. The distance between the solder legs is 17,7 mm. The + pol has to legs with a distance of 10 mmThe akku is charged and ready for use.Practical tip:The akku is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 10 .95*

Filter products

Korg Poly-61