Roland Fantom X6

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for models RolandFP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP-50JV25, JV30, JV35, JV50, JV80, JV90, JV880, JV1080JP8000JD800 - Cursor ButtonsMC-303, MC-307RD-500XP10, XP50, XP60, XP80XV3080U20Fantom X6,X7,X8 without REC/PLAY/STOPOnly for non-illuminated buttons:A90, A90-EXXP30JV1000JP8080RD-600,RD-700Roland Part Number: 13169697 or 13169752The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Synth-Parts

Replacement stereo rotary potentiometer for Roland Fantom X-series, volume control EVJY10FB6A24

1 pcs. Replacement stereo rotary potentiometer for Roland Fantom X-series, suitable for volume control and ext. Level - EVJY10FB6A24Roland Fantom SRoland Fantom FARoland Fantom X6Roland Fantom X7Roland Fantom X8Roland RD-64This volume control is no longer available at the original equipment manufacturer Roland, because Panasonic, the producer of the pot, does not longer produce the production-model. The here shown replacement pot is identical in construction and 100% compatible with the original Roland part volume EVJY10FB6A24.Electrical properties:The stereo nominal resistance has 20 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 12 x 12 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 13,8 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 6 .25*

ALPS

Single pole push switch, 250V/5A with solder pins for PCB

1 pcs. Single-pole push switch in the switch design - OFF with solder Pins for PCB mounting suitable for modelsKorg EA-1Korg EMX-1Korg ER-1Korg Part Number: 375014800technical Dates:Voltage: 250VACCurrent: 5ATermination Solder PinVDE-tested Supplied without capMechanical Description:The housing of the switch is made of Plastic. The switch is provided for P.C.B. mounting. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 12,6 mm, a length of 17 mm and a height of 12.80 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 7 .95*

ALPS

Encoder 12 mm for Roland

1 pcs. Encoder 12 mm suitable for modelsRoland Juno Di, Juno G, Juno GiRoland Fantom X6Roland Fantom X7Roland Fantom X8Roland MC909Roland part number: 03122134 and 01905467Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .25*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with 2 switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo with two switch, for printed circuitThis part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Yamaha DX7Technics SX -PX20Technical descriptionThe offered phone jack for PCB mounting is a stereo jack two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 3 .99*

Jalco

Roland triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in newer Roland instruments.used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

Roland

Dial Knob Roland Fantom X

1 pcs Dial Knob suitable forRoland Fantom X6Roland Fantom X7Roalnd Fantom X8

€ 9 .89*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuitHosiden HLJ7001-01-3010This part is used inRoland JP-8000Technics E-PianosTechnics Keyboards Technical descriptionThe offered phone jack for PCB mounting is a Stereo jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .78*

Synth-Parts

LCD Display for Roland X6, X7, X8

LCD Display forRoland Fantom X6Roland Fantom X7Roland Fantom X8

€ 259 .00*

Roland

Knob for Roland Fantom X Serie

Knob for rotary potentiometers inRoland Fantom FARoland Fantom SRoland Fantom X6Roland Fantom X7Roland Fantom X8Roland Fantom XaSpecifications:Diameter top: 10.4 mmDiameter bottom: 17.8 mmHight: 17.2 mmShaft: 6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

€ 5 .58*

Roland

Roland Fantom XR Power Switch Knob

1 pcs. Knob for power switch inRoland Fantom XRSpecifications:Dimension: 18x18 mmHight: 10 mmTechnical description:Praktical tip:The knobs are just plugged on. No tools are needed.Price is for one Knob without switch

€ 6 .55*

Roland

Pitch Bend Assembly for Roland Fantom series

Pitch bend Assembly PB-H0204 for Roland Fantom series Synthesizer / Music Production WorkstationThis pitch bend unit is complete and ready to plug in wired for easy exchanging this unit. The unit fits every Roland Fantom Synthesizer. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all.Roland part number: PB-H0204

€ 38 .00*

Synth-Parts

Rotary Poti vertical, 9 mm for Roland Fantom X

1 pcs Rotary Potentiometer vertikal 9 mm, 10kOhmSubstitute rotary potentiometer for Roland Fantom X6 - Realtime ControlRoland Fantom X7 - Realtime ControlRoland Fantom X8 - Realtime ControlElectrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 9,7 x 12,5 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The Three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 11 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 3 .75*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .25*

ALPS

tactile switch 8 x 8 x 10,5 mm KEC10010 - Discontinued

tactile switch suitable for modelKorg DVP-1Korg EX8000Korg SDD-2000 und Korg SDD-3000Roland Fantom X6, X7 und X8Roland MC307Korg replacement part no: 37504800Roland replacement part no: 894645The construction part is not longer built. The old serial number was KEC10010 With that serial number the part was built during the 1980s.The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 4 .64*

Roland

Parts for Roalnd SK9 Keyboards

Key: Spring

Parts for Roland SK9 KeyboardsHere you will find all parts like springs, felt, aftertouch and P.C.B.

€ 3 .33*

Roland

Contact rubber for Roland SK9 Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Roland SK9 Keyboardstechnichal dimensionsNo of contacts: 7,8, 12 or 13Width: 21 mmheigh: 9.8 mm

€ 13 .98*

Roland

Replacement keys, weighted for Roland SK9 Keyboard

Key: Key A

Keys, weighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inFantom (FA76)Fantom G6, G7Fantom SFantom X6, X7XP-10Color/tint: pure white

€ 9 .87*

Hosiden

Roland Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Roland Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Please have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .25*

Ersatzteile für Roland Fantom X6 einfach online bestellen

Synthesizer sind Geräte, die einer Dauerbelastung ausgesetzt sind und diese auch zuverlässig standhalten müssen. Das gilt für den privaten Bedarf, ebenso wie für den professionellen Einsatz. Wenn kleinste Bauteile nicht funktionieren, kann die gesamte Anlage nicht den gewünschten erstklassigen Sound liefern. Wir bieten Ihnen in unserem Shop Fantom Ersatzteilprodukte, die Markenqualität auch nach dem Austausch in gewohnter Art und Weise weiterführen. Dazu gehören Synthesizer Ersatzteile und Tasten, aber auch Encoder für Roland, Klinkenbuchse für Printmontage oder LCD-Display für Roland Fantom X6. Eines haben alle Fantom Ersatzteile in unserem Shop gemeinsam: Sie überzeugen in Material- und Ausführungsqualität. Wir wissen, wenn Musiker in die Tasten hauen oder Techniker ihren Job machen, ist keine Zeit für lange Ausfälle. Daher sind die Roland Ersatzteile optimal kompatibel und können problemlos und vor allem rasch und unkompliziert ausgetaucht werden. Der Gig oder die Probe kann anschließend sofort weitergehen. Rufen Sie uns einfach an oder schicken Sie eine Mail, wenn Sie sich nicht sicher sind, welchen Taster für Roland Fantom X6 Sie kaufen sollen, oder welche Synthesizer Ersatzteile oder Tasten die richtigen für die Modelle sind, die Sie verwenden. Wir beraten Sie gerne!

Keine Kompromisse bei der Qualität eingehen

Eine Anlage ist nur so leistungsfähig wie ihr kleinstes Bauteil. Das bedeutet für Sie, dass auch Fantom X6 Ersatzteile in Markenqualität, die Sie vom Hersteller kennen, gekauft und eingebaut werden sollten. Das gilt für Encoder für Roland Fantom X6, ebenso wie für das LCD Display für Fantom X6 oder alle anderen Roland Ersatzteile. Wer hier Kompromisse eingeht, macht einen großen Fehler. Professionalität, die Sie auf der Bühne brauchen, ist auch für Ersatzteile unverzichtbar. Gleich, ob Sie einen Encoder für Roland Fantom X6 oder einen Taster für ihren Fantom kaufen möchten, ist die gleiche Profi-Qualität angebracht, als wenn ein Gerät komplett gekauft wird. Für alle Fragen sind wir gerne für Sie da. Klinkenbuchse Printmonage? Synthesizer Ersatzteil? Egal, was Sie benötigen: Wir beraten Sie kompetent, damit Ihre Lieblingsmusik wieder wie gewohnt klingen kann. Die Online-Bestellung erfolgt rasch und unkompliziert und auch rund um den Einbau der Ersatzteile sind wir immer Ihr leistungsstarker Ansprechpartner.

Filter products

Roland Fantom X6

Ersatzteile für Roland Fantom X6 einfach online bestellen

Keine Kompromisse bei der Qualität eingehen