Technics Organs

Synth-Parts

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .44*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

ALPS

Encoder 12 mm Technics short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsTechnics KN5000Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

Synth-Parts

Plastic grease for Technics Keyboards 30g

30 g can of plastic grease for Technics keyboardswe offer here a grease that is specially made for plastic parts.Especially for Technics keyboards we have collected very good experience.This plastic grease has good creep properties that are only partially desirable for a keyboard. Please apply only very sparingly so that the grease is not deposited on the felts.Not to be used for Fatar keyboards.For moving plastic parts.

€ 13 .49*

Visaton

2,36 inch speaker for Technics EAS-65PH31 NEW

1 pcs. New 2,36 inch highrange speaker, replacement for Technics EAS-65PH31suitable forTechnics E-PianosTechnics KeyboardsTechnics OrgansCone tweeter with special basked for the high-frequency range above 5000 Hz.Balanced frequency response with brilliant highs and high power handling.No separate high-frequency range housing construction necessary.Suitable as replacement unit for many HiFi speakers.

€ 26 .49*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuitHosiden HLJ7001-01-3010This part is used inRoland JP-8000Technics E-PianosTechnics Keyboards Technical descriptionThe offered phone jack for PCB mounting is a Stereo jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .78*

Technics

Pedal for Technics Organs

Pedal for Technics OrgansThis Pedal assembly is complete and ready to be installed. This module is used in many different Technics Organs.Used item, we do not accept any function guarantee for this !!!

€ 48 .99*

Technics

4,72 inch Speaker for Technics EAS-12P458 used

4,72 inch midrange speaker, Technics EAS-12P458A3 or EAS-12P458JB3Asuitable forTechnics E-PianosTechnics Keyboards

€ 14 .90*

Technics

5,51 inch Speaker for Technics EAS14PL used

5,51 inch lowrange speaker, Technics EAS14PL93A or EAS14PL11A3suitable forTechnics E-PianosTechnics Keyboards

€ 17 .34*

Technics

2,36 inch Speaker for Technics EAS-65PH31 used

2,36 inch highrange speaker, Technics EAS-65PH31A3 oder EAS-65PH31D3suitable forTechnics E-PianosTechnics Keyboards

€ 10 .76*

Visaton

4.32 inch Speaker for Technics EAS-12P458 NEW

4 inch midrange speaker, substitute für 4.32 inch Technics EAS-12P458A3 or EAS-12P458JB3ANEWsuitable forTechnics E-PianosTechnics KeyboardsPractical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 22 .90*

Technics

8 inch Speaker for Technics EAS-20PM used

1 pcs. 8 inch lowrange speaker, Technics EAS20PM223 or EAS20PM224suitable forTechnics E-PianosTechnics Organs

€ 24 .89*

Technics

12 inch Speaker for Technics EAS-30PL used

1 pcs. 12 inch lowrange speaker, Technics EAS-30PL109 or EAS-30PL122suitable forTechnics E-PianosTechnics Organs

€ 77 .35*

Visaton

12 inch Speaker for Technics EAS-30PL NEW

1 pcs. 12 inch lowrange speaker,new Replacement for Technics EAS-30PL109 or EAS-30PL122suitable forTechnics OrgansPractical tip:The speaker is mechanically fixed wirh nuts or screws. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 127 .00*

Visaton

8 inch Speaker for Technics EAS-20PM NEW

1 pcs. 8 inch lowrange speaker, neuReplacement forTechnics EAS20PM223 or EAS20PM224suitable forTechnics E-PianosTechnics OrgansPractical tip:The speaker is mechanically fixed wirh nuts or screws. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 53 .88*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .25*

Technics

Technics Screw XTW3+10T

1 pcs. Technics Tapping Screw XTW3+10T Keyboardscrew These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device. To avoid misunderstandings, we use the screw designations from the manual. Dimensions: 3 x 12,5mm ScreLocation: PCB in KeyboardXTW3+10T in Service Manual.

€ 0 .95*

Synth-Parts

Screw M2x10 VA

1 pcs. Screw M2x10 VADimensions: M2 x 10 mm

€ 0 .95*

Filter products

Technics Organs