Keyboard

Yamaha

Yamaha GH3 NL2 Stopper Upper 88, felt

1 pcs. Yamaha GH3/NL2 Stopper U88 V8468201This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. Old spare part no is: VU34210R

€ 34 .89*

Yamaha

Yamaha GH3 Stopper Lower88

1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards.

€ 27 .49*

Roland

Replacement parts for Roland PA4 and PA4A Keyboard

Ersatzteile Tastatur: Fulcrum 12P

Spare parts for Roland PA4 and PA4AKeyboardHere you will find different parts for Progressive Hammer Action Keyboard from Roland. These PA4 Keyboard was build by Roalnd in two different Versions. There exists a PA4 and a PA4A Version. The Parts i offer here fits for both Versions. Cusion, FeltHammerKey GuidePrice is valid for one spare part. Lower Cusion for Hammer in a Roalnd PA4 or Pa4A Keyboard (PArt-No: TTROPA4-ZU-FLTHA1)This Cussion is needed to stop hammer when falling down.Roland use here a material based on two different components.One side is self-adhesive.For a complette Keyboard wit 88 Keys you will need 2 of these cusionTTROPA4-ZU-FLTHA1.For all other Felt and Cusions you will need one part for a complete Keyboard.Please have a look at the video for replacing Hammers.

Variants from €1.49*

€ 17 .90*

Yamaha

Replacement Keys Yamaha GHD Keyboard

Taste: Key A

Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*

€ 8 .89*

Kawai

Kawai Sliptape, stripe for Wood Keys

Kawai Sliptape, stripeThis Sliptape is for old and new wood Keys.5 contiguous strips are delivered which are cut to size. This amount is enough for more than one keyboard. So you can also cut something.You will find here a Blog articel for this Item:Sticky key on Kawai E-Piano Practical Hint for Kawai Sliptape:When replacing the sliptapes on the wooden keys, you have to be extremely accurate and meticulous. Especially the removal of glue residues on the hammer heads is extremely important.

€ 43 .49*

Yamaha

Contactrubber GH3 for Yamaha

Contactrubber GH3 suitable for Yamaha This keyboard is used in these modells:Yamaha CVP-305Yamaha CVP-307For a complete Keybord with 88 keys you will need this quantity on contactrubber:1 x 5P6 x 12P1 x 11P

€ 13 .19*

Synth-Parts

Piano felt for Kawai Sliptape replacement

1 pcs. Piano felt as alternative to Kawai sliptapeOur alternative for the sliptape used by Kawai for wooden keys.Our alternative to the slip tape used by Kawai for wooden keys.Piano felt, an old and proven product from piano making. This piano felt is used by every piano maker exactly where mechanical resilience is required. Where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as silently as possible.In the Kawai digital pianos in which wooden keys are used is exactly such a mechanical load given from Kawai with a so-called Sliptape is padded. This piano felt here is best suited to replace the Kawai sliptape.Compared to the original Kawai Sliptape, the key pressure on this felt is very slightly more sluggish. However, this should improve with use as the felt becomes smoother with use.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing pasteThe felt strip supplied is more than sufficient for one keyboard with 88 keys.

€ 36 .00*

KORG

Korg LS-88 Keyboard spring KOC-C50231

1 piece Korg LS-88 Keyboard spring KOC-C50231

€ 5 .81*

Kawai

Kawai RH88B PWB Assy KKB-044(2)

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040.The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CS4Kawai CN24Kawai CN25Kawai CN27Kawai CN29Kawai CN34Kawai CN35Kawai CN37Kawai CN39Kawai ES7Kawai ES8Kawai ES920Kawai MP7Kawai MP7SEClavia Nord Grand

€ 164 .99*

KORG

Contact rubber 12P for RH4 Keyboard

Contact rubber 12 points for RH4 Keyboard Contact high: 7,5 mmStrip bright: 22,3 mmStrip length: 165 mmNumber of contacts: 12Roland Part Number: 4671145A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 88 keys 7 contact strip + 4 pins are needed. The remaining 4 contacts can be easily separated from a rubber contact strip with 12 contacts. A notch is provided in the rubber contact strip after every four contacts for this purpose.

€ 10 .79*

Fatar

Contact rubber for Fatar Keyboards

Kontaktgummi: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Fatar

Fatar Keyboard tripple Contact rubber 13P new

Kontaktgummi: 13 Contacts

1 pcs. Fatar Keyboard tripple Contact rubber 13P new technichal dimensionsNo of contacts: 13Width: 22.7 mmheigh: 6.5 mmColor: white or grey

€ 13 .95*

Yamaha

Yamaha GH3 Actuate Rubber

1 pcs. Yamaha GH3 Actuate RubberThis rubber fits in these keyboardsYamaha GHDYamaha GH3Yamaha NL2This rubber is used on every single key as stopperColor: black

€ 2 .08*

Yamaha

Contactrubber for Yamaha 16NW Keyboard

Kontaktgummi: 12 Contacts

1 pcs. new Contactrubber for Yamaha 16NW KeyboardThis keyboard is used in these modells:Yamaha MOX6Yamaha Tyros 1Color of these Contactrubber may be different.

€ 11 .31*

Synth-Parts

Hammer Felt 2 for Technics E-Piano Keyboard

Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.

€ 10 .48*

Synth-Parts

Hammer Felt 1 for Technics E-Piano Keyboard

1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*

KORG

Korg RH3 Keyboard Spring

1 pcs Korg RH3 Keyboard Spring

€ 4 .17*

KORG

Replacement keys for RH3 Keyboard, ivory

Taste: Key A

Replacement Keys for RH3 KeyboardRH3 keyboard is used inKorg Kronos 73Korg Kronos 88KorgSP-250Korg SV-1 Color: cream white (Ivory)The RealHammer 3 keyboard (RH3) is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

Variants from €7.90*

€ 9 .89*

Yamaha

Yamaha Keyboard grease, blue 50g

Yamaha Spezial Keyboard grease, Blue 50gOriginal Yamaha plastic grease for Keyboards. Color is blue and will be delivered in a 50 gramm portion.Molycote G-1066YThis grease is used on YamahaOn GHD and GH3 keyboards on the fulcrum - Where the key engages the frame.For pedals at the mechanical moving parts.

€ 35 .50*

Yamaha

Contactrubber 16M CT2M for Yamaha

Kontaktgummi: 12 Contacts

1 pcs. Contactrubber 16M CT2M suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-270Yamaha PSR-340Yamaha PSR-640Yamaha PSR-740Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S750Yamaha PSR-S770Yamaha PSR-S900Yamaha PSR-S910Yamaha PSR-S950Yamaha PSR-S970Yamaha PSR-1500Yamaha PSR-2000Yamaha PSR-3000These Contactrubber was buildt in two different colors. Function is in both cases the same.

€ 11 .90*

Roland

Roland SK3 Rubbercontact 12P x1

1 pc. Contact rubber for old Roland keyboard Features: Height of contacts: 8 mm width of the strip: 16 mm Length of the strip: 162 mm Number of contacts per strip: 12 contactsOne contact strip consists of 12 contacts and thus covers one octave.This contact rubber has a notch to allow the contact rubber to be split. The division occurs with 7/5 contacts

€ 13 .90*

Kawai

Contact rubber Kawai RH88A

1 pcs. Contact rubber for Kawai KeyboardFeatures:Height of contacts: 11 mmWidth of the strip: 25 mmLength of the strip: 164 mmNumber of contacts per strip: 12Note on replacing the RH88A contact rubbers:Please always replace all contact rubbers in the keyboard.A new contact rubber has better playing dynamics than a contact rubber that is 8 or 10 years old. If you replace only one contact rubber, you will notice differences in the playing dynamics.A contact rubber consists of 12 contacts and covers an octave. A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 18 .90*

KORG

Contact rubber 12P for RH3 Keyboard

1 piece Contact rubber 12 points for RH3 KeyboardContact high: 7,5 mmStrip bright: 22,3 mmStrip length: 165 mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 88 keys 7 contact strip + 4 pins are needed. The remaining 4 contacts can be easily separated from a rubber contact strip with 12 contacts. A notch is provided in the rubber contact strip after every four contacts for this purpose.

€ 10 .79*

Kawai

Contact rubber Kawai RG88B

1 pcs. Contact rubber for Kawai KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high: 11 mmStrip bright: 25 mmStrip length: 164 mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 15 .90*

Spare parts for keyboards

We offer a wide range of spare parts for the keyboards of your electric pianos, synthesizers and keyboards.
From contact rubber to connecting cables for keyboards, from hammers for electric pianos to springs for synthesizer keyboards to keyboard felts and contact strips, we have the spare parts you need to repair or maintain your device.
Especially the expensive, valuable devices need some affection from time to time. For example, you should grease the keyboard every now and then to prevent the occurrence of annoying noise.

Ordering spare parts and consumables online

You have the possibility to order spare parts and consumables for the repair of your keyboards, electric pianos and synthesizer onlien.
The dispatch takes place three times a week, so that you have the desired articles promptly with you. This is particularly interesting for dealers and repair shops, as it allows them to offer their customers short waiting times. On special request, we can also ship on other days. Simply get in touch with us. We will be happy to advise you and accommodate your wishes and requirements.

In-house repair

If you are unable to repair your instrument yourself, you can always have it delivered to our workshop. This can be arranged by you personally, or by sending the instrument to us via the usual shipping service providers.
In our specialist workshop, we devote the necessary attention to your instruments and use the required special tools and measuring equipment.
Well-trained specialists make every effort to repair and/or service your device promptly and in compliance with applicable regulations, such as the specifications for the disposal of batteries.
Make an appointment.

Filter products

Keyboard

Spare parts for keyboards

Ordering spare parts and consumables online

In-house repair