Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Kurzweil K2000

tactile switch 7,3 mm
ALPS
tactile switch 7,3 mm
1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .93*
Contact rubber for Fatar Keyboards
Fatar
Contact rubber for Fatar Keyboards
Rubbercontact: 12 Contacts
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!!   Not for use in Roland Instruments    !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*
€ 10 .95*
1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
E-Switch
1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*
Kurzweil K2000 LCD Display black with cable Kit NEW
Synth-Parts
Kurzweil K2000 LCD Display black with cable Kit NEW
Black LCD Display with LED Backlight replacement including cable Kit forKurzweil K2000Kurzweil K2000rKurzweil K2000 VX We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Synth-Parts
LCD Display blue with cable Kit for Kurzweil K2000
1 pcs blue LCD Display with LED Backlight replacement including cable Kit forKurzweil K2000Kurzweil K2000rKurzweil K2000 VX We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes on installation:The instrument must be almost completely disassembled to access the display. Please do not underestimate the amount of work that is necessary. This work should only be carried out by people with technical, preferably electrotechnical, experience.The installation itself can be done without any soldering skills, but: We recommend to take out of function circuit part for the old backlight foil. For this, a transistor and a capacitor must be removed. This can also be done with a side cutter, i.e. without soldering. 

€ 99 .00*
Kurzweil K2000 VOL-DATA ASSY NEU
Synth-Parts
Kurzweil K2000 VOL-DATA ASSY NEU
1 pcs. Kurzweil K2000 VOL/DATA Assembly NEWKurzweil K2000There is a difference to original volume slider: The original volume slider has a logarithmic characteristic, here a linear characteristic was used for the volume slider.This completely assembled and mounted PCB is manufactured by ReBach from the Netherlands and is a 1: 1 replica of the original Kurzweil board. 

€ 34 .00*
Parts for Fatar Keyboards TP7/8/9
Fatar
Parts for Fatar Keyboards TP7/8/9
Parts Keyboard: Keyguide black
Parts for Fatar KeyboardsThese parts fits forFatar TP/7SFatar TP/8SFatar TP/9SHere you will find springs, felts, P.C.B., screws

Variants from €0.60*
€ 3 .49*
Replacement keys for Fatar TP/9 Keyboard, weighted
Fatar
Replacement keys for Fatar TP/9 Keyboard, weighted
Key: Key A
Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

Variants from €5.70*
€ 8 .90*
Synth-Parts
Kurzweil K2000 LCD Display yellow with cable Kit
1 pcs yellow LCD Display with LED Backlight replacement including cable Kit forKurzweil K2000Kurzweil K2000rKurzweil K2000 VX We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  Yellow BackgroundDelivery scope of Display set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes on installation of LCD Display in Kurzweil K2000:The instrument must be almost completely disassembled to access the display. Please do not underestimate the amount of work that is necessary. This work should only be carried out by people with technical, preferably electrotechnical, experience.The installation itself can be done without any soldering skills, but: We recommend to take out of function circuit part for the old backlight foil. For this, a transistor and a capacitor must be removed. This can also be done with a side cutter, i.e. without soldering. 

€ 99 .00*
Synth-Parts
Kurzweil K2000 LCD Display white with cable Kit
1 pcs yellow LCD Display with LED Backlight replacement including cable Kit forKurzweil K2000Kurzweil K2000rKurzweil K2000 VX We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  white BackgroundDelivery scope of Display set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes on installation of LCD Display in Kurzweil K2000:The instrument must be almost completely disassembled to access the display. Please do not underestimate the amount of work that is necessary. This work should only be carried out by people with technical, preferably electrotechnical, experience.The installation itself can be done without any soldering skills, but: We recommend to take out of function circuit part for the old backlight foil. For this, a transistor and a capacitor must be removed. This can also be done with a side cutter, i.e. without soldering. 

€ 99 .00*

Kurzweil K2000 Maintenance and Spare Parts

The Kurzweil K2000 is a highly regarded instrument among musicians and producers, known for its advanced synthesis capabilities and robust build quality. To ensure its optimal performance, proper maintenance and access to high-quality keyboard spare parts are essential.

Essential Spare Parts for Your Kurzweil K2000

Over time, components of the Kurzweil K2000 may require replacement due to wear and tear. High-demand stage piano spare parts include replacement keys, sensor boards, and keybed parts. These parts are crucial for maintaining the instrument's playability and responsiveness.

Internal Components and Upgrades

Internal components such as the contact rubber, potentiometer, encoder, and tactile switch are integral to the functionality of the K2000. Replacing these parts with high-quality OEM spare parts can restore the instrument's original performance.

Display and Circuitry Solutions

The display of the Kurzweil K2000 can be upgraded or replaced for better visibility and reliability. Options include LCD display replacement or an OLED display upgrade. For issues related to the instrument's circuitry, PCB repair services are available to address and resolve complex electronic problems.

End-of-Life and Professional Repair Services

For discontinued or hard-to-find components, EOL spare parts provide a solution for extending the life of your instrument. Engaging a professional repair service ensures that your Kurzweil K2000 receives expert care and attention, preserving its value and functionality for years to come.

By utilizing the right spare parts and services, you can maintain the exceptional performance of your Kurzweil K2000, ensuring it continues to inspire your musical creativity.