Kawai MP4

Panasonic

tactile switch 5 mm for Kawai

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

1 pcs. Kawai Holder Score Stand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

€ 9 .59*

Kawai

Contact rubber Kawai RG88B

1 pcs. Contact rubber for Kawai KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high: 11 mmStrip bright: 25 mmStrip length: 164 mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 15 .90*

Kawai

Kawai Sliptape, prepunched 100 pcs.

1 Set. Kawai Sliptape, prepunchedSet with 100 pcs.Size of a sliptape section: 4x12 mm.For old keyboards, the sliptape should be placed in the center because the sliptapes used in earlier times has been larger.This pre-cut sliptape fits only for hammer in plastic keyboards. Do not use this Sliptape in Kawai Wood Keyboards.

€ 43 .49*

Synth-Parts

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

€ 1 .99*

Kawai

Kawai Volume Slider Knob for MP Stage Serie

1 pcs. Kawai Volume Slider KnobKawai MP-8Kawai MP-11 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

€ 11 .07*

Kawai

Kawai Round Knob for Stage Serie

1 pcs. Kawai Round KnobKawai MP-8Kawai MP-7Kawai MP7SEKawai MP-11Technical Description of Kawai Knob:This Round knob will be put on rotary potentiometer on your Kawai Stage Pianos

€ 11 .07*

ALPS

Kawai Volume Slider 30mm Travel

1 pcs. Kawai Volume Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Kawai

KAWAI RG88B Replacement keys for Keyboard

Keys: Key C

Replacement keys for KAWAI Keyboard RG-88Bsuitable forKawai CN14Kawai ES6Kawai ES100The Kawai RG88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RG88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88

€ 16 .89*

Kawai

Kawai Button for Stage Serie Small

1 pcs. Kawai Button Duo Small 11 x 8 mmKawai ES-7Kawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 11 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .07*

Kawai

Kawai RG88B PWB Assy KKB-015

1 pcs. Service Kit Kawai RG88B PWB Assy KKB-015This service kit replaces the circuit boards and contact rubbers in the Kawai RG88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.This set of boards replaces the board KKB-015 The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai KDP-80Kawai KDP-90Kawai ES100Kawai CN31Kawai CN32Kawai CL-15

€ 164 .99*

Kawai

Kawai Potentiometer for Pitch Bend VQ764300

1 pcs. Kawai Rotary Potentiometer for pitch bendThis poti is used in

€ 13 .90*

Kawai

Kawai Potentiometer for Modulation

1 pcs. Kawai Rotary Potentiometer for Modulation

€ 13 .78*

ALPS

Kawai Value Slider 30mm Travel

1 pcs. Kawai Value Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Synth-Parts

Kawai Rotary Poti vertikal Real Time Control

1 pcs. Kawai Rotary Poti vertikal Real Time Control Electrical properties:The nominal resistance is 10 kOhm. The original potentiometer from Kawai has a resistance value of 20 kOhm. Since this potentiometer is used as a voltage divider, the resistance value is not decisive.Appearance (technical characterisation):The casing measures 11 x 11 mm, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin. Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .95*

Kawai MP4 Spare Parts and Repair Solutions

The Kawai MP4 is a well-regarded stage piano, known for its exceptional sound quality and robust build. Over time, however, even the most durable instruments may require maintenance or part replacements to maintain their optimal performance. Here, we explore the available e-piano spare parts and professional repair solutions for the Kawai MP4.

Key Components for Maintenance

To ensure the Kawai MP4 remains in top condition, various stage piano spare parts are available. These include replacement keys, keybed parts, and contact rubber, which are essential for addressing wear and tear in the key action mechanism. Additionally, hammer action parts can be replaced to restore the piano's original touch and feel.

Electronics and Display Upgrades

For the electronic components of the Kawai MP4, spare parts such as potentiometers, tactile switches, and circuit boards are crucial for repairing or enhancing functionality. Furthermore, display upgrades like an OLED display upgrade or an LCD display replacement can significantly improve the user interface and visual clarity of the instrument.

Structural and Acoustic Enhancements

Maintaining the structural integrity and acoustic quality of the Kawai MP4 involves using parts like felt and Sliptape. These components are vital for dampening noise and ensuring smooth operation of the piano's moving parts.

Comprehensive Repair Services

For more complex issues, professional repair services are recommended. These services can address advanced needs such as PCB repair and the replacement of OEM spare parts. Additionally, sourcing EOL spare parts ensures that even discontinued components can be replaced effectively.

In conclusion, maintaining the Kawai MP4 involves a combination of quality spare parts and expert repair services. Whether you require specific components or comprehensive support, the availability of these resources ensures that your stage piano continues to deliver exceptional performance for years to come.

Filter products

Kawai MP4

Kawai MP4 Spare Parts and Repair Solutions

Key Components for Maintenance

Electronics and Display Upgrades

Structural and Acoustic Enhancements

Comprehensive Repair Services