Fatar Keyboards

Fatar

Contact rubber for Fatar Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Fatar

Fatar Keyboard tripple Contact rubber 13P new

Rubbercontact: 13 Contacts

1 pcs. Fatar Keyboard tripple Contact rubber 13P new technichal dimensionsNo of contacts: 13Width: 22.7 mmheigh: 6.5 mmColor: white or grey

€ 13 .95*

Synth-Parts

Silicon grease for Fatar Keyboards 20g

20 g tube of silicon grease for Fatar keyboardswe offer here a silicon grease that is working good on Fatar Keyboards.For moving plastic parts.

€ 9 .95*

Fatar

Fatar TP100 lower hammer stop felt

Fatar TP100 lower hammer stop felt..This felt is used by Fatar in the TP100 keyboard and dampens the hammers when they return to their resting position after a key is released.In the drawing, the felt marked in red (memory foam).This felt consists of several layers of different materials.For easier installation, this felt is equipped with adhesive tape.

€ 30 .46*

Fatar

Replacement keys and parts for Fatar TP/7 Keyboard

Key: Key A

Replacement keys and spare parts for Fatar TP/7 Keyboard Fatar TP/9 keyboard is a touch sensitive keyboard with unweighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 14,5 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is not worked out. The distance from the front side of the key is 9,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

Variants from €2.75*

€ 9 .29*

Fatar

Replacement keys and parts for Fatar TP/8S Keyboard

Key: Key A

Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedWe would like to expressly point out that the keys are used. Fatar keys tend to darken and yellow significantly. Under certain circumstances, it may be that we currently only have very darkened keys in stock.Fatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

€ 9 .75*

Fatar

Parts for Fatar Keyboards TP7/8/9

Parts Keyboard: Keyguide black

Parts for Fatar KeyboardsThese parts fits forFatar TP/7SFatar TP/8SFatar TP/9SHere you will find springs, felts, P.C.B., screws

Variants from €0.60*

€ 3 .49*

Fatar

Replacement keys, weighted for Fatar TP/8+ Keyboard

Key: Key A

Replacement keys, weighted for Fatar TP/8+ KeyboardFatar TP/8+ keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

€ 13 .90*

Fatar

Fatar TP40 keybed felt

Fatar TP40 Keybed FeltThis felt is used by Fatar in the TP40 keyboard and dampens the keys when they return to their resting position after being released.In the drawing, the felt is marked in red (felt strip).This felt consists of several layers of different materials.For easier installation, this felt is equipped with adhesive tape.

€ 30 .46*

Fatar

Keys for Fatar TP10 weighted

Key: Key A

Replacement keys for Fatar TP10 weigthed Keyboard Fatar TP10 ABS weighted keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Variants from €0.86*

€ 11 .57*

Fatar

Parts for Fatar Keyboards TP/40

Parts Keyboard: Keyguide black

Parts for Fatar KeyboardsThese parts fits forFatar TP/40 Here you will find springs, felts, P.C.B., screws

Variants from €1.83*

€ 2 .19*

Fatar

Replacement keys for Fatar TP10 ABS Keyboard

Key: Key A

Replacement keys for Fatar TP10 ABS Keyboard Fatar TP10 ABS keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

€ 10 .71*

Fatar

Parts for Fatar TP10 Keyboards

Parts Keyboard: Fulcrum 4P

Parts for Fatar TP10 KeyboardsHere you will find springs, felts, P.C.B., screws

Variants from €1.19*

€ 13 .98*

Fatar

Fatar TP/8P Keyboard, Replacement keys semi weighted ivory

Keys: Key C

Fatar TP/8P Keyboard, Replacement keys semi weighted ivory Fatar TP/8P keyboard is a touch sensitive Pianokeyboard with semi weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The semi weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 11 mm. The distance from the front side of the key is 12,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

€ 11 .50*

Roland

Contact rubber for Fatar (Roland) Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Fatar Keyboards build in in Roland Key InstrumentsRoland used in different Instruments Keyboards from Manufacturer Fatar. In this Keyboards are build in Contact rubber that is different to normal Fatar Contact Rubber.These Contact Rubber fits only in Fatar Keyboards used in Roland Instruments:Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP10 MDRFatar TP10 ABSFatar TP40technichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white

Variants from €8.33*

€ 16 .10*

Fatar

Hammer for Fatar TP10 Keyboards

Hammer: Hammer black key

Hammer for Fatar TP10 KeyboardsFatar Keyboards are used by Korg, Clavia Nord, Kurzweil, GEM

€ 7 .39*

Fatar

Hammer for TP40GH Keyboard

Hammer: Hammer Zone 1 black key

Replacement Hammer for TP40GH KeyboardThe TP40 GH (graded hammer action) keyboard is a 3 zone hammer mechanism.

€ 9 .48*

Fatar

Replacement keys for Fatar TP/9 Keyboard, weighted

Key: Key A

Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

Variants from €5.70*

€ 8 .90*

Fatar

Replacement keys, weighted for Fatar TP10 pressure point

Key: Key A

Replacement keys, weighted for Fatar TP10 Keyboard with pressure point Fatar TP10 keyboard is a touch sensitive keyboard with Hammer Action. The weighted Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The weighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Variants from €10.90*

€ 16 .90*

Fatar

Replacement keys for Fatar TP40 GH Keyboard

Key: Key A

Replacement keys for Fatar TP40 GH Keyboard (used) Fatar TP40 GH keyboard is a touch sensitive keyboard with 3 Zone Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The unweighted keys have a length of 21.5 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 1.2 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. A movable hook is hooked into this opening. 3-Zone Hammer Mechanics:A 3-zone hammer mechanism is a little bit unusal for high-quality e-piano keyboards. Normaly there will bee 4 zone hammer mechanism. By means of the three different zones the Manufacturer Fatar try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are three different hammers with different weight.The keys are in color white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle. At the moment we have used keys in a very good condition.These keyboards are placed in the products of Doepfer (well known for their Master Keyboards and modular Synthesizer) and Waldorf.

Variants from €10.38*

€ 11 .57*

Fatar

Replacement keys for Fatar TP/30 Keyboard

Key: Key A

Replacement keys for Fatar TP/30 Keyboard Fatar TP/30 keyboard is a touch sensitive keyboard with Hammer Action. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine. contact detection is done via 12 pin contact rubber strip with two graphite points.The unweighted keys have a length of 21.4 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

€ 9 .59*

Fatar

Replacement keys for Fatar TP/9P Keyboard

Key: Key A

Replacement keys for Fatar TP/9P E-Piano Keyboardused inRoland A-30Roland A-33Roland A-37 Fatar TP/9P keyboard is a touch sensitive keyboard. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm.The contactor, which presses on the contact strip is 1.9 cm deep. The distance between the front contact and the front of the keyboard is 10,5 cm. The keys are in color cream white.Comment:We know three different Version of this Keyboard: TP/9S, TP/9P and TP/9+. Please have a exact look at the pictures. The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Variants from €6.85*

€ 9 .90*

Fatar

Parts for Fatar Keyboards TP/100LR

Parts Keyboard: Keyguide black

Parts for Fatar KeyboardsThese parts fits forFatar TP/100LR Here you will find springs, felts, P.C.B., screws

Variants from €4.90*

€ 9 .52*

Fatar

Replacement keys for Fatar TP/9S Keyboard, unweighted

Key: Key A

1 pcs. Replacement keys for Fatar TP/9S Keyboard ,unweightedFatar TP/9S keyboard is a touch sensitive keyboard with unweighted keys. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points. The unweighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked. The keys are in color cream white.

€ 8 .90*

Fatar Keyboards

Filter products

Fatar Keyboards