Nord Stage Series

Nord

Clavia Nord Knob

1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .45*

Nord

Clavia Nord Knob with line 6 mm

1 pcs. Clavia Nord Knob with line 6 mmPraktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .45*

Fatar

Contact rubber for Fatar Keyboards

Rubbercontact: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Nord

Clavia Nord Volume Dreh Potentiometer

1 pcs. Clavia Nord Volume Dreh Potentiometer Electrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 16 mm Diameter, the total length without pins is 32 mm. In this total length the casing is 9 mm long. On this casing is the thread with 7 mm length connected and out of the thread the axis rises with 15 mm length. The axis has a diameter of 4 mm and is flattened on a length of 12 mm. It is made of metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 15 .90*

Synth-Parts

1 pcs. tactile switch 13 mm Nord Black

1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 5 .99*

Nord

Clavia Nord Housing Screw 16 mm Black Phillips

1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.

€ 1 .69*

Nord

Clavia Nord Housing Screw 6 mm Black Phillips

1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

€ 1 .44*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo for PCB

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phonejack is used by Nord often for Headphone output and also for Right / LEft Line out. (This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .25*

Nord

Nord Pedal Spring

1 pcs. Nord Pedal SpringOn this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.

€ 7 .95*

Synth-Parts

PP Capacitor 4.7 nF Safety

1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters

€ 1 .99*

Nord

Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch PCB

1 pcs Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phone jack is used by Clavia Nord Instruments often for Sustain Pedal.(This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .75*

ALPS

Nord Encoder 12 mm for Nord Elektro

1 pcs. Encoder 12 mm suitable for different Nord models Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .84*

Synth-Parts

Clavia Nord OLED Display new white

1 pcs.Clavia Nord OLED Display new white this is a plug in ready Display replacement for Claiva Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 54 .99*

Synth-Parts

Clavia Nord OLED Display with Frame new white

1 pcs.Clavia Nord OLED Display with Frame new white this is a plug in ready Display replacement for Clavia Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.This display is clipped onto the circuit board with the frame. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 74 .90*

Nord

Clavia Nord Knob with line 4 mm

1 pcs. Clavia Nord Knob with line 4 mmThis control knob fits on a 4 mm D-axis. Nord used these knobs on older models. Especially for the volume potentiometer.Praktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .75*

Nord

Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB

1 pcs. Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is often used on Clavia Nord instruments for the control pedal and rotor pedal. (This information is without guarantee - please have a look on pinlayout of the phone jack. The pin layout of phone jack is unique.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .45*

Nord

Clavia Nord Pitch Stick long cable

1 pcs. Clavia Nord Pitch Stick long cable

€ 108 .99*

Nord

Nord Encoder 22 mm for Nord Stage 2 with Detent

1 pcs. Nord Encoder 22 mm for Nord Stage 2 with DetentOriginal Nord spare part. - Only the encoder with detent is still available for the Stage 2. The encoder without detent is no longer available. Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 18 .45*

Nord

Nord LED lens, 6 arrows

Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 8 .16*

Nord

Nord LED lens surround 6

1 pcs Nord LED lens surround 6 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic.

€ 7 .14*

Synth-Parts

Encoder 22 mm for Nord without Detent

1 pcs. Encoder 22 mm without Detent suitable forNord Modular G2 - Secondary Dial Master Clock -> Patch LevelPractical advice:The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small deviations in design:Pin distance here is 2.5 mm compared to 5 mm for the originalOriginal encoder does not have an "anti-rotation pin". This anti-rotation pin must be cut off at the new encoder.Mounting clip is not needed in many cases at Nord and can be removed. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .71*

Synth-Parts

1 pcs. tactile switch 13 mm Nord light gray

€ 6 .45*

Nord

Clavia Nord Knob Encoder

1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed.

€ 7 .95*

Nord

Clavia Nord 4 way Power Supply IEC14 V1.3

1 pcs. Clavia Nord 4 way Power Supply IEC14 V1.3 brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 10-pole ribbon cableThis Power supply deliver:+ 3.3 Volt+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge.

€ 219 .00*

Filter products

Nord Stage Series