connectors and cable

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Jalco

YKB21-5078 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5078HLJ-2305HTJ-064-16DThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .34*

Synth-Parts

Phone Jack 1/4 inch for printed circuits Mono

1 pcs. Phone Jack 1/4 inch, Mono for printed circuitSpecification:MonoThread: UNF 7/16 InchHousing: PlasticThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .99*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Synth-Parts

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .44*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

Kawai Pedalcable No1

Kawai Pedalcable No1This cable with plug is used by Kawai for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 5 Pol Mini Din Plug

€ 26 .49*

Synth-Parts

Technics Pedalcable No2

1 pcs. Technics Pedalcable No2Pedal cable (2 meter) with plug used by Technics E-Piano models.Technics PC26Technics PR305Technics PR307Technics PR336Technics PR54Technics PR602Technics PR700Technics PR702Technics PR604Technics PR804Technics PR900Technics PR902Technics PR1000Technics PX201Technics PX203Technics PX207Technics PX224Technics PX332Technics PX336Technics PX662Technics PX663Technics PX664This cable is also used on other Technics E-Piano modell but the pin assignment differs.The cable fits variants with 3 pedals and has a 4 pol mini Din plug.Handcrafted faithfully reproduction made by Synth-Parts

€ 38 .50*

Yamaha

Yamaha Pedalcable No1

1 pcs. Yamaha Pedalcable No1This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. 5 wires are assigned on both sides.This cable is used inYamaha CLP-440

€ 22 .90*

Hosiden

HLJ0544 Phone Jack 1/4 - 6.3 mm PCB Stereo ,Iron frame

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo, for printed circuit with Iron FrameThe item is the same asHLJ 0544-01-010Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating.Praktikal tip:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .99*

Yamaha

Yamaha Pedalcable No3

1 pcs. Yamaha Pedalcable No3This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. All 6 wires are assigned on both sides.This cable is used in:Yamaha CLP-745Yamaha CLP-810SYamaha CLP-840Yamaha CLP-860Yamaha CLP-990Old Manufacturer Number: V0044700

€ 22 .90*

Yamaha

Yamaha MIDI cable for Reface CP

1 pcs. Yamaha MIDI cable forYamaha Reface DXYamaha Reface CPthis is a special MIDI cable for Yamaha Reface CP Synthesizer. Because of small housing Yamaha used here a MINI DIN plug.Adapter cable: The cable is provided with a MINI DIN plug on the side to the synthesizer from which the two usual 5-pin DIN sockets are then led out.

€ 14 .95*

Yamaha

Yamaha Pedalcable No2

1 pcs. Yamaha Pedalcable No2This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. Only 5 wires are used.This cable is used withYamaha YDP-144

€ 22 .90*

Jalco

YKB21-5076 - Phone Jack 1/4- 6.3 mm PCB Mono

1 pcs. Phone Jack 1/4 inch - 6.3 mm, Mono witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5076HLJ-2305-01-3030These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .25*

Yamaha

Yamaha Tyros Systemcable to Subwoofer

1 pcs. Yamaha Tyros Systemcable to SubwooferThis cable connects your Tyros with Subwoofer GNS MS01

€ 26 .42*

Yamaha

Yamaha Tyros Speaker Cable

1 pcs. Yamaha Tyros Speaker CableThis is a very short cable for direct connection from your Tyros to Speaker on Speaker Stand

€ 20 .83*

Jalco

Phone Jack 1/8- 3.5 mm for printed circuits Stereo,YKB21-5344

1 pcs. Phone Jack 1/8 inch - 3.5 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha InstrumentsJalco phone jack YKB21-5344This phonejack is a stereo jack socket with 9 solder legs. In addition to the signal contacts for stereo signal transmission, this jack has 2 switching contacts that are designed as change switch. These jack sockets are basically downwards compatible. For example, this 9-pin socket can also be used for the 7-pin version. To do this, it is sufficient to cut the two extra soldering legs.Furthermore, there are two plastic noses on the underside, which are intended as a guide and holding tiller. These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 3 .99*

Jalco

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .81*

Nord

Nord Phone Jack 1/4 - 6.3 mm for printed circuits Stereo

Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .25*

Nord

Phone Jack 1/4 - 6.3 mm for printed circuits Stereo with one Switch

1 pcs. Phone Jack 1/4- 6.3 mm, stereo witch one Switch, for printed circuit used by E-mu E4KE-mu E-SynthE-Mu E4 XTE-Mu e6400Technical description:The offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .84*

Synth-Parts

Kunming Phone Jack 1/4 - 6.3 mm PCB Stereo ,Iron frame

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo, for printed circuit with Iron FrameThe item is the same asKunming HTJ-064Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating.Practical tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .38*

Synth-Parts

Yamaha CVP-209 Series FFC cable LCD to DM 500 mm

1 pcs. FFC cable for Yamaha CVP-209 500 mm length Length = 500 mmPitch= 0,5 mmBoth sides have the same connectorThis cable is used to connect LCD Display with Mainboard inYamaha CVP-207Yamaha CVP-209Yamaha CVP-900The LCD display in the Yamaha Clavinova has vertical stripes in the display?Do you have vertical stripes in the LCD display of your electric piano? These are lines that run from top to bottom through the display and do not belong in the picture.An exchange of this FFC cable can achieve an improvement. In the best case, the vertical stripes are then completely gone.

€ 9 .97*

Synth-Parts

FFC socket 26 pin, 1.25 mm pitch right angel

1 pcs. 26 pin FFC socket with 1.25 mm pitch right angel26 pintop contact sidePitch: 1.25 mmThis FFC Socket is used in Roland JD-800. This is located on small PCB under Keyboard

€ 0 .94*

connectors and cable

Filter products

connectors and cable