Kawai

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Panasonic

tactile switch 5 mm for Kawai

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Kawai

Kawai Sliptape, stripe for Wood Keys

Kawai Sliptape, stripeThis Sliptape is for old and new wood Keys.8 contiguous strips are delivered which are cut to size. This amount is enough for more than one keyboard. So you can also cut something.You will find here a Blog articel for this Item:Sticky key on Kawai E-Piano Practical Hint for Kawai Sliptape:When replacing the sliptapes on the wooden keys, you have to be extremely accurate and meticulous. Especially the removal of glue residues on the hammer heads is extremely important.

€ 43 .49*

Synth-Parts

Piano felt for Kawai Sliptape replacement

1 pcs. Piano felt as alternative to Kawai sliptapeOur alternative for the sliptape used by Kawai for wooden keys.Our alternative to the slip tape used by Kawai for wooden keys.Piano felt, an old and proven product from piano making. This piano felt is used by every piano maker exactly where mechanical resilience is required. Where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as silently as possible.In the Kawai digital pianos in which wooden keys are used is exactly such a mechanical load given from Kawai with a so-called Sliptape is padded. This piano felt here is best suited to replace the Kawai sliptape.Compared to the original Kawai Sliptape, the key pressure on this felt is very slightly more sluggish. However, this should improve with use as the felt becomes smoother with use.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing pasteThe felt strip supplied is more than sufficient for one keyboard with 88 keys.

€ 36 .00*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Kawai

Kawai RH88B PWB Assy KKB-044(2)

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040.The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CS4Kawai CN24Kawai CN25Kawai CN27Kawai CN29Kawai CN34Kawai CN35Kawai CN37Kawai CN39Kawai ES7Kawai ES8Kawai ES920Kawai MP7Kawai MP7SEClavia Nord Grand

€ 164 .99*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

1 pcs. Kawai Holder Score Stand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

€ 9 .59*

Kawai

Contact rubber Kawai RH88A

1 pcs. Contact rubber for Kawai KeyboardFeatures:Height of contacts: 11 mmWidth of the strip: 25 mmLength of the strip: 164 mmNumber of contacts per strip: 12Note on replacing the RH88A contact rubbers:Please always replace all contact rubbers in the keyboard.A new contact rubber has better playing dynamics than a contact rubber that is 8 or 10 years old. If you replace only one contact rubber, you will notice differences in the playing dynamics.A contact rubber consists of 12 contacts and covers an octave. A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 18 .90*

E-Switch

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Synth-Parts

SMK LGP6531-0800F DC Power Jack with solder pins for PCB

1 pcs. SMK LGP6531-0800F DC Power Jack with solder pins for PCBtechnical Dates of LGP6531-0800F:Termination Solder PinOuter Diameter: 5.9 mmInner Diameter: 3 mmInner Contact: 1.05 mmDC-Socket LGP6531-0800F and LGP6531-1500f are nearly same. LGP6531-0800f is a little bit better with electrical contact.Mechanical Description of LGP6531-0800F and LGP6531-1500F:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 14 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .25*

Kawai

Kawai Pedalcable No1

Kawai Pedalcable No1This cable with plug is used by Kawai for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 5 Pol Mini Din Plug

€ 26 .49*

Kawai

Kawai DC Power Jack 3.5 mm with solder pins

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES4Kawai ES6Kawai ES7Kawai ES8Kawai ES520This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 7 mmInner diameter: 3.5 mmInnercontact: 1.5 mmMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 18 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 9 .22*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Jalco

Phone Jack 1/8- 3.5 mm for printed circuits Stereo,YKB21-5344

1 pcs. Phone Jack 1/8 inch - 3.5 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha InstrumentsJalco phone jack YKB21-5344This phonejack is a stereo jack socket with 9 solder legs. In addition to the signal contacts for stereo signal transmission, this jack has 2 switching contacts that are designed as change switch. These jack sockets are basically downwards compatible. For example, this 9-pin socket can also be used for the 7-pin version. To do this, it is sufficient to cut the two extra soldering legs.Furthermore, there are two plastic noses on the underside, which are intended as a guide and holding tiller. These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 3 .99*

Kawai

Contact rubber Kawai RG88B

1 pcs. Contact rubber for Kawai KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high: 11 mmStrip bright: 25 mmStrip length: 164 mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 15 .90*

Kawai

Kawai DC Power Jack 1 mm with solder pins

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES100Kawai ES110Kawai ES120Kawai VPC1This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 5,9 mminner Diameter: 1 mmMechanical Description:The DC jack housing is made of plastic and the power jack is designed for direct board mounting.Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.

€ 5 .84*

Kawai

Kawai Hammer upper limit Felt for E-Piano Keyboards, RH88

1 pcs. Kawai upper limit Hammer Felt for E-Piano Keyboards HAMMER UPPER-LIMIT CUSHIONThis felt is used by Kawai in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. In the Drawing it the felt with the number 36 For better mounting this felt is equipped with an adhesive tape.Material name: KBFZ-0125 Attention: For quite old keyboards, the felt has a different height!!!The old felts have a height of 12 mm while the current felt has a height of 10.5 mm.

€ 30 .46*

Kawai

Kawai RH88 felt HAMMER LOWER-LIMIT CUSHION

1 pcs. Kawai lower hammer Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the hammers when they are returning to zero position. In the drawing it is the felt with the number 37This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.

€ 30 .46*

Kawai

Kawai Power Button for Stage Serie

1 pcs. Kawai Power Button RoundKawai ES-6Kawai ES-7Kawai ES-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of diameter 11 mm. This part has one Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .36*

Kawai

Kawai RH88 felt KEY LOWER LIMIT CUSHION

1 pcs. Kawai Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.

€ 14 .72*

Kawai

KAWAI RH88B Replacement keys for Keyboard

Keys: Key black

Replacement keys for KAWAI Keyboard RH-88Bsuitable forKawai CN33Kawai CN34Kawai ES7Kawai MP7The Kawai RH88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RH88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88

€ 16 .89*

Synth-Parts

Power cable 2 pol for EU, 1.8m

1 pcs. Power cabel 1,8 m with 2P plug for Europe

€ 6 .89*

Kawai

Kawai Sliptape, prepunched 100 pcs.

1 Set. Kawai Sliptape, prepunchedSet with 100 pcs.Size of a sliptape section: 4x12 mm.For old keyboards, the sliptape should be placed in the center because the sliptapes used in earlier times has been larger.This pre-cut sliptape fits only for hammer in plastic keyboards. Do not use this Sliptape in Kawai Wood Keyboards.

€ 43 .49*

Order spare parts for Kawai easily online.

E-Pianos and Stage Pianos are devices that are exposed to a continuous load and must withstand it reliably. This is true for private use, as well as for professional use. If the smallest components do not work, the entire system cannot deliver the desired first-class sound. We offer in our store Kawai spare parts products that continue brand quality even after replacement in the usual way. This includes e-piano spare parts and stage piano spare parts, but also encoder for Kawai, jack socket for PCB mounting or LCD display for Kawai.All Kawai spare parts in our store have one thing in common: they convince in material and workmanship quality. We know that when musicians are hitting the keys or technicians are doing their job, there is no time for long breakdowns. Therefore, the Kawai spare parts are optimally compatible and can be replaced without any problems and, above all, quickly and easily. The gig or rehearsal can continue immediately afterwards. Just give us a call or send an email if you are not sure which spare part for Kawai you should buy, or which e-piano spare parts or stage piano spare parts are the right ones for the models you use. We will be happy to advise you!

Do not compromise on quality

A system is only as powerful as its smallest component. This means for you that Kawai spare parts should also be purchased and installed in brand quality that you know from the manufacturer. This applies to tact switch for Kawai, as well as to the LCD display for Kawai or any other E-Piano spare parts. If you compromise here, you are making a big mistake. Professionalism, which you need on stage, is also essential for spare parts. No matter if you want to buy an potentiometer for Kawai or a tact switch for Kawai, the same professional quality is appropriate as if a device is bought completely. For all questions we are happy to help you. Jack for PCB? E-Piano spare part? No matter what you need: We advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your efficient contact partner when it comes to installing the spare parts.

Filter products

Kawai

Order spare parts for Kawai easily online.

Do not compromise on quality