Chassis - Casing - Units

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040.The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CS4Kawai CN24Kawai CN25Kawai CN27Kawai CN29Kawai CN34Kawai CN35Kawai CN37Kawai CN39Kawai ES7Kawai ES8Kawai ES920Kawai MP7Kawai MP7SEClavia Nord Grand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

1 pcs. Yamaha Headphone HPE170 EAR PAD ASSYThe ear cups have a narrower opening for attaching them to the headphones. The replacement procedure requires a bit of force.The Yamaha HPE-170 headphones were launched in 1993. We offer here one new ear cup, suitable for the Yamaha headphones HPE170. The ear pad is a original Yamaha spare part. 

1 pcs. Nord Pedal Spring  

1 pcs. Pitch bend Assembly for Korg Music Production WorkstationKorg KronosKorg Kronos 2Korg Pa3XKorg Pa3X ProKorg Pa4XKorg Pa4X ProKorg Pa300Korg Pa600Korg Pa700Korg Pa900Korg Pa1000This pitch bend unit is complete and ready to plug in wired for easy exchanging this unit. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all. 

1 pcs E-mu Silent Fan Replacement 3HE RackWe offer here an Austasuch Silent fan for all E-mu rack instruments with 3 height units device size.Prepared ready to plug in. No soldering is required.Scope of delivery:    Fan with only 12dbA    Mounting material    Installation instructionsWith many of the E-Mu rack devices, the noise generated by the fan on the power supply unit is a major problem. The fan noise can be very annoying, especially in quiet studio environments.One noise will always remain. Whenever something moves, a noise is produced. So there is no such thing as a truly noise-free fan. But we offer the most powerful fan on the market. With the same technical data as the original fan.  

1 pcs. Yamaha contact PCB for Yamaha GHL88 KeyboardThis keyboard is used inYamaha P-115Yamaha P-125Yamaha YDP-S30Yamaha YDP-143

1 pcs. Clavia Nord Pitch Stick long cable 

1 pcs. Service Kit Kawai RH88A PWB Assy KKB-034This service kit replaces the circuit boards and contact rubbers in the Kawai RH88A keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CN23Kawai CN33Kawai CN43Kawai CS3Kawai MP6

1 pcs. Yamaha Tyros  Speaker StandThis housing is made of plastic

1 pcs. Joystick  Assembly forKorg KROME 61Korg KROME 73Korg KROME 88This Joystick  unit is complete and ready to plug in wired for easy exchanging this unit. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all. 

1 pcs. Service Kit Kawai WN88 PWB Assy KKB-039This service kit replaces the circuit boards and contact rubbers in the Kawai WN88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA65Kawai CA95Kawai CS7Kawai CS10Kawai MP11Kawai VPC1

Pedal Assembly for Yamaha E-Pianos XR780On this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Depending on the model, this pedal was supplied with a potentiometer or contact rubber in the damper pedal. Please be sure to check the pedal before ordering a replacement part. 

1 pcs. Clavia Nord Pitch Stick short cable 

1 pcs Yamaha FUSTB AC-IN Board

1 pcs. new Korg RH4 PCB Assy KeyboardThis keyboard is used inKorg Krome 88Korg SP-280RH-4, RH-4L or RH-4HL—one letter—big difference. Please note.this is set of three contact PCB as used in Korg RH-4.This set contains LOW, MID ans HIGH contact PCB  - KLM-2949/2950/2951 The circuit board is partially supplied with a blue protective film over the contacts. This protective film must be removed before installation. 

1 pcs. Clavia Nord 3 way Power Supply IEC14 12P Connector  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 12-pole ribbon cableThis Power supply deliver:+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

Pedal Assembly for Yamaha E-Pianos  WV9125 Practice tip:Apparently, this socket has always contact with the ground. In the case of the spare part supplied by Yamaha Yamaha then sees this vertical socket replaced by an angled socket.

1 pcs. Yamaha spezial IC for Power SupplyWe offer here a replica of the original Yamaha Power Stream IC. The replica is developed and distributed by Yamaha.Manufactured in modern SMD technology. With this your Disklavier will be functional again.Safety notice:Switching power supplies store high voltages of approx. 300 volts DC over a long period of time. This spare part is only for specialists with appropriate knowledge of electrical engineering.Technical Hint:This replica of the XK413A0 is a 1:1 replacement of the original Power Stream IC used by Yamaha in various switching regulator power supplies.Practical hint:The IC is firmly soldered onto a circuit board. Manual dexterity and experience in soldering are required for replacement.IC's are sensitive to static charge!  

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(1)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040. The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CN17Kawai KDP110Kawai KDP120Kawai ES520Caution during disassembly: The operation LED on the front of the piano is plugged into the sensor board.

1 pcs. Yamaha MA160S PSU PCB X4384For Europe only:  Used in:Yamaha CVP-307Yamaha CVP-407Yamaha CVP-409 

1 pcs. Yamaha MA80S PSU BoardFor Europe only: 230VACUsed inYamaha CVP-303 

1 pcs. Clavia Nord 4 way Power Supply IEC14 V1.3  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 10-pole ribbon cableThis Power supply deliver:+ 3.3 Volt+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

Korg Pa2X Encoder SupportKorg Pa2XKorg Pa2X Pro