Kawai MP6

Panasonic

tactile switch 5 mm for Kawai

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

1 pcs. Kawai Holder Score Stand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

€ 9 .59*

Kawai

Contact rubber Kawai RH88A

1 pcs. Contact rubber for Kawai KeyboardFeatures:Height of contacts: 11 mmWidth of the strip: 25 mmLength of the strip: 164 mmNumber of contacts per strip: 12Note on replacing the RH88A contact rubbers:Please always replace all contact rubbers in the keyboard.A new contact rubber has better playing dynamics than a contact rubber that is 8 or 10 years old. If you replace only one contact rubber, you will notice differences in the playing dynamics.A contact rubber consists of 12 contacts and covers an octave. A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 18 .90*

Kawai

Kawai Hammer upper limit Felt for E-Piano Keyboards, RH88

1 pcs. Kawai upper limit Hammer Felt for E-Piano Keyboards HAMMER UPPER-LIMIT CUSHIONThis felt is used by Kawai in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. In the Drawing it the felt with the number 36 For better mounting this felt is equipped with an adhesive tape.Material name: KBFZ-0125 Attention: For quite old keyboards, the felt has a different height!!!The old felts have a height of 12 mm while the current felt has a height of 10.5 mm.

€ 30 .46*

Kawai

Kawai RH88 felt HAMMER LOWER-LIMIT CUSHION

1 pcs. Kawai lower hammer Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the hammers when they are returning to zero position. In the drawing it is the felt with the number 37This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.

€ 30 .46*

Kawai

Kawai RH88 felt KEY LOWER LIMIT CUSHION

1 pcs. Kawai Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.

€ 14 .72*

Kawai

Kawai RH88A PWB Assy KKB-034

1 pcs. Service Kit Kawai RH88A PWB Assy KKB-034This service kit replaces the circuit boards and contact rubbers in the Kawai RH88A keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CN23Kawai CN33Kawai CN43Kawai CS3Kawai MP6

€ 164 .99*

Synth-Parts

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

€ 1 .99*

Kawai

Kawai RH88 felt KEY STOPPER CUSHION

1 pcs. Kawai Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are returning to zero position. In the drawing it is the two felts with the number 34This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.

€ 30 .46*

Kawai

Kawai Volume Slider Knob for MP Stage Serie

1 pcs. Kawai Volume Slider KnobKawai MP-8Kawai MP-11 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

€ 11 .07*

Kawai

Kawai Round Knob for Stage Serie

1 pcs. Kawai Round KnobKawai MP-8Kawai MP-7Kawai MP7SEKawai MP-11Technical Description of Kawai Knob:This Round knob will be put on rotary potentiometer on your Kawai Stage Pianos

€ 11 .07*

ALPS

Kawai Volume Slider 30mm Travel

1 pcs. Kawai Volume Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Kawai

Kawai Ring for Round Knob for Stage Serie

1 pcs. Kawai Ring for Round KnobKawai ES-7Kawai MP-8Kawai MP-11 Technical Description of Kawai Knob:This ring for Round Knob is placed on the axis of the rotary potentiometer and pressed into the housing. The ring centers the axis of the rotary potentiometer in your Kawai Stage Piano.

€ 11 .07*

Kawai

Kawai Button for MP series Stage Piano Large

1 pcs. Kawai Button Duo large 14 x 8 mmKawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 14 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .07*

Kawai

Kawai Button for Stage Serie Small

1 pcs. Kawai Button Duo Small 11 x 8 mmKawai ES-7Kawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 11 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .07*

Kawai

Kawai Potentiometer for Pitch Bend VQ764300

1 pcs. Kawai Rotary Potentiometer for pitch bendThis poti is used in

€ 13 .90*

Kawai

Kawai Potentiometer for Modulation

1 pcs. Kawai Rotary Potentiometer for Modulation

€ 13 .78*

ALPS

Kawai Value Slider 30mm Travel

1 pcs. Kawai Value Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Synth-Parts

Kawai Rotary Poti vertikal Real Time Control

1 pcs. Kawai Rotary Poti vertikal Real Time Control Electrical properties:The nominal resistance is 10 kOhm. The original potentiometer from Kawai has a resistance value of 20 kOhm. Since this potentiometer is used as a voltage divider, the resistance value is not decisive.Appearance (technical characterisation):The casing measures 11 x 11 mm, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin. Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .95*

Kawai MP6 spare parts easy to buy online

The Kawai MP6 stage piano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Kawai is used a lot then the individual components of the Kawai MP6 electric piano are subject to wear. Anyone who likes to play a lot on his Kawai MP6 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Kawai MP6 digital piano may need to be replaced by a new component. During frequent disassembly and assembly of the stage piano on stage, the phone jack, the power supply or the power cord are stressed hard. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control is defective. With us you can easily buy a new potentiometer for your Kawai MP6 Stage Piano.

We supply spare parts for Kawai MP6 electric piano worldwide.

We are your reliable supplier for spare parts of your Kawai MP6 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potetniometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Kawai spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Kawai MP6 electric piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Kawai buys the components. Our original Kawai spare parts like sliptape, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Kawai MP6 Stage Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.

Filter products

Kawai MP6

Kawai MP6 spare parts easy to buy online

We supply spare parts for Kawai MP6 electric piano worldwide.