Yamaha KX61

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie    -  without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. new Contactrubber for Yamaha 16NW KeyboardThis keyboard is used in these modells:Yamaha MOX6Yamaha Tyros 1Color of these Contactrubber may be different.

1 pcs. HEC470-01-630 DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha P-85Yamaha P-140We offer the original Hosiden power socket here.technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5050 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha      VU48130R  REB161-PVB  

1 pcs external Power Supply Unit Yamaha PA-130B Replacement for Yamaha PA-3B PSUReplacement for Yamaha PA-3C PSU Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

Key's 16N unweighted suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e403Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Contact PCB for Yamaha 16NW keyboard PCB high

1 pcs. Yamaha KX series OLED Display new white this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 Mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new yellow this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new blue this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new green this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new red this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX-serie Knob for encoderYamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8Praktical tip:The knobs are just plugged on. No tools are needed.