Technics SX-PR603

ALPS

Encoder 12 mm Technics short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsTechnics KN5000Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

Technics

Technics RH3 Tastatur hammer lower limit felt

1 Pc. Technics Lower Hammer Stop Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times.

€ 10 .95*

ALPS

Volume Slider for Technics

1 pcs. Slidepotentiometer with 25mm Travel. Suitable for Volume Slider forTechnics PR-Serie E-Pianos Technics PX-Serie E-Pianos Technics P-Serie Stage-Pianos These potentiometers fit the vast majority of Technics keyboard instruments. There are few exceptions where this does not fit. Please look ahead.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .75*

Synth-Parts

Technics Pedalcable No1

1 pcs. Technics Pedalcable No1Pedal cable (2 meter) with plug used by Technics E-Piano models.Technics PC15Technics PC25Technics PR554Technics PR603Technics PR663Technics PR703Technics PR903This cable is also used on other Technics E-Piano modell but the pin assignment differs.The cable fits variants with 3 pedals and has a 4 pol mini Din plug.Handcrafted faithfully reproduction made by Synth-Parts

€ 39 .50*

Technics

Replacement keys for Technics SK25 Keyboard, purwhite

Taste: Key A

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

€ 12 .48*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Technics

Cap quadratic for power switch in Technics E-Pianos

Cap quadratic for power switch suitable in Technics E-PianosTechnics PX101Technics PX103Technics PX107Technics PX111

€ 7 .90*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

€ 9 .52*

Technics

Holder QMRG7029A for Technics E-Pianos

1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic

€ 4 .76*

Technics

Holder QMRG7028for Technics E-Pianos

1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic

€ 4 .76*

Synth-Parts

MOSFET FS30KMJ-03

1 pcs. FS30KMJ-03Pch Power MOSFET Housing: TO220VDss: - 150VId: - 30APd: 35WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.

€ 4 .96*

Synth-Parts

MOSFET FX30KMJ-03

1 pcs. FX30KMJ-03Pch Power FX30KMJ-03 Housing: TO220VDss: - 30VId: - 30APd: 25WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.

€ 4 .96*

JST

JST FJ Plug 5 pin for printed circuits

JST FJ Plug 5 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Plug 10 pin for printed circuits 10PL-FJ

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 10 pin for printed circuits 10R-FJ

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 5 pin for printed circuits

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

Technics

Mainboard QJBG2351 repairing with 1 year warranty

1 pcs. Mainboard Repair for Technics E-PianosTechnics SX-PR603Technics SX-PR703The circuit boards are tested and repaired by us. After successful testing of the circuit boards, we give you a one-year guarantee.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

€ 238 .00*

Technics

AMP-PSU Board QJBG2298 tested with 1 year warranty

1 pcs. Amplifier/Power Supply Board for Technics E-PianosTechnics SX-PR603These AMP-PSU Board is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

€ 350 .00*

Technics

Contact rubber SK25 for E-Piano Keyboard

1 pcs Contact rubber SK25 for Technics E-PianoFor the complete exchange of the contact strips in a keyboard with 88 keys 7 contact rubbers with 12 contacts and 1 contact rubber with 4 contacts are required.

€ 12 .90*

Technics

Transformer Technics PR603

1 pcs. Transformer Technics PR603This Transformer is usedd and in a good condition.suitable forTechnics PR603technical Hint:The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

€ 98 .00*

Synth-Parts

Technics PR-603 LCD Display new

1 pcs. brand new LCD Display with blue LED backlight suitable forTechnics PR-602Technics PR-702Technics PR-902Technics PR-603Technics PR-703Technics PR-903Technics PR-1000The LCD displays built into the PR-603, PR-703 or PR-903 e-piano series by Technics are now aging. The original displays have a small fluorescent tube, a so-called CCFL backlight, as backlight. It is possible that only the backlight is defective or the whole display is defective. This can be that only single pixels in the display are missing or whole lines in the LCD no longer work. In extreme cases, entire areas of the screen can also fail. If only the CCFL backlight is defective you can use a new fluorescent tube. The whole thing requires very calm hands and patience because these backlight tubes have a diameter of only 2 mm. Therefore they are very sensitive and delicate. Here it is also necessary to solder. As an alternative we offer a replacement LCD equipped with modern LED backlight. If the display already has major defects or if you want to save yourself the soldering effort, this replacement display is a good choice. Scope of delivery:1 pc. new LCD display, ready wiredAssembly materialshort installation instructions Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise.We have prepared everything so that the installation on your electric piano is as easy as possible. With the replacement display you will receive all the necessary parts for the installation. No soldering work is required. All cables are plugged in. Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components.

€ 197 .99*

Technics

Parts SK25 Keyboard for technics E-Pianos

Ersatzteile Tastatur: Keyguide

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

€ 4 .25*

Technics

Technnics ASUB Circuit Board QJBG2298-11, repaired

1 pcs. Technics ASUB Circuit Board QJBG2298 repairedTechnics SXPR-602Technics SXPR-603Technics SXPR-702Technics SXPR-703These circuit board was repaired by us and is tested and fully working.important note - complex electronic errorFaults in the amplifier circuitry of these Technics electric pianos are very complex and require extensive electronics knowledge and professional experience.A new ASUB board is only part of the solution.We do not assume any warranty if a new ASUB board is inserted into a defective amplifier.

€ 138 .99*

Filter products

Technics SX-PR603

Technics E-Piano SX-PR603