Korg Pa800

Fatar

Contact rubber for Fatar Keyboards

Kontaktgummi: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

Panasonic

tactile switch 5 mm Korg

1 pcs. tactile switch suitable for models Korgis40, is50Pa1 XPro, Pa2 XProPa50 without LCD BoardPa60, Pa80, Pa500, Pa800SP200Korg Part Number: INT0001008The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

KORG

Singlel Button UP for Pa1X

Single Button UPKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Singlel Button DOWN for Pa1X

Single Button DOWNKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Singlel Button 17x7 mm, NO LED window for Pa1X -Discontinued

Single Button 17 x 7 mm (No Window)Korg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Singlel Button 19x7 mm, NO LED window for Pa1X Discontinued

Single Button 19 x 7 mm (No Window)Korg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Singlel Button 19x7 mm, LED window for Pa1X -Discontinued-

Single Button 19 x 7 mm with WindowKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Singlel Button RED 19x7 mm, LED window for Pa1X Discontinued

Single Button RED 19 x 7 mm with WindowKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future. No longer suitable!!!! Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 8 .98*

KORG

Pitch Bend Assembly for Korg Pa-series - discontinued -

Pitch bend Assembly for Korg Music Production WorkstationKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800item is discontinued by Korg.This pitch bend unit is complete and ready to plug in wired for easy exchanging this unit. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all.

€ 47 .00*

ALPS

Encoder Typ12 for Korg Pa series

Encoder 12 mm footprint and short axis suitable for modelsPractical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .89*

Fatar

Replacement keys for Fatar TP/9 Keyboard, weighted

Taste: Key A

Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

Variants from €5.70*

€ 8 .90*

Filter products

Korg Pa800