Yamaha TG-series

ALPS

tactile switch 4,3 mm Yamaha

tactile switch suitable for modelsYamaha DX7II, DX7IID, DX7IIFDYamaha SY77, SY99Yamaha Part no: KA907030 und VF946200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Synth-Parts

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .44*

Varta

CR2032 Solder pin for Yamaha DX-Series

1 pcs. CR2032 with 2 solder pin suitable forYamaha DX7, DX7 II, DX9, DX27, DX100Yamaha TG77Yamaha RX5, RX7, RX11Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The distance between the solder legs is 15 mm.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .49*

Hosiden

HLJ0544 Phone Jack 1/4 - 6.3 mm PCB Stereo ,Iron frame

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo, for printed circuit with Iron FrameThe item is the same asHLJ 0544-01-010Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating.Praktikal tip:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 4 .87*

Synth-Parts

Yamaha TG33 OLED Display white

1 pcs. brand new white OLED Display forYamaha TG33We offer here a factory new OLED display as a replacement for the original LCD display that Yamaha had installed in the TG33. The OLED display is ready to install, no soldering required. Hints for mounting:In order to install this new OLED display in the Yamaha TG33, the mechanical assembly has to be carried out slightly differently to how it was solved with the original display. The original LCD display in the TG33 was screwed from the back onto retaining lugs provided in the housing. The new OLED can also be mounted in this way, but it is then quite far back and visually there is a tunnel effect from the outside. It makes more sense to screw the display onto the other side of the retaining lugs, because then the OLED display lies directly against the windscreen. For this installation, however, the entire housing of the Yamaha TG33 must be dismantled. This makes the installation more complicated.The new OLED display will be delivered by us ready wired. No soldering work is necessary for this installation. Scope of delivery:1 pc. new OLED display, ready wired Notes on disposal:every electronic component contains important raw materials that should be recycled. Please find out where in your city is a corresponding collection point for these components.

€ 58 .99*

Synth-Parts

Yamaha TG55 LCD Display yellow new

1 pcs. LCD Display yellow brandnew forYamaha TG55this is a plug in ready Display replacement for Yamaha TG55 .We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Synth-Parts

Yamaha TG55 LCD Display black new

1 pcs. LCD Display black brandnew forYamaha TG55this is a plug in ready Display replacement for Yamaha TG55 . You will only need a screwdriver for this replacement.We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Synth-Parts

Yamaha TG55 LCD Display blue new

€ 63 .50*

Synth-Parts

Yamaha TG33 OLED Display green

1 pcs. brand new green OLED Display forYamaha TG33We offer here a factory new OLED display as a replacement for the original LCD display that Yamaha had installed in the TG33. The OLED display is ready to install, no soldering required. Hints for mounting:In order to install this new OLED display in the Yamaha TG33, the mechanical assembly has to be carried out slightly differently to how it was solved with the original display. The original LCD display in the TG33 was screwed from the back onto retaining lugs provided in the housing. The new OLED can also be mounted in this way, but it is then quite far back and visually there is a tunnel effect from the outside. It makes more sense to screw the display onto the other side of the retaining lugs, because then the OLED display lies directly against the windscreen. For this installation, however, the entire housing of the Yamaha TG33 must be dismantled. This makes the installation more complicated.The new OLED display will be delivered by us ready wired. No soldering work is necessary for this installation. Scope of delivery:1 pc. new OLED display, ready wiredshort installation instruction Notes on disposal:every electronic component contains important raw materials that should be recycled. Please find out where in your city is a corresponding collection point for these components.

€ 58 .99*

Yamaha

IC HD6475328CP10 SY55/TG55

1 pcs. IC HD6475328CP10 SY55/TG55Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 99 .00*