Korg KROME 88

Panasonic

tactile switch 9,5 mm long life Korg

1 pcs. tactile switch suitable for models KorgLong life:This switch has a lifetime 10 times longer than the original switch Korg build inBX3, CX3 new Version build 2002i30ix300 Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

KORG

Contact rubber 12P for RH4 Keyboard

Contact rubber 12 points for RH4 Keyboard Contact high: 7,5 mmStrip bright: 22,3 mmStrip length: 165 mmNumber of contacts: 12Roland Part Number: 4671145A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 88 keys 7 contact strip + 4 pins are needed. The remaining 4 contacts can be easily separated from a rubber contact strip with 12 contacts. A notch is provided in the rubber contact strip after every four contacts for this purpose.

€ 10 .79*

ALPS

Encoder 12 mm with short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsKorg M3Korg OasysKorg TritonKorg Triton leKorg Triton extremeKorg Triton ProKorg Triton ProXThis is the original Korg spare PartPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

Synth-Parts

Stereo rotary potentiometer 12mm for Korg

1 pcs. Replacement stereo rotary potentiometer 14mm suitable forKorg KROMEElectrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 12 mm widht, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the axis rises with 18 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The six solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .84*

KORG

Hammer for RH4 Keyboard

Hammer: Hammer Zone 1 black key

Replacement Hammer for RH4 KeyboardThe RealHammer 4 (RH4) keyboard is a 4 zone hammer mechanism.This Keyboard is also known as "Natural weighted Hammer Action".

€ 8 .90*

KORG

Korg RH4 Keyboard felt

Parts Keyboard: Felt Hammer

Korg RH4 Keyboard feltsRH4 keyboard is used in Korg SP-170Korg SP-280Krome 88All felt are fittet with self adhesive tape. For complete replacement of one 88 key keyboard you will need:2x Felt upper5x Hammer felt 12P - L11x Hammer felt L21x Hammer felt L3

Variants from €4.88*

€ 9 .98*

KORG

Button 17x6 mm, transparent for KROME

1 pcs. quadruple Button 17 x 6 mm transparent Korg KROME 61Korg KROME 76Korg KROME 88Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Korg Instruments and is build for a Casing Window of 17 x 6 mm.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

€ 7 .29*

KORG

Parts for RH4 Keyboard

Key: Keys Octave First

Replacement Keys for RH4 KeyboardRH4 keyboard is used in Korg SP-170Korg SP-280Krome 88 Color: whiteThe RealHammer 4 keyboard (RH4) is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 22.8 cm with a width of 2.24 cm. The depth of the key is 4.5 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is formed downside the key. The Contactor is 11 cm from the front. At the back end, the keys are connected with other keys over a bridge. These keys are only available as complete set for a Octave.4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful. This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

€ 44 .90*

KORG

Korg RH4 PCB Assembly Keyboard

1 pcs. new Korg RH4 PCB Assy KeyboardThis keyboard is used inKorg Krome 88Korg SP-280this is set of three contact PCB as used in Korg RH-4.This set contains LOW, MID ans HIGH contact PCB - KLM-2949/2950/2951 The circuit board is partially supplied with a blue protective film over the contacts. This protective film must be removed before installation.

€ 108 .99*

KORG

Knob for Korg KROME

1 pcs. Knob for rotary potentiometers inKorg KROMESpecifications:Diameter top: 9 mmDiameter bottom: 10 mmHight: 14 mmShaft: 6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

€ 8 .57*

KORG

Joystick Assembly for Korg KROME

1 pcs. Joystick Assembly forKorg KROME 61Korg KROME 73Korg KROME 88This Joystick unit is complete and ready to plug in wired for easy exchanging this unit. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all.

€ 39 .00*

KORG

Korg Pitch Bend Potentiometer - discontinued

1 pcs. Korg Pitch Bend PotentiometerThis is a replacement Poterntiomter for Korg Pitch Bender. This Potetniomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):THis Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .79*

KORG

Korg Pitch Bend 2 pcs. Potentiometer with PCB- discontinued

1 Set Korg Pitch Bend Potentiometer witch PCB KLM2304 / KLM2305This is a replacement Poterntiomter for Korg Pitch Bender. This Potentiomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.This is a set of two Potentiometers for Korg Pitch Bend.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Replacement for PCB KLM2304 and KLM2305Useful hint:This Potenziometer is ready mounted on the PCB. For replacement you have only to connect the cable.

€ 14 .90*

KORG

Korg Krome Memory card

1 pcs. Korg Krome Memory card 4GB

€ 64 .89*

Filter products

Korg KROME 88