Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Waldorf Microwave II

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
Jalco
YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .49*
YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Jalco
YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .49*
Tactile switch 9,5 mm for Waldorf Synthesizer
ALPS
Tactile switch 9,5 mm for Waldorf Synthesizer
1 pcs. tactile switch suitable for modelsWaldorf MicroqWaldorf MicrowaveWaldorf Microwave IIWaldorf Microwave XTThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .94*
Waldorf Microwave II OLED Display new white
Synth-Parts
Waldorf Microwave II OLED Display new white
1 pcs. OLED Display brandnew in white forWaldorf Microwave IIthis is a plug in ready Display replacement for Waldorf Microwave II .Soldering is requiredNotes on installation:We deliver this OLED dislpay for the Waldorf Microwave 2 synthesizer ready for installation. All cables are ready mounted.The original display in the Waldorf Microwave 2 is soldered on both sides of the cable. To replace the display, the old cable connection must be desoldered.- Instructions are enclosed with the display.Advantages of our OLED Display Set for the Waldorf Microwave 2:An OLED display is very easy to read from all sides, even at an extreme viewing angle. In addition, we supply mounting material with which the display it even closer to the display cover. This improves the readability from a steep angle even more.We supply the display with a detachable plug connection.The color of the shown display, may differ from the original.Installation service for Waldorf Microwave 2:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 112 .46*
Waldorf Microwave 2 Recapping Set
Synth-Parts
Waldorf Microwave 2 Recapping Set
Recapping set for Waldorf Microwave 2The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Waldorf Microwave 2 is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for complete Waldorf Microwave 2The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 15 .35*
DIN female 5 pin MIDI for printed circuits
Jalco
DIN female 5 pin MIDI for printed circuits
1 pcs. MIDI DIN socket female 5 pin for printed circuitsused by: KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 6 .94*
Waldorf Microwave 2 Encoder 16 mm footprint without detent
Synth-Parts
Waldorf Microwave 2 Encoder 16 mm footprint without detent
1 pcs. Encoder 16 mm wide suitable forWaldorf Microwave 2The Waldorf Microwave II has 4 of these encoders without detents. These encoders are mounted below the display.Practical advice:The axis of this encoder is 2 mm longer than the axis of the original encoder of the Waldorf Microwave 2. Under circumstances the axis must be shortened. Since the axis of the encoder is made of plastic, shortening is quite easy.These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 5 .99*
Waldorf Microwave 2 Encoder 16 mm footprint with detent
Synth-Parts
Waldorf Microwave 2 Encoder 16 mm footprint with detent
1 pcs. Encoder 16 mm wide with Detends suitable forWaldorf Microwave 2The Waldorf Microwave II has one of these encoder with detents. These encoder is mounted beside the display.Practical advice:The axis of this encoder is 2 mm longer than the axis of the original encoder of the Waldorf Microwave 2. Under circumstances the axis must be shortened. Since the axis of the encoder is made of plastic, shortening is quite easy.These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 5 .99*
Synth-Parts
DC Power Jack No6 with solder pins for PCB
1 pcs. DC Power Jack 6 mm with solder Pins for PCB mounting suitable for modelsWaldorf Microwave 2technical Dates:Termination Solder PinOuter Diameter: 6 mmInner diameter: 1.98 mm Mechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 3 A at 34 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 5 .06*
Synth-Parts
DC Power Plug No06 soldering
1 pcs. DC Power Plug 6 mm suitable for modelsWaldorf Microwave 2technical Dates:Termination SolderingOuter Diameter: 6 mmInner Diameter: 1.98 mm Mechanical Description:The housing of the Power Plug is made of Plastic and cable is soldered on it.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 3 A.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 6 .78*

Waldorf Microwave 2 spare parts easy to buy online



Waldorf synthesizers, even if they were developed in the 1980's or in the 1990' years, enjoy a very large popularity. No matter in which field you use your Waldorf Microwave 2 synthesizer, at some point you will need a spare part. Every electromechanical component, be it a potentiometer, a button or an encoder is subject to wear. Due to the fact that something is moved like a potentiometer or comes into contact like a short-stroke tactile switch, the contact surfaces wear out. The LCD display used in the Waldorf Microwave 2 also has a limited lifetime. The life span of LCD display is with 20 years already quite long, but the luminosity of the backlight decreases steadily over the years. If you want to replace your LCD display, we offer in our online store an OLED display as a replacement for the LCD display used in the Waldorf Microwave 2.
The Waldorf Microwave 2 is powered by an external power supply. This spare part is also subject to a lifetime, or maybe you just misplaced the power supply for the Waldrof Microwave 2. We offer a replacement power supply of the same quality as the original Waldorf plug-in power supply. The jacks used in the Waldorf Microwave 2 can also be easily replaced with our offers.





We supply spare parts for Waldorf Microwave 2 Synthesizer worldwide.



We are your reliable supplier for spare parts of your Waldorf Microwave 2 synthesizer. We offer our spare parts like jack sockets, encoders or short travel keys in our online store. We also have the matching potentiometers in stock all the time. Original or OEM spare parts like contact rubber, buttons and encoders we also have in our assortment. Spare parts we have partly also in OEM quality for the Waldorf Microwave 2 Synthesizer in stock. For us OEM quality means that we get spare parts like buttons, potentiometers or jack sockets directly from the same supplier where Waldorf buys the components. Our original Waldorf spare parts like contact rubber or sensor board are usually shipped by Deutsche Post or DHL. If the delivery of your needed spare part for the Waldorf Microwave 2 synthesizer is especially urgent, please contact us. We can also organize an express delivery with UPS.