Kawai CA97

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Kawai Sliptape, stripeThis Sliptape is for old and new wood Keys.8 contiguous strips are delivered which are cut to size. This amount is enough for more than one keyboard. So you can also cut something.You will find here a Blog articel for this Item:Sticky key on Kawai E-Piano Practical Hint for Kawai Sliptape:When replacing the sliptapes on the wooden keys, you have to be extremely accurate and meticulous. Especially the removal of glue residues on the hammer heads is extremely important. 

1 pcs. Piano felt as alternative to Kawai sliptapeOur alternative for the sliptape used by Kawai for wooden keys.Our alternative to the slip tape used by Kawai for wooden keys.Piano felt, an old and proven product from piano making. This piano felt is used by every piano maker exactly where mechanical resilience is required. Where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as silently as possible.In the Kawai digital pianos in which wooden keys are used is exactly such a mechanical load given from Kawai with a so-called Sliptape is padded. This piano felt here is best suited to replace the Kawai sliptape.Compared to the original Kawai Sliptape, the key pressure on this felt is very slightly more sluggish. However, this should improve with use as the felt becomes smoother with use.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing pasteThe felt strip supplied is more than sufficient for one keyboard with 88 keys. 

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Phone Jack 1/8 inch - 3.5 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha InstrumentsJalco phone jack YKB21-5344This phonejack is a stereo jack socket with 9 solder legs. In addition to the signal contacts for stereo signal transmission, this jack has 2 switching contacts that are designed as change switch. These jack sockets are basically downwards compatible. For example, this 9-pin socket can also be used for the 7-pin version. To do this, it is sufficient to cut the two extra soldering legs.Furthermore, there are two plastic noses on the underside, which are intended as a guide and holding tiller. These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

1 pcs. Kawai PCB KKB-018 Pedal PCBThis circuit board is used in many Kawai pedals.A pedal no longer works for you? Small trim potentiometers are mounted on the circuit board. With these potentiometers the operating point of the respective pedal can be adjusted.Kawai uses light-sensitive sensors here. In daylight, the pedal has no function.

1 pcs. Kawai Power Buttonblack  for CA/CN Modells Technical Description of Kawai Button:This Button fits for many Kawai Pianos and is build for a Casing Window of 17 x 11 mm. This part has one Button. It is used with Powerswitch with plungers.Practical tip:This button is simply clipped on 

1 pcs. Yamaha USB Socket Typ A PCBJalco YKF45-0021used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Service Kit Kawai RN88 PWB Assy KKB-039(2)This service kit replaces the circuit boards and contact rubbers in the Kawai WR88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039(2).The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11 

1 pcs. Contact rubber for Kawai WR88 KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high:  11 mmStrip bright:   25 mmStrip length:  164  mmNumber of contacts: 12These contactrubber for e-pianos has been used in:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

1 pcs. Kawai Volume Slider Knob for CA/CN Serie Black1/Ivory1Kawai CA95Kawai CN23 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Pianos 

1 pcs. Kawai Pedal screwDimensions: M8 x 15 mm Note: