Korg Triton Pro

Panasonic

tactile switch 9,5 mm long life Korg

1 pcs. tactile switch suitable for models KorgLong life:This switch has a lifetime 10 times longer than the original switch Korg build inBX3, CX3 new Version build 2002i30ix300 Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Panasonic

tactile switch 9,5 mm Korg

1 pcs. tactile switch suitable for models KorgBX3, CX3 new Version build 2002i30ix300 Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .63*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Yamaha

Replacement keys and parts for FS Keyboard

Key: Aftertouch 76

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition

Variants from €0.67*

€ 88 .99*

ALPS

Encoder 12 mm with short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsKorg M3Korg OasysKorg TritonKorg Triton leKorg Triton extremeKorg Triton ProKorg Triton ProXThis is the original Korg spare PartPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

ALPS

tactile switch 7 mm Korg

tactile switch suitable for SW1/SW2 in models Korgi30, i30HDOasysTriton, Triton: Le, Extreme, Pro, ProXThese switch is only used for SW1/SW2 at Joystick.Korg Part Number: 375010900The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Jalco

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .81*

Synth-Parts

Korg Triton Slidepotentiometer - EWANA0C10B14, Volume

1 pcs. slide potentiometer with 30mm travel. Suitable Slider forVolume Control forKorg C150, C350, C3200, C6500Korg ix300, I5SKorg KarmaKorg M50 Master VolumeKorg Oasys 76, Oasys 88Korg Triton EX61, EX76, EX88Korg Triton LE61, LE76, LE88Korg Triton, Triton extremeKorg Triton Pro76, Triton ProXKorg TR76, TR88Korg X50 This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part. Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 7 .74*

KORG

Korg Pitch Bend Potentiometer - discontinued

1 pcs. Korg Pitch Bend PotentiometerThis is a replacement Poterntiomter for Korg Pitch Bender. This Potetniomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):THis Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .79*

Yamaha

Key contact board for FS Keyboard

Rubbercontact: 12 Contacts

1 pcs. key contact board suitable FS keyboardsThis key contact is usedWidth: 6 cmheigh: 1,4 cmContact Resitance: lower 1 Ohm

€ 34 .00*

Filter products

Korg Triton Pro