E-mu E-Synth
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM
1 pcs tactile switch suitable for E-Mu e4K all exept Rec,Play,Stop,RW,FWE-Mu E-Synth all exept Rec,Play,Stop,RW,FWE-Mu E4-XTE-Mu e6400Launch PadThis is exactly the same switch used by E-Mu on manufacturing. On this switch i am not satisfied with life span.why should I solder new pushbutton
1 pcs 65W internal Switching Power Supply Unit brand new, suitable forE-mu E4KE-mu E-SYNTHE-mu E6400E-mu E4 PlatinumE-mu E5000 UltraE-mu E6400 UltraE-mu E4XT UltraDescription:This switching power supply is a perfect replacement for many E-mu devices. In many devices Emu has used the same power supply unit.Our brand new replacement switching power supply has exactly the same mechanical dimensions and the same connectors as the original power supply. Plug and Play.63 Watt power upgrade: The original E-Mu power supply has an output of 43 Watt and must be operated with an internal fan in any case. If extensions such as additional memory or additional drives are installed, the original power supply unit will not be able to supply this power. This is where a power supply upgrade comes in handy.Our 65 Watt power supply unit also needs a fan when the E-Mu is fully extended. Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 63 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.Make absolutely sure that the connection cables to the power supply have no contact with the cooling element of the power supply. Due to the development of heat, the insulation of the cable can melt and cause a short circuit or worse tripping.
1 pcs. SIMM Socket 1,27mm 72PTechnical Hint:Mounting of this part requiers soldering.
1 pcs tactile switch suitable forE-mu E4K all without Rec,Play,Stop,RW,FWE-mu E-Synth all without Rec,Play,Stop,RW,FWE-Mu e6400E-Mu e4XT We offer here tact switch with softer tactile feeling than orignial ones. With this change you get switch with mutch higher life span (x10) than original fomr e-mu build in tact switch.why should I solder new pushbutton
1 pcs. Encoder suitable forE-MU Command Station E-MU E4K, E-SynthE-MU E4XT depends on manufacturing dateE-MU e6400 depends on manufacturing date E-MU B-3Mo Phatt rack module or keyboardE-MU Planet EarthE-MU Orbit-3E-MU Proteus 2000E-MU Vintage ProE-MU Xtreme Lead 1 or XK-6 keyboard Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedWe would like to expressly point out that the keys are used. Fatar keys tend to darken and yellow significantly. Under certain circumstances, it may be that we currently only have very darkened keys in stock.Fatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.
1 pcs. tactile switch suitable for models E-mu E4K - Rec,Play,Stop,FW,RWE-mu E-Synth - Rec,Play,Stop,FW,RWThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character / black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask.
1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m
1 pcs. triple MIDI DIN socket female 5 pin for printed circuit for E-MuJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in most e-mu sampler.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 pcs. Slide potentiometer, suitable for E-mu E4KE-Mu E-SynthThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. new Blue LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character / Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth::The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask.
1 pcs. white LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-SynthWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: Black Character / White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtion Notes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask.
1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals.Installation service for LCD Display:We are also happy to install the display for you. Please ask.
1 pcs. Phone Jack 1/4- 6.3 mm, stereo witch one Switch, for printed circuit used by E-mu E4KE-mu E-SynthE-Mu E4 XTE-Mu e6400Technical description:The offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
E-mu E-Synth spare parts easy to order online
Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. We offer in our shop E-Synth spare parts products, the brand quality continue even after replacement in the usual way. These include synthesizer replacement parts and sampler spare parts, but also encoders for E-Synth, jack socket for PCB mounting or LCD display E-mu E-Synth. One thing all E-mu spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the E-Synth replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which E-mu E-Synth button to buy, or which synth parts or sampler parts are right for the models you use. We are happy to help!
Do not compromise on quality
A system is only as powerful as its smallest component. For you, this means that E-Synth brand-quality replacement parts, which you know from the manufacturer, should be purchased and installed. This applies to E-mu E-Synth encoders as well as to the LCD display for E-mu E-Synth or any other E-mu replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an encoder for E-mu E-Synth or a button for E mu E-Synth, the same professional quality is appropriate as when a device is fully purchased. For all questions we are gladly there for you. Jack socket Printmonage? Sampler spare part? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.