Korg X-Serie

ALPS

tactile switch 9,5 mm for Korg Synthesizer

1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707 all expect 0 - 9Korg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Fatar

Contact rubber for Fatar Keyboards

Kontaktgummi: 12 Contacts

Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!! Not for use in Roland Instruments !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*

€ 10 .95*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

ALPS

tactile switch 7 mm Korg

tactile switch suitable for SW1/SW2 in models Korgi30, i30HDOasysTriton, Triton: Le, Extreme, Pro, ProXThese switch is only used for SW1/SW2 at Joystick.Korg Part Number: 375010900The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Fatar

Replacement keys and parts for Fatar TP/8S Keyboard

Taste: Key A

Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedFatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

€ 9 .75*

Synth-Parts

Replacement stereo rotary potentiometer for Korg

Replacement stereo rotary potentiometer suitable for volume control inKorg 05RWKorg TR RackKorg X5DRThis volume control is no longer available by Korg. The here shown replacement pot is build with a 2,5 mm longer axis.Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in two rows in a distance of 2,5 mm (pitch). At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .89*

Fatar

Replacement keys and parts for Fatar TP/7 Keyboard

Taste: Key A

Replacement keys and spare parts for Fatar TP/7 Keyboard Fatar TP/9 keyboard is a touch sensitive keyboard with unweighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 14,5 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is not worked out. The distance from the front side of the key is 9,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

Variants from €2.75*

€ 9 .29*

Fatar

Replacement keys for Fatar TP/9 Keyboard, weighted

Taste: Key A

Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

Variants from €5.70*

€ 8 .90*

Synth-Parts

Korg X5D OLED Display NEW, LCD Replacement

Color: Blue

1 pcs. Korg X5D OLED Display New forReady to plug in OLED Display for replacement in Korg X5D. No soldering is required.Mechanical modification is required.The original LCD display in the Korg X5D is screwed onto fixed mounting bolts, whereby the distance to the front panel is fixed. Since the OLED display is much flatter than the original LCD display, there is a tunnel effect with the OLED. It is possible to shorten the mounting bolts in the Korg X5D. This work requires skill and good fine motor skills.For the actual assembly of the new OLED display in the Korg X5D only a screwdriver is required.Scope of delivery of the OLED Display Set:OLED Display ready wiredPlease choose you favorit color. Lifetime of OLED Display:The lifetime is specified by the manufacturer with 40,000 to 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 78 .99*

ALPS

Korg X2, X3, X5 Volume Slide Potentiometer

1 pcs. Korg X2 Volume Slide PotentiometerKorg X2Korg X3Korg X5Korg X5DOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Filter products

Korg X-Serie