Technics PR-Serie E-Pianos

Synth-Parts

Technics Pedalcable No2

1 pcs. Technics Pedalcable No2Pedal cable (2 meter) with plug used by Technics E-Piano models.Technics PC26Technics PR305Technics PR307Technics PR336Technics PR54Technics PR602Technics PR700Technics PR702Technics PR604Technics PR804Technics PR900Technics PR902Technics PR1000Technics PX201Technics PX203Technics PX207Technics PX224Technics PX332Technics PX336Technics PX662Technics PX663Technics PX664This cable is also used on other Technics E-Piano modell but the pin assignment differs.The cable fits variants with 3 pedals and has a 4 pol mini Din plug.Handcrafted faithfully reproduction made by Synth-Parts

€ 38 .50*

Synth-Parts

Hammer Felt 1 for Technics E-Piano Keyboard

1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*

Synth-Parts

Hammer Felt 2 for Technics E-Piano Keyboard

Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.

€ 10 .48*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

ALPS

Encoder 12 mm Technics short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsTechnics KN5000Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

Technics

Hammer for Technics E-Piano Keyboard

Hammer: Hammer black key

Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top.

€ 9 .39*

Synth-Parts

Plastic grease for Technics Keyboards 30g

30 g can of plastic grease for Technics keyboardswe offer here a grease that is specially made for plastic parts.Especially for Technics keyboards we have collected very good experience.This plastic grease has good creep properties that are only partially desirable for a keyboard. Please apply only very sparingly so that the grease is not deposited on the felts.Not to be used for Fatar keyboards.For moving plastic parts.

€ 13 .49*

Technics

Key Guide NEW for Technics E-Piano Keyboard

Replacement–set for broken key guides on Technics electric pianosWith Technics electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for Technics, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Technics key guides in an identical way. Therefore we offer you a matched spare part set for your Technics piano in our store. Why we don't have the parts rebuilt?For the reproduction of a plastic part, an individually made injection mold must be produced. Due to the rather special shape of the original key guide, the effort is very high and expensive. This would drive up the final selling price dramatically and would simply not be profitable for us. But since we have tested our product extensively, we can sell our alternative with a clear conscience. So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. You will also receive a printed manual with the product when you order it. Included in the set:– Matched tube suitable for a keyboard with 88 keys.– Special keyboard grease– Instruction manualWhen replacing the key guides, it is necessary to grease the new parts. For this reason, a suitable grease especially for electric pianos is included in the set.

€ 37 .50*

Technics

Technics RH3 Tastatur hammer lower limit felt

1 Pc. Technics Lower Hammer Stop Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times.

€ 10 .95*

Synth-Parts

Technics Pedalcable No1

1 pcs. Technics Pedalcable No1Pedal cable (2 meter) with plug used by Technics E-Piano models.Technics PC15Technics PC25Technics PR554Technics PR603Technics PR663Technics PR703Technics PR903This cable is also used on other Technics E-Piano modell but the pin assignment differs.The cable fits variants with 3 pedals and has a 4 pol mini Din plug.Handcrafted faithfully reproduction made by Synth-Parts

€ 39 .50*

ALPS

Volume Slider for Technics

1 pcs. Slidepotentiometer with 25mm Travel. Suitable for Volume Slider forTechnics PR-Serie E-Pianos Technics PX-Serie E-Pianos Technics P-Serie Stage-Pianos These potentiometers fit the vast majority of Technics keyboard instruments. There are few exceptions where this does not fit. Please look ahead.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .75*

Technics

Replacement keys for Technics SK25 Keyboard, purwhite

Key: Key A

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

€ 12 .48*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Technics

Cap quadratic for power switch in Technics E-Pianos

Cap quadratic for power switch suitable in Technics E-PianosTechnics PX101Technics PX103Technics PX107Technics PX111

€ 7 .90*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

€ 9 .52*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with brown line

€ 9 .52*

Technics

Power Switch Assembly 60 cm for Technics E-Pianos

Power Switch Assembly 60 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 60 cm

€ 19 .90*

Technics

keyboard cover toothrack right for Technics E-Pianos

1 pcs tooth rack for keyboard cover guide right for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic

€ 14 .90*

Technics

keyboard cover toothrack left for Technics E-Pianos

1 pcs tooth rack for keyboard cover guide left for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic

€ 14 .90*

Technics

Holder QMRG7029A for Technics E-Pianos

1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic

€ 4 .76*

Technics

Holder QMRG7028for Technics E-Pianos

1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic

€ 4 .76*

Synth-Parts

MOSFET FS30KMJ-03

1 pcs. FS30KMJ-03Pch Power MOSFET Housing: TO220VDss: - 150VId: - 30APd: 35WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.

€ 4 .96*

Synth-Parts

MOSFET FX30KMJ-03

1 pcs. FX30KMJ-03Pch Power FX30KMJ-03 Housing: TO220VDss: - 30VId: - 30APd: 25WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.

€ 4 .96*

Operational Amplifier M5238AL, SIL8

1 pcs. M5238AL Dual Operational Amplifier with low noise for audio applicationThis OP-Amplifier is downgrade compatible with:M5218ALMechanical Description:The Amplifier is housed in a SIP 8 package and is designed for trughhole mounting on a circuit board. The Amp has 1 x 8 connecting pins with grid of 2.54 mm.

€ 4 .17*

Filter products

Technics PR-Serie E-Pianos