Technics PX-Serie E-Pianos

Nichicon

Bipolar Capacitor 1uF/50V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 1uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .93*

Synth-Parts

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125 Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .44*

Synth-Parts

Hammer Felt 2 for Technics E-Piano Keyboard

Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.

€ 10 .48*

Synth-Parts

Hammer Felt 1 for Technics E-Piano Keyboard

1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*

E-Switch

Single pole push switch, 250V/5A with solder lugs SDDLD10900

Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Technics

Hammer for Technics E-Piano Keyboard

Hammer: Hammer black key

Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top.

€ 9 .39*

Synth-Parts

Plastic grease for Technics Keyboards 30g

30 g can of plastic grease for Technics keyboardswe offer here a grease that is specially made for plastic parts.Especially for Technics keyboards we have collected very good experience.This plastic grease has good creep properties that are only partially desirable for a keyboard. Please apply only very sparingly so that the grease is not deposited on the felts.Not to be used for Fatar keyboards.For moving plastic parts.

€ 13 .49*

Technics

Key Guide NEW for Technics E-Piano Keyboard

Replacement–set for broken key guides on Technics electric pianosWith Technics electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for Technics, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Technics key guides in an identical way. Therefore we offer you a matched spare part set for your Technics piano in our store. Why we don't have the parts rebuilt?For the reproduction of a plastic part, an individually made injection mold must be produced. Due to the rather special shape of the original key guide, the effort is very high and expensive. This would drive up the final selling price dramatically and would simply not be profitable for us. But since we have tested our product extensively, we can sell our alternative with a clear conscience. So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. You will also receive a printed manual with the product when you order it. Included in the set:– Matched tube suitable for a keyboard with 88 keys.– Special keyboard grease– Instruction manualWhen replacing the key guides, it is necessary to grease the new parts. For this reason, a suitable grease especially for electric pianos is included in the set.

€ 37 .50*

ALPS

Volume Slider for Technics

1 pcs. Slidepotentiometer with 25mm Travel. Suitable for Volume Slider forTechnics PR-Serie E-Pianos Technics PX-Serie E-Pianos Technics P-Serie Stage-Pianos These potentiometers fit the vast majority of Technics keyboard instruments. There are few exceptions where this does not fit. Please look ahead.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .75*

CUI Inc.

MINI DIN male 4 pin for Technics E-Pianos

Mini Din plug male 4 pin for printed circuitthis mini din plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN plugs. It can be a 4 pole or a 8 pole version.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .21*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Technics

Jack Circuit QJBG2196 for Technics, used

1 pcs. Jack Circuit QJBG2196 for Technics, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111Pedal Socket: Mini Din 4 PolThese board is tested by us and fully working. We sell it with one year warranty.

€ 37 .00*

Technics

Cap quadratic for power switch in Technics E-Pianos

Cap quadratic for power switch suitable in Technics E-PianosTechnics PX101Technics PX103Technics PX107Technics PX111

€ 7 .90*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

€ 9 .52*

Technics

Button 6x small for Technics PX1XX

1 pcs. Button 6x small forTechnics E-PianoDo you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Technics Instruments and is build for a Casing Window of 10 x 10 mm. This part has six Buttons.Practical tip:This button sits between PCB and Cassis.

€ 9 .50*

Technics

Power Switch Assembly 100 cm for Technics E-Pianos

1 pcs. Power Switch Assembly 100 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 100 cm

€ 19 .90*

Technics

keyboard cover toothrack left for Technics E-Pianos

1 pcs tooth rack for keyboard cover guide left for Technics E-Pianos PX-1XX Series This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic

€ 14 .90*

Technics

keyboard cover toothrack right for Technics E-Pianos

1 pcs tooth rack for keyboard cover guide right for Technics E-Pianos PX-1XX SeriesThis rack is mounted inside the E-Piano. On this rack runs the keyboard cover.This rack is made of plastic

€ 14 .90*

Technics

AC-IN socket housing for Technics E-Pianos

AC-IN socket housing for Technics E-PianosThe speaker output is closed.This housing is made of plastic

€ 16 .90*

Technics

MIDI socket housing QGKG0076 for Technics E-Pianos

1 pcs. MIDI socket housing QGKG0076 for Technics E-PianosThis housing is made of plastic

€ 16 .90*

Technics

Holder QMRG7029A for Technics E-Pianos

1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic

€ 4 .76*

Technics

Holder QMRG7028for Technics E-Pianos

1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic

€ 4 .76*

Technics

MIDI socket housing QGKG0076A for Technics E-Pianos

1 pcs. MIDI socket housing QGKG0076A for Technics E-PianosFor MIDI Board with tuneThis housing is made of plastic

€ 16 .90*

Technics

Cover Technics PX111

1 pcs. Cover Technics PX111Under this Cover htere are User control buttons and switch.Used item, maybe there are some scratches !!!

€ 48 .99*

Technics electric piano series PX100'er

Under the brand name Technics came at the end of the 1980'er years the electric piano series PX100 on the market. The series included the models PX101, PX103, PX107 and PX111. The models were available in black and walnut veneer. These Technics electronic keyboard instruments have been offered in the upscale price range and are also accommodated by the sound quality and processing of the instruments. The price of the entry-level model was 1.500, - Euro. The top model, PX107 was offered for 2.200, - Euro.

Repair of a Technics E-Piano PX103

This Technics e-piano series is characterized by its excellent build quality. The keyboard is designed to be very durable and the wear is low. A weak spot has appeared after many years of operation. In electronics, the aging of electronic components leads to a defect. This defect manifests itself in that while the operating light on the front of your e-piano lights, but there is no sound to hear. Even a test of the headphone output shows the same negative result. We are well aware of this error and we can repair this defect with manageable effort. After the successful repair, there is nothing to stand in the way of a long electric piano life and you will enjoy your keyboard instrument for many years to come.

If you have a defect in your instrument, please contact us or a specialist company in your area who can repair your electric piano. In many cases, it is sufficient for us to send electronic components. We can repair these professionally. When installing and removing electronics assemblies, you are welcome to contact a specialist company on site or a recognized specialist company in electrical engineering.

Filter products

Technics PX-Serie E-Pianos

Technics electric piano series PX100'er

Repair of a Technics E-Piano PX103