Skip to main content Skip to search Skip to main navigation

Filter products

Integrated circuits

Xvive Audio

Average rating of 0 out of 5 stars

Xvive MN3009 256 Stage BBD DIP8
1 pcs. Xvive MN3009 256 Stage BBD DIP8  -   Panasonic MN3009 cloneRebuild of the MN3009 BBD from Panasonic. We think that it is a 1:1 clone from original Panasonic Chip. Comment from a college:Noise level and spectrum similar to that of an intact Panasonic MN3009. In direct comparison with a usual defective Panasonic chip (which still works, but just typically rushes) was the difference between sea surf and reasonably constant background noise clearly. That is spoken in some forums of completely noise-free, I can not understand ..... FeaturesVariable delay time from 0.64ms to 12.8msWide dynamic range 88dB (typ)Total harmonic distortion <0.3%Clock frequency from 10Hz to 200KHz Package: DIP-8    Mechanical Description:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board. THis chip is pin compatible to Panasonic MN3009.ICs are sensitive to static charge! Handle with care. Semiconductors are excluded from exchange.   

€ 12 .95*
Xvive Audio

Average rating of 0 out of 5 stars

Xvive MN3007 1024 Stage BBD DIP8
1 pcs. Xvive MN3007 1024 Stage BBD DIP8  -  Panasonic MN3007 cloneRebuild of the MN3007 BBD from Panasonic. We think that it is a 1:1 clone from original Panasonic Chip.  Features Variable delay time from 5.12ms to 51.2msWide dynamic range 80dB (typ)Total harmonic distortion <0.5%Clock frequency from 10Hz to 100KHz Package: DIP-8 Mechanical Description:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board. THis chip is pin compatible to Panasonic MN3007.ICs are sensitive to static charge! Handle with care. Semiconductors are excluded from exchange.   

€ 12 .34*
Synth-Parts

Average rating of 0 out of 5 stars

SIMM Socket 1,27mm 72P
1 pcs. SIMM Socket 1,27mm 72PTechnical Hint:Mounting of this part requiers soldering. 

€ 14 .49*
Analogue Renaissance

Average rating of 0 out of 5 stars

Wave Generator D5534A clone
1 pcs. Wave Generator IC D5534A clonewe offer here a brand new clone of the original Roland Wave Generator Chip with some Mechanical Description:This Chip is manufactured by Analogue Renaissance with modern and actual SMD technic. The outline Dimensions and Pin configuration are same as the original Roland Wave Generator Chip MC5534A.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are  

€ 34 .50*
Analogue Renaissance

Average rating of 0 out of 5 stars

Roland 80017A VCF VCA clone
1 pcs. Roland 80017A VCF VCA clonewe offer here a brand new clone of the original Roland Voice Chip with some Mechanical Description:This Voice Chip is manufactured by Analogue Renaissance with modern and actual SMD technic. The outline Dimensions and Pin configuration are same as the original Roland Voice Chip 80017A.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are  

€ 58 .80*
Synth-Parts

Average rating of 0 out of 5 stars

CD4052BE Multiplexer, DIP16
1 pcs. CD4052BE Multiplexer, DIP16Mechanical Description:The Multiplexer is housed in a DIP 16 package and is designed for  mounting on a circuit board. The Logic Circuit has 2 x 8 connecting pins with grid of 2.54 mm x 6.6 mm.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are

€ 1 .49*
Synth-Parts

Average rating of 0 out of 5 stars

Roland MKS-50 OS Version 3.0
1 piece EPROM with ROLAND MKS-50 OS version 3.0 with OLED Support.we offer here a Customized OS version for the Roland MKS-50. This OS version is required if a new OLED display is to be installed in the MKS-50.Mounting instructions for the EPROM in the Roland MKS-50:Soldering may be required if the EPROM in the Roland MKS-50 is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version. 

€ 23 .49*

Average rating of 0 out of 5 stars

ITT SAJ110 - 7 Stage Frequency Divider IC
1 pcs. ITT SAJ110 - 7 Stage Frequency Divider ICOld stock - every single component has been checked by us for function.Housing is manufactured in red and black. FeaturesClock frequency from 20Hz to 20KHz Package: DIP-14    Mechanical Description of SAJ110:The IC is housed in a DIP 14 package and is designed for trughhole mounting on a circuit board.ICs are sensitive to static charge! Handle with care. Semiconductors are excluded from exchange.  

€ 19 .74*
Panasonic

Average rating of 0 out of 5 stars

MN3101 BBD Driver DIP8
1 pcs. MN3101 BBD Driver DIP8Panasonic MN3101 CMOS Clock Generator/Driver for Low Voltage Operation BBD DIP8This IC is out of production. Mechanical Description:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board. THis chip is pin compatible to Panasonic MN3009.ICs are sensitive to static charge! Handle with care.Semiconductors are excluded from exchange.  

€ 5 .36*
Synth-Parts

Average rating of 0 out of 5 stars

IC Socket 17P for D5534A
1 pcs. IC Socket for D5534ATechnical Hint:The IC socket has 17 legs with a grid of 2 mm. The IC D5534A has 16 legs + an empty position as a built-in marker. I think it makes sense to take over this empty position for the IC socket as well. The corresponding soldering pin can be easily pushed out.Mounting of this part requiers soldering. 

€ 1 .99*
Synth-Parts

Average rating of 0 out of 5 stars

Flash Rom MBM29LV160BE90TN replacement equivalent
1 pcs. Flash ROM 16Mas replacement for MBM29LV160BE90TN Mechanical Description:This flash rom is housed in a TSOP48 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge  

€ 24 .49*
Yamaha

Average rating of 0 out of 5 stars

Yamaha PWM IC XK413A0
1 pcs. Yamaha spezial IC for Power SupplyWe offer here a replica of the original Yamaha Power Stream IC. The replica is developed and distributed by Yamaha.Manufactured in modern SMD technology. With this your Disklavier will be functional again.Safety notice:Switching power supplies store high voltages of approx. 300 volts DC over a long period of time. This spare part is only for specialists with appropriate knowledge of electrical engineering.Technical Hint:This replica of the XK413A0 is a 1:1 replacement of the original Power Stream IC used by Yamaha in various switching regulator power supplies.Practical hint:The IC is firmly soldered onto a circuit board. Manual dexterity and experience in soldering are required for replacement.IC's are sensitive to static charge!  

€ 547 .40*
Synth-Parts

Average rating of 0 out of 5 stars

Roland Juno 1 OS Version 4.0 EPROM
1 piece EPROM with ROLAND JUNO 1 OS version 4.0 with OLED Support.This OS works only in Juno-1.we offer here a Customized OS version for the Roland Juno1 . This OS version is required if a new OLED display is to be installed in the Juno1 .Mounting instructions for the EPROM in the Roland Juno1 :Soldering may be required if the EPROM in the Roland Juno1 is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version. 

€ 23 .49*
Yamaha

Average rating of 0 out of 5 stars

IC PST518B
1 pcs. IC PST518BSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 5 .63*
Yamaha

Average rating of 0 out of 5 stars

IC NJM2068LD EMX2000
1 pcs. IC NJM2068LD EMX2000Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 3 .81*
Yamaha

Average rating of 0 out of 5 stars

IC LC9007B-128 SHS10
1 pcs. IC LC9007B-128 SHS10Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 10 .46*
Yamaha

Average rating of 0 out of 5 stars

IC YM3029 DAC SY77,55,TG77,55
1 pcs. IC YM3029 DAC SY77,55,TG77,55Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 38 .56*
Yamaha

Average rating of 0 out of 5 stars

IC YM2424 OPZ2 V50
1 pcs. IC YM2424 OPZ2 V50Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 43 .57*
Synth-Parts

Average rating of 0 out of 5 stars

D/A-Converter PCM61P, DIL16
Digital-Analog-Converter for audio application for Roland E-PianosPCM61P - upgrade to PCM56PThis part is used from RolandRoland      part number:15209160   Resolution:                    18bitInterface:                      seriellConversion rate:            666kS/sNumber of DAC outputs: 2Number of channels:      1Case:                           DIP16warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical Description:This D/A converter is a total compatible performance replacement to PCM56 DA Converter. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. The conversion rate is 666kS / s. For operation, no external components, such as temperature compensation or similar is required.It is a symmetrical supply voltage of +- 5V to +- 12V needed.  

€ 23 .80*
Synth-Parts

Average rating of 0 out of 5 stars

D/A-Converter PCM56P, DIL16
Digital-Analog-Converter for audio application for Roland E-PianosPCM56P von Texas InstrumentsThis part is used from RolandRoland      part number:15209122   Resolution:                    16bitInterface:                      seriellConversion rate:            666kS/sNumber of DAC outputs: 2Number of channels:      1Case:                           DIP16warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 16 bit resolution. The conversion rate is 666kS / s. For operation, no external components, such as temperature compensation or similar is required.It is a symmetrical supply voltage of +- 5V to +- 12V needed.

€ 28 .67*
Synth-Parts

Average rating of 0 out of 5 stars

D/A-Converter PCM54HP, DIP28
1 pcs. PCM54HP - Digital-Analog-Converter for audio application von Burr BrownThis part is used inKorg M1Korg T1Korg T2Korg T3   Resolution:                    16bitInterface:                      parallelCase:                           DIP28warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 28 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 2.54 mm x 15.24 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is parallel and provides a 16 bit resolution. It is a symmetrical supply voltage of +- 5V to +- 12V needed.

€ 17 .85*

Average rating of 0 out of 5 stars

OP-Amp BA15532F, SOP8
BA15532 Dual Operational Amplifier with low noise for audio applicationMechanical Description:The Amplifier is housed in a SOP 8 package and is designed for SMD mounting on a circuit board. The Amp has 2 x 8 connecting pins with grid of 1.27 mm x 4.4 mm.

€ 2 .87*

Average rating of 0 out of 5 stars

Operational Amplifier M5238AL, SIL8
1 pcs. M5238AL Dual Operational Amplifier with low noise for audio applicationThis OP-Amplifier is downgrade compatible with:M5218ALMechanical Description:The Amplifier is housed in a SIP 8 package and is designed for trughhole mounting on a circuit board. The Amp has 1 x 8 connecting pins with grid of 2.54 mm.

€ 4 .17*
Yamaha

Average rating of 0 out of 5 stars

Yamaha PROM #39
EPROM für Yamaha E-PianosPROM#39This part is used inYamaha PF10Yamaha PF15     

€ 44 .49*

IC - Integrated Circuits as Spare Parts for Musical Instruments

In the field of musical instruments, there is often the problem that spare parts are no longer available. Support from manufacturers such as Roland, Korg, or Yamaha has long been discontinued. Especially from these manufacturers there are many analogue synthesizers from the 1980s or the 1970s, in which many special ICs were built in, which are no longer available today. Many of these ICs have not been produced for many years, they were discontinued by the suppliers years ago due to changed requirements and thus the decreasing demand, i.e. the suppliers announced that this or that component would no longer be produced in the future.

Obsolete ICs and transistors

In many cases, however, we are able to procure electronic components that have long been taken out of production.
Another possibility is to look for a suitable replacement type and use it instead of the original component. Although this often involves partial modification of the installation situation, it can save the cherished electronic musical instrument from an inglorious end in electronic scrap. However, for many components and integrated circuits that have long had "end of life" status, there are still stocks available worldwide. We have set ourselves the task of finding such stocks and making them available to the market.

Over the past years, we have built up good relationships with reliable suppliers worldwide. Through them, we obtain many ICs that have not been produced for a long time. We offer the chips you need for your repairs. Since we repair musical instruments such as electric pianos, synthesizers, workstations and keyboards in our specialist workshop, we know which ICs often break and are therefore needed.